Jammu And Kashmir State Sports Council Tender

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering incl. all carriage . a) 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone crushed aggregate 20 mm nominal size)

Steel reinforcement for RCC work incl. straightning,cutting,hoisting,placing in position all complete(TMT Bars incl. Carriage)

Centering and shuttering incl. strutting, propping etc. and removal of form for: a) Foundations, Footings, bases of columns etc.

Providing and fixing of wood work in imported wood

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in 1:6 mix ( 1 cement : 6 course sand) mortar incld. all consequential and incidental costs like all leads, lifts, carriages , scaffolding and curing complete job.

15mm Thick Cement plaster in 1:4 mix incl. all carriages complete

Steel work in single up sections with or without connecting plates including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in frames, gates and similar works (as per approved design).

Providing and fixing HI RIB precoated galvalume profile sheets 0.53mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fastners of reputed make and fixing flashings, valleys and ridges of colour coated galvalume plain sheet using incl. verticle/curved surface fixed with self drillen dash fasteners or polymer coated J or L Hooks, bolts and nuts 8mm dia with bitumen and GI Limpet washers excl. the cost of Purlins, rafters and trusses and but incl cutting to size and shape wherever required all complete.self drilling and self tapping fasteners of reputed make complete and as directed. the contractor shall have to provide a minimum 5 years warantee for sheets against deterioration, disintegrations loss of luster, variation in colour shade etc. and leakages across laps, fasteners etc. all types of steel sheets shall be load tested to satisfy 1.10 times the design wind load and coating thickness to the satisfaction of the Engineer-In-Charge.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters: 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer (Birla White or equivalent) over the plastered wall / ceiling surface to prepare the surface even and smooth. Complete Job.