Islamic University Of Science And Technology Tender

1 Set of 600 Amps 4P, 50kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and above Aluminium, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar. (Busbar-I)

1 Set of 400 Amps 4P, 50kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and above Aluminium, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar.(Busbar-II)

3 No's of 320A 4P, MCCB Adjustable thermal and fixed magnetic release of fault breaking capacity 36KA (Ics=Icu=100%) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Outgoing).

2 No's of 250A 4P, MCCB Adjustable thermal and fixed magnetic release of fault breaking capacity 25KA (Ics=75%Icu) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Outgoing).

5 No's of 200A 4P, MCCB Adjustable thermal and fixed magnetic release of fault breaking capacity 25KA (Ics=75%Icu) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Outgoing).

1 No of 320A Onload Changeover.

METERING & INDICATION: (a). 2 No. of Dgital Multifunction Meter Three Phase Class 1.0 Elmeasure Make. (b).12 sets of Phase Indication lamps (R,Y,B) 22.5mm 220 Vac.including connection through PVC try, complete in all respects. (c). 10 No's of Digital Voltmeter, Ammeter. (d). CT 's and other panel accessories as required for measuring purposes.

Design, Fabrication, Assembling of Supply, Installation, Testing and Commissioning of LT Floor Power Panel (Type -I) from high quality 2mm wall thickness CRCA sheet angle/flat iron mounted with hinged lockable front double door for each meter compartment to accomadate with fixing arrangement of Multi function meter (MFM), MCCB, other switchgears with bus bar ways in separate compartments painted with powder coated conforming to CPWD specification IP-55 .The LT Distribution panel must be free standing with 600mm height from floor ,floor mounting and front execution type suitable for 415 V +/- 3% , 3 phase and neutral ,50 Hz system conforming I.E rules with necessary provision to connect cables of various sizes from the rear bottom side., 50 Hz, 4 wire power supply system.The assembly comprising of chassis ,famework, and fixed parts of metal casing of the switchgear shallbe provided with separte earthing. terminal.The formation must be compartmentalised in form 3b construction and must be supplied and installed. The Panel is comprising of the following items: (S.No. 2.01 - S.No. 2.07)

1 No. of 320A 4P, MCCB Adjustable Thermal & Adjustable magnetic release of fault breaking capacity 36KA (Ics=Icu=100%) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Incommer-I).

1 No. of 200A 4P, MCCB Adjustable Thermal & Adjustable magnetic release of fault breaking capacity 36KA (Ics=Icu=100%) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Incommer-II).

1 Set of 350 Amps 4P, 36kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and above Aluminium, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar.(Busbar-I)

1 Set of 250 Amps 4P, 36kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and above Aluminium, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar.(Busbar-II)

9 No's of 100A 4P, MCCB fixed thermal and fixed magnetic release of fault breaking capacity 16KA (Ics=75%Icu) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Outgoing).

5 No's of 63A 4P, MCCB fixed thermal and fixed magnetic release of fault breaking capacity 16KA (Ics=75%Icu) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Outgoing).

2 Sets of Dgital Multifunction Meter Three Phase Class 1.0 Elmeasure Make with CT's and Phase indication lamps (R,Y,B) 22.5mm 220Vac. 14 sets of Phase Indication Lamps including connection through PVC try, complete in all respects.

Design, Fabrication, Assembling of Supply, Installation, Testing and Commissioning of LT Floor Power Panel (Type -II) from high quality 2mm wall thickness CRCA sheet angle/flat iron mounted with hinged lockable front double door for each meter compartment to accomadate with fixing arrangement of Multi function meter (MFM), MCCB, other switchgears with bus bar ways in separate compartments painted with powder coated conforming to CPWD specification IP-55 .The LT Distribution panel must be free standing with 600mm height from floor,floor mounting and front execution type suitable for 415 V +/- 3% , 3 phase and neutral ,50 Hz system conforming I.E rules with necessary provision to connect cables of various sizes from the rear bottom side., 50 Hz, 4 wire power supply system.The assembly comprising of chassis ,famework, and fixed parts of metal casing of the switchgear shallbe provided with separte earthing. terminal.The formation must be compartmentalised in form 3b construction and must be supplied and installed. The Panel is comprising of the following items: (S.No. 3.01 - S.No. 3.07)

1 No. of 200/250A 4P, MCCB Adjustable Thermal & Adjustable magnetic release of fault breaking capacity 36KA (Ics=Icu=100%) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Incommer-I).

