Lakes And Waterways Development Authority Tender

Providing wood work in frames of doors, windows, clerestory windows , etc sawn complete 2nd class kail wood

Wooden planking, tongued and grooved in Hooring including fixing with iron screws complete:Second class deodar wood 40 mm thick

Providing and fixing of ornamental type vertical posts of first class deodar wood of approved pattern and design including providing and applying two or more coats of touch wood polishing etc. complete in all respects.(size 9” x 9"dia. 9'.0" height)

Providing and fixing of horizontal posts railing of first class deodar wood of approved pattern and design including providing and applying two or more coats of touch wood polishing etc. complete in all respects.(size 3” x 4")

Providing and fixing of verticle posts( surya) 2-'6'' including providing of king post as per requirements at site of first class deodar wood of approved pattern and design with wood carving including providing and applying two or more coats of touch wood polishing etc. complete in all respects

Providing hoisting and fixing trusses / purlins raftrs / posts / post plates or like components including cost of screws etc. complete of 2nd class Budloo wood.include fixtures

Providing and fixing track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalume steel. The sheets shall have wide panes with 3 No. stiffing ribs, effective water shedding and special male/female ends with fuil return legs on side lapps for purlins support and anti capillary flute inside lapp. The sheets shall have a hot dip metallic coated of zinc and aluminum (150 gms/sm) zinc/aluminum coating mass total on both side AZ-150 as IS-1397,550 PMA, yeild stress. Providing silicon modified polyester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area).50mm (Including cost of ridges / valleys of plain colour coated sheets complete job

Providing and Fixing of khatambandi in ceilings of approved pattern / design incld. cost of screws / nails & sca-folding charges incld. cost of rough ceiling of 12mm thick ply wood & supporting frame work / all carriages of material upto site of work complete ( First class Budloo wood) including providing & appling two or more coats of touch wood polishing complete in all respects.

Providing and Fixing of ornamental wooden eaves boarding (size 300x35mm) of approved pattern & design of Ist. class kail wood including cost of nails and touch wood polishing complete all. wood carving design as per site incharge

Providing and Fixing of 12mm thick wooden paneling (T&G) of Ist class kail wood free from knots including cost of head less nails with scaffolding charges and carriage of material including cost of wooden frame work of budloo wood / 12mm thick ply board and touch wood polishing (two or more coats) complete in all respects.

Providing and Fixing 20mm thick ornamental panels of (PINJARA KARI Work) as per approved pattern / design (Ist. class kail wood) with necessary screws & beading and including providing and applying of touch wood polishing (two or more coats) complete in all respects.

Providing and Fixing 20mm thick ornamental panels of deodar work as per approved pattern / design (Ist. class kail wood) with necessary screws & beading and including providing and applying of touch wood polishing (two or more coats) complete in all respects.

Providing and Fixing of steel of hold fast of flat iron 60 mm x 6 mm of length 2 '-0'' to increase the strength of base of truss complete kincluding providing and driving of bolts and nuts complete including bending as well

Providing and Fixing of lighting points , one light point shall including wiring for light point 1.5sqmm pvc insulated copper wire & 2.5sqmm PVC insulated multistandard copper wirefor lighting sub-main, 6amp one way switch, 2mm thick pvc condute/channel bends junction box etc, 6amp spole Mcb 10amp Dp Mcb 2way DB for housing MCB and hylem sheet wire of havels /anchor with same acessories / 3 pin socket with switch

Providing and Fixing of recess mounted , compact vertical round shaped downlighter Led lamps of 15 watt led 3000kincluding all of approved make( havels, Philiphs)

Providing and fixing of Float glass panes of thickness 4 mm ( weight not less than 10 Kg/ sqm. With wooden beading of approved design/ pattern qty vide pinjara