Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair To Various Internal Roads, Hardstanding, Pcc Road Including Certain Road Furniture And Allied Infra At Various Location In The Aor Of Age B/r-i Under Ge 969 Ews in Baramulla, Jammu & Kashmir, with an estimated contract value of Rs. 48,00,000. The bid opening date for this tender is 24-10-2026 and the last date for bid submission is 16-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - JK Tender

Opening Date24 Oct 2026
Closing Soon16 Nov 2026
Tender Amount₹ 48,00,000 
Notes
Download

Costs

Summary

Repair To Various Internal Roads, Hardstanding, Pcc Road Including Certain Road Furniture And Allied Infra At Various Location In The Aor Of Age B/r-i Under Ge 969 Ews

Description

Cwek/t-72/969 Ews/2026-27 Repair To Various Internal Roads, Hardstanding, Pcc Road Including Certain Road Furniture And Allied Infra At Various Location In The Aor Of Age B/r-i Under Ge 969 Ews

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M&L for premix bituminous, macadam consolidated thickness, 75mm or less using 4% binder i.e. paving bitumen grade VG 30 by weight of total mix and aggregate mixed in computerized hot mix plant laid rolled and compacted to required gradient and camber with the help of mechanical paver and power rolled 8 to 10 tonne capacity complete all as specified and directed.

210

-

-

... More
M&L for bituminious premix semi dense alphaltic concrete 30mm (consolidated thickness) using paving bitumen of grade VG-30 with 5,5% binder content by weight of total mix, mixed in computerised Hot Mix Plant and spread by means of Self Propelled Mechanical Paver, rolled and compacted to required cabmer and gradient by using mechanical power road roller of 8 to 12 tonne capacity including applying evenly tack coat with bituminous primer using paving bitumen of grade VG10 @ 5 Kg/ 10 Sqm on existing black top surfaces complete all as specified and directed. Notes for ser item No 4 & 5: (i) Preparation of mix in hotmix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible and has to maintain the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with depolyment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable. (ii) Central computerised Hot mix plant of adequate capacity shall be used for heating and mixing of constituents for preparation of bituminous macadam and the same shall be laid with mechanical sensor paver all as specified and directed. (iii) Over newly provided bituminous macadam surfaces, further bituminous work, if ordered, shall be provided simultaneously after provision of bituminous macadam & nο separate payment for provision of tack coat for bonding between the bituminous macadam & further bituminous work necessitated due to the time period gap or otherwise shall be made for separately. (iv) The Design mix shall be carried out from the Zonal lab/ Govt approved lab/Govt Engr College as approved by GE and design mix shall be got approved by GE before execution of the work. (v) The cost of all the above aspects shall be deemed to be included in the quoted rates of above item.

280

-

-

... More
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

110

-

-

... More
Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level) complete all as specified and directed.

58.5

-

-

... More
M&L for 75mm thick cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base of floors, finished even and fair over well/rammed/compacted earth complete all as specified and directed.

480

-

-

... More
M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compactions by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Note: Only punned down thickness of sand cushion shall be measured for payment.

200

-

-

... More
S&F chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.

100

-

-

... More
M&L for providing cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stop, rounded or chamfered on edges complete all as specified and directed.

5

-

-

... More
M&L cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less and finishing the surface with brooming, complete all as specified and directed.

36

-

-

... More
M&L for formwork to edges of concrete flats, threads, threads, bricks in floors, opening in concrete walls, floor and roofs n.exc 200mm wide and sides of RCC/PCC bend in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and directed.

100

-

-

... More
M&L forming 12mm thick expansion joints for 150mm thick concrete, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A', complete all as specified and directed.

1.9

-

-

... More
M&L forming contraction (dummy) joints 65mm deep x 10m wide, filled with sealing compound `A' Grade complete all as specified and directed.

8

-

-

... More
M&L forming construction joint 150mm deep x 10mm wide filled with sealing compound complete all as specified and directed.

2

-

-

... More
S&F solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc including dismantling and cost of retrieved items obtained from site complete all as specified and directed.

43

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.