Jammu And Kashmir State Power Development Corporation Tender

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing CP Brass basin mixer of quality & make as approved by Engineer in charge.15 mm nominal dia

Providing and fixing of wall cabinets 600mm,made with 18 mm thick ply including the cost of hinges,handles,locketc with outer face textured and shall also contain hangers and rails complete job as the directions of Engineer incharge.

Providing and fixing of MS collapsible shutter 14'x9' complete job as per directions of engineer incharge

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25mm dia

Providing of lighting electric points including cost of wiring, earthing,switches,MCBs,LED luminaries and cost of wiring from 1.5mm thick PRF coil.(All items should confirm to the IS codes from reputed manufacturer)

Renovation of A E Quarter

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing of wall cabinets 600mm deep ,made with 18 mm thick ply including the cost of hinges,handles,etc with outer face textured and shall also contain hangers and rails complete job as the directions of Engineer incharge.

Providing and fixing false ceiling with 18 mm thick ply or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminum primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminum (with 15 micron anodic coating) T sections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre bothways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminum frame work shall be paid separately).

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm for doors superior make as per directiond of engineer incharge

Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm for doors

Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125mm

Providing and fixing of beading around windows and door edges complete job as per directions of engineer incharge

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade andcolour.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, xcluding the cost of purlins, rafters and trusses and including cutting to sizeand shape wherever required.

Providing and fixing of battens for chajja and eaves board 2"x2" poplar wood @ 2ft c/c

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia

Providing and fixing CP Brass basin mixer of quality & make as approved by Engineer in charge.15 mm nominal dia

Honda 5 kVA Portable Petrol Generator, 1 Phase single,Brand Registered , Power 5kva,Frequency 50Hz oil Tank 25ltr

Providing, installation and testing of heating points including cost of wiring, earthing,switches,MCBs, switch boards and all accessories cost of wiring from from 2.5mm thick PRF coil .(All items should confirm to the IS codes from reputed manufacturer)

Providing and installation of 50 l ,2000Watt storage water heater( geyser) of superior quality including the cost of mounting brackets,fasteners, complete job as per directions of engineer incharge

providing and fixing of pressure pump for washrooms .5HP single phase