Jammu And Kashmir Cable Car Corporation Tender

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. (25mm thick).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete) .

Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 25 mm thick Second class deodar wood including polishing etc complete job.

Paper machie art on ceiling including the cost of painting, scaffolding, sanding, etc complete job. Design to be finalized by Engineer Incharge.

Providing and fixing of wooden vertical blinds for windows including all accessories, carriage upto site complete job.

Providing and fixing of heritage paintings/pictures including, printing, farming and procurement of pictures complete job.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

Providing and laying of hand packed stone boulder (size 150mm-230mm) before laying of mud mat compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.

Providing/ laying position cement concrete of specified grade excl. cost of centering and shuttering all work upto plinth level 1:3:8 ( stone agg. 40mm nom. Size) incl. all carriages.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more(codeno. 5.22A.6 ).

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand): Quary Stone.

Centering & Shuttering including strutting, propping etc. and removal of form work.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. (40mm thick).

12 mm cement plaster (1:4) in walls.

Constructing brick massonary in cement mix 1:4 collection chambers 750 X 750 internal size and 600mm deep fixed with C.I cover and frame 750 x 750 mm including 12 mm 1:3 plastering.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing colour coated galvalume high rib profile sheets 0.50 mm TCT having a crest height of 28-32 mm at 195 mm and effective width of 975-1000 mm and length to suit site requirements to the purlins using self drilling and self tapping fasteners of reputed make with purlin sheet using self drilling and self tapping fasteners and fixing flashings, valleys and ridges of colour coated galvalume plain sheet using self drilling and self tapping fasteners of reputed make complete and as directed. The contractor shall give a minimum of 10 yrs guarantee for sheets against deterioration, disintegration, loss of lusture, variation in colour etc and leakages across laps, fasteners etc. All types of steel sheets shall be load tested to satisfy 1.1 times the design wind load and coating thickness to the satisfaction of the Engineer Incharge. The fasteners shall also be load tested. The contractor is to submit the designs and shop drawings for approval on the sheet profile, design and fabrication details before installation (including cost of all material, leads, lifts and carriage upto site of work complete).

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete on steel work.

Providing & fixing of 25 mm thick devri stone tiles to be fixed in 1:3 cement mortar dressed up face including all carriages up to site complete job.

Providing & fixing stainless steel sliding & folding gate of 35 mm thickness of standard make including all accessories complete job.

Providing & fixing of inverter type split AC 1.5 tons with invetor technology and 5 star rating including stabilizer, cost of fittings etc complete job. (Mitsubhsi)