Jammu And Kashmir State Power Development Corporation Tender

Routine Repair and maintenance of 07 no. Electrically as well as manually operated gates of CHEP-III by way of complete Servicing and overhauling of drum which includes replacement of damaged clamp, bearing assembly, bushes of drums (2 Nos Drums each gate incase of electrically operated gates). Cleaning of all parts by using petrol ,dhoti cloth, brush etc. after complete dismantling. Applying fresh coat of grease to all the parts of gate and then assemble it properly to both electrically . Oiling to chain sprocket arrangement and rollers which includes shaft, lock pin, roller, etc. Replacement of gear oil in reduction gearbox. Removal of old cadmium compound from the steel wire rope, cleaning it properly and then applying fresh coat of cadmium compound. Cleaning of sill beam. Replacement of damaged/burnt out contractors switches, fuses, indicators etc. Job also includes complete dismantling of winch machine which include pinion, gear, gun metal bushes, etc. and cleaning of all parts by using petrol ,dhoti cloth, brush etc. Applying fresh coat of grease to all the parts of winch machine of the manually operated gates and then assemble it properly. Oiling to rollers which includes shaft, lock pin, roller, etc. ,removal of old grease from the threaded stem rod, cleaning it properly and then applying fresh coat of grease (MAKE Castrol/servo).cleaning of sill beam. Checking the manual as well as electric operation of the gates by lifting and lowering it 2-3 times. The job includes cost of material, T&P items and labour engaged for the the execution of job. Complete job.

Repair and maintenance of 6 No. manually operated gates installed at Bhaderwah HEP by way of complete dismantling of winch machine which include pinion, gear, gun metal bushes, etc. and cleaning of all parts by using petrol ,dhoti cloth, brush etc. Applying fresh coat of grease to all the parts of winch machine and then assemble it properly. Oiling to rollers which includes shaft, lock pin, roller, etc. Replacement of old/damaged nuts and bolts for seals and guide hoisting ,removal of old grease from the threaded stem rod, cleaning it properly and then applying fresh coat of grease (MAKE Castrol/servo).cleaning of sill beam. Checking the manual operation of the gate by lifting and lowering it 2-3 times. The job includes cost of materials, T& P items and labour engaged for the execution of job.(Complete Job).