Jammu And Kashmir State Sports Council Tender

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20% b/stone.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.

Hand packing in wire crates with zinc coating hexagonal mesh size of 125mm with wire dia of 3.50mm with a size of crate 6m*1.20*1.20 including cost of crate and supplying of stones

Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density)

Providing, laying spreading and compacting stone aggregate of specified sizes 63 mm to 45 mm to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

Providing, Laying, spreading and compacting stone aggregate of specified sizes 53 mm to 22.4 mm to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. 16.38.1 On W.B.M. @ 0.75 Kg/sqm.

Providing and laying bituminous macadam base-course with stone aggregate of quality, size and grading as specified in CPWD specifications and straight run bitumen of grade 80/100 @ 4% by weight of total mix including hot mixing of stone aggregate and bitumen in hot mix plant, transporting mixed "material and laying mixed material with paver finisher to the required level and grade, rolling with road roller of 8 to 10 tonne capacity to achieve the required compaction and density . 50 mm compacted thickness Qty vide item no. 1 area =5892 *.05

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On bitumen surface @ 0.50 Kg/sqm.

2.5 cm premix carpet surfacing with 2.25cu.m. and 1.12 cu.m of stone chippings of 13.2 mm and 11.2 size respectively per 100 sq.m. and 52kg. and 56 kg. of hot bitumen per cu.m. of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt 80/100 heated and then mixed with solvent at the rate of grams per kg of asphalt. Qty vide item no. 1 area =5892

Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG-10 and blinding surface with 0.90 cum of stone aggregate of 6.7mm size (Passing 11.2mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface including rolling and finishing with power road roller all complete

providing and laying world athletic aproved sw (sand wich system) of thickness 13.5 mm or more with all required equipments which are required for certification complete with class 2nd certification. Aluminum Track Kerbing, powder coated, for a non-permanent install for the 400 meter oval & steeplechase.(Design-Heavy gauge aluminium features a box profile top. Held in place by 10 mm tall ribbed feet. Each section of kerbing is milled to allow easy drop in or removal of corresponding sections. Available in Raw or anodized finish. World Athletics Approved) 1 nos Hammer/Discus cage with 23’ tall doors with ground sleeves for single circle.(Design-Made of heavy duty Steel Tube, HOT GALVANIZED for long life. Poles can be detatched from centre for easy transportation and hinged for easy lifting during installation. easy to bind the poles together with the help of tie bars for sturdiness of the cage. Gates are attached to the poles using four hings and both gates include wheels for easy movement. NET is 5 mm thick ( Machine Knitted ) with 40 mm square mesh. Net is UV stabilized for long life. Steel tube is used on the top of the net to avoid sagging. Cage with Netting,World Athletics Approved.) 1 nos Aluminum Circle with Cross Bracing for Discus, powder coated white. (Design-Aluminium Discus Circle made of heavy duty aluminium. This can be folded in 2 parts for easy transportation.World Athletics Approved)1 nos Hammer Conversion Circle 6pc for the discus circle conversion to hammer. (Design-IAAF Certified conversion circle made of fiberglass section with reinforced steel. Section are designed to quickly convet the already set Discus circle to a Hammer Circle. World Athletics Approved.) 1 nos Aluminum Vault Boxes, white, pole vault boxes with the covers/lids( this includes Welded stainless steel construction. Comes with blanking board made of aluminium. Sockets at bottom for drainage of water. World Athletics Approved.) 1 nos Aluminum Circles with Cross Bracing for shot put, powder coated white. (Design-Made of thick Aluminum alloy in angle type construction. Constructed in two halves. Best quality nickel plated hardware used for assembling the unit. Easy to assemble and can be folded very easily for convenient transportation & storage. World Athletics Approved.) 1 nos Aluminum Shot Toeboards for Depressed pad.(Design-Stop board made of fibre designed for depressed pad. World Athletics Approved.) 1nos Water Jump Surface Mount Barrier for Steeplechase. (Design-Heavy duty foldable beam made square Pipe inside & covered with thick Water proof solid plywood. Base legs & base made of steel square pipe with spring loaded snap lock system for easy adjustment of three different required heights. 762m.m. , 838m.m. , 914 m.m. Legs are fitted into sockets grouted in to the ground. Painted with premium quality Poly urethane paint for longer life & durability. Easy to install & foldable to transport. World Athletics Approved.) 1nos Adjustable 12” Take Off Board Systems for NCAA long & triple jump. This product is the 8 inch wide synthetic board, with 4 inch foul board and blanking lids are required. Design take-off board system- made of solid wood. Welded aluminium tray protects take-off area and facilitates easy replacements of take-off board and plasticine(Synthetic) board. Comes with heavy construction aluminium blanking lid for durability.World Athletics Approved. 1 nos

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering incl. strutting, propping etc. and removal of form work for including all leads, lifts and carriage complete: Foundation, footings, bases of columns etc. for mass concrete

shuttering for suspended floors

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

edges of slab

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars

Carriage of Stone for a distance of 500 mtr by h/l

Stone Aggregates above 40mm avg lead 20.0 km

Stone Aggregates and sand below 40mm avg lead 55.0 km