1 No. of 160/200A 4P, MCCB Adjustable Thermal & Adjustable magnetic release of fault breaking capacity 36KA (Ics=Icu=100%) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Incommer-II).

1 Set of 300 Amps 4P, 36kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and above Aluminium, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar.(Busbar-I)

1 Set of 250 Amps 4P, 36kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and above Aluminium, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar.(Busbar-II)

5 No's of 63-100A 4P, MCCB fixed thermal and fixed magnetic release of fault breaking capacity 16KA (Ics=75%Icu) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Outgoing).

5 No's of 40-63A 4P, MCCB fixed thermal and fixed magnetic release of fault breaking capacity 16KA (Ics=75%Icu) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Outgoing).

2 Sets of Dgital Multifunction Meter Three Phase Class 1.0 Elmeasure Make with CT's and Phase indication lamps (R,Y,B) 22.5mm 220Vac. 10 Sets of Phase Indication Lamps, including connection through PVC try, complete in all respects.

Design, Fabrication, Assembling of Supply, Installation, Testing and Commissioning of LT Floor Power Panel (Type -III) from high quality 2mm wall thickness CRCA sheet angle/flat iron mounted with hinged lockable front double door for each meter compartment to accomadate with fixing arrangement of Multi function meter (MFM), MCCB, other switchgears with bus bar ways in separate compartments painted with powder coated conforming to CPWD specification IP-55 .The LT Distribution panel must be free standing with 600mm height from floor ,floor mounting and front execution type suitable for 415 V +/- 3% , 3 phase and neutral ,50 Hz system conforming I.E rules with necessary provision to connect cables of various sizes from the rear bottom side., 50 Hz, 4 wire power supply system.The assembly comprising of chassis ,famework, and fixed parts of metal casing of the switchgear shallbe provided with separte earthing. terminal.The formation must be compartmentalised in form 3b construction and must be supplied and installed. The Panel is comprising of the following items: (S.No. 4.01 - S.No. 4.07)

1 No. of 200/250A 4P, MCCB Adjustable Thermal & Adjustable magnetic release of fault breaking capacity 36KA (Ics=Icu=100%) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Incommer-I).

1 No. of 160/200A 4P, MCCB Adjustable Thermal & Adjustable magnetic release of fault breaking capacity 36KA (Ics=Icu=100%) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Incommer-II).

1 Set of 300 Amps 4P, 36kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and above Aluminium, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar.(Busbar-I)

1 Set of 250 Amps 4P, 36kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and above Aluminium, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar.(Busbar-II)

6 No's of 63-100A 4P, MCCB fixed thermal and fixed magnetic release of fault breaking capacity 16KA (Ics=75%Icu) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Outgoing).

5 No's of 40-63A 4P, MCCB fixed thermal and fixed magnetic release of fault breaking capacity 16KA (Ics=75%Icu) with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (Outgoing).

2 Sets of Dgital Multifunction Meter Three Phase Class 1.0 Elmeasure Make with CT's and 11 Sets of Phase indication lamps (R,Y,B) 22.5mm 220Vac.

SITC of 100A 4 Way Busbar Box type including fixing, cutting the wall and making good the same including finishing the wall with wall puty and paint, etc as required (Complete in all respects including required sizes of copper thimbles for each circuit/submain with colour coded PVC seleeves and connecting the existing Submain/ Circuit Wiring with the Busbar .

Proviidng & laying of 4 core, 240 Sq.mm XPLE Insulated Armoured Aluminium Cable in DWC HDPE Pipe at a depth of 600mm including making end terminations on both side with heat shrinkable kits, complete in all respects.

Proviidng & laying of 4 core, 120 Sq.mm XPLE Insulated Armoured Aluminium Cable on surface /walls with MS Clamps including making 8 no's of end terminations on both side with heat shrinkable kits, complete in all respects.