Jammu And Kashmir State Sports Council Tender

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering huttering finishing and reinforcement. All works upto plinth level (1:1.5:3) including carriage

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1.5:3

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc.

Centering and shuttering including strutting, propping etc. and removal of form for:Columns, piers, abutments, pillars, posts and struts

Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly einforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and ecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single toughned glass pane lazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

Providing and fixing factory made UPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly forced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).

Providing and fixing with High rib profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters incl all carriages upto site of work0.53 mm thick

Steel reinforcement for R.C.C. work ready to use "cut and bend"rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and fixing Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

PUF insulated sandwich panels consisting of an insulating layers of rigid core sandwiched between two layers of structural board,used as a building material.the board cab be ,ACP and insulation core will either be polyurethane faom(PUF).incl providing and fixing of all allied features

Syntehtic Surface flooring : Earth work in excavation by manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 50mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All Kinds of Soil

Supply and laying of dry stone solling dully hand packed incl. spreading, levelling and consolidation with PRR of 8-10 Tonne capacity upto required gradient incl. all carriage complete job.

Supply & stacking of graded stone aggregate,stone screening and binding material at site incl. laying of water bound macaddam with specified stone aggregate, stone screening and binding material incl. screening, sorting, spreading to template and consolidation with PRR of 8-10 Tonne capacity etc. complete with all carriage. Base course with stone aggregate 63-45mm incl. stone screening 13.2mm

Providing and laying wet mix macadam on prepared sub grade/sub base with crushed quarry stone aggregate of specified grading as per IRC/MOST specification including mixing crushed material with predetermined quantity of water in accordance with specification to form dense mass which is spread and rolled with vibratory roller 80/100KN capacity speed of which should not exceed 5KM/Hour for each layer, rolling should continue till 98% density is achieved to approved grade and X-section the mixing is to be prepared in approved mech, mixing plant of suitable capacity including laying of cold emulsion with pressure sprayer at the rate 0.75 kgs/sqm complete, including cost of all materials, all leads lifts octroi charge taxes etc.

Providing and applying tack coat using hot straight run bitumen of grade 80/ 100Including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface to remove all dirt, dust, mud etc. and finally booming the surface as per specifications.On W.B.M.@ 0.75 Kg/sqm

Providing and laying 50mm thick premix bituminous macadam base course with stone aggregate of quality size and grading as specified in MORTH and straight run bitumen of grade 80/100 @3% by weight of total mix @ 60kg/cum including hot mixing of stone aggregate and bitumen in hot mix ,plant transportation and laying mixed material with paver finisher to the required level and grade incl. rolling with road roller of 8-10 tonne capacity to achieve the require compaction and density (including cost & carriage of tar & allied materials involved complete.)

Providing and laying 25mm thick Semidence bituminous concrete using material aggregate satisfying the gradation set out in specification with 5% binder content (by weight of total mix) bitumen of grade 80/100 @2.88Kgs/sqm with the aid of hot mix plant and paver finisher including rolling with 8-10 tonne capacity to achieve the require compaction and density (including cost & carriage of tar & allied materials involved complete.)

Providing laying &compaction 6mm thick seal coat of pre mixed fine aggregate passing 2.36mm & retained on 180 micron sieve with bitumen 128kgs of bitumen of grade 80/100 bitumen per cum of fine aggregate (0.768kgs/sqm) 0.6cum of fine aggregate per 100sqm of road surface including rolling & finishing complete as per MORTH specification including rolling & finishing complete (including cost & carriage of tar & allied materials involved complete.)

Providing & laying in position cement concrete of specified grade excluding the cost of centering & shuttering. All work upto plinth level.1:4:8 ( 1 cement 4 coarse sand: 8 graded stone aggregate 40mm nominal size).

1:2:4 ( 1 cement 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

Centring and shuttering incl strutting propping etc and removal of form work for foundation footing bases of columns Foundation and footing bases of column

SYNTHETIC FLOORING: Cast in situ PU synthetic flooring approved by WBF/ BFI with 8mm thick shock pad and 2mm thick PU layer.All game lines marking to be done as per international standards Of ISO 9001 & 2015 certified make.

Supply & installation of badminton post with net pulley system as approved by Engineer incharge.

consultancy charges