Islamic University Of Science And Technology Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Islamic University Of Science And Technology - IUST Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date17 Apr 2023
Closing Date8 May 2023
Tender Amount₹ 1,85,00,000
Costs
EMD
₹ 3,70,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_IUST_209903_1Bid Award Id
ViewTender No
IUST/EW/ELE/TEND/ADMIN/23/03Tender Authority
Islamic University Of Science And Technology ViewPurchaser Address
-Website
http://https://www.iustlive.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group A
182
118118
649
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit as required. Note: All the circuits shall be terminated with the required sizes of copper bottle type thimbles with propoer crimping, complete in all respects.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire with 25mm Conduit.
4330
900640
208
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire with 25mm Conduit.
5808
1597200
275
... More
2 X 4 sq. mm +1 X 4 sq. mm earth wire with 25mm Conduit.
4805
1604870
334
... More
2 X 6 sq. mm +1 X 6 sq. mm earth wire with 25mm Conduit.
90
39510
439
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire with 25mm Conduit.
30
17100
570
... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire with 25mm Conduit.
223
119751
537
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire with 25mm/32mm Conduit.
506
381524
754
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire with 32mm Conduit.
89
89445
1005
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire with 32mm/40mm Conduit.
594
810810
1365
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
3 x 1.5 sq. mm
1624
154280
95
... More
3 x 2.5 sq. mm
1452
198924
137
... More
3 x 4 sq. mm
601
123806
206
... More
2x 6 sq. mm
189
40824
216
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
1Pair
269
8339
31
... More
2 Pair
1613
61294
38
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
150
7050
47
... More
Supplying and fixing of following sizes of medium class additional PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
20 mm (for RG6 Point)
150
19200
128
... More
Supplying and fixing of following sizes of medium class additional PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
100
12800
128
... More
25 mm
300
43500
145
... More
32 mm
150
27600
184
... More
40 mm
150
29700
198
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
-
-
-
... More
100 mm X 100 mm X 60 mm deep
11
2299
209
... More
150 mm X 150 mm X 60 mm deep
6
1866
311
... More
200 mm X 250 mm X 60 mm deep
10
4680
468
... More
250 mm X 300 mm X 60 mm deep
18
10926
607
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
50
2000
40
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
73
34821
477
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in Rooms).
295
199420
676
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 1 No of 3 pin 5/6 A modular Switch & Socket outlet and 1 No. of 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
107
97370
910
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
57
33402
586
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
125
46125
369
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
TV antenna socket outlet
10
1480
148
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mm X 75mm)
100
29800
298
... More
3 Module (100mmX75mm)
242
79134
327
... More
4 Module (125mmX75mm)
35
12005
343
... More
8 Module (125mmX125mm)
16
7264
454
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.
54
39258
727
... More
Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.
40
3960
99
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 A switch
60
6180
103
... More
15/16 A switch
45
7020
156
... More
3 pin 5/6 A socket outlet
87
10614
122
... More
6 pin 15/16 A socket outlet
45
8865
197
... More
Telephone socket outlet
50
7400
148
... More
Bell push
41
5740
140
... More
6 pin 32 A socket outlet
16
4480
280
... More
25A DP switch
16
3216
201
... More
RJ-45 (LAN Socket)
20
7600
380
... More
SUB-HEAD-II: DISTRIBUTION BOARDS
-
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way, Double door
2
5146
2573
... More
12 way, Double door
4
9260
2315
... More
16 way, Double door
1
3141
3141
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
-
-
-
... More
4 way (4 + 12), Double door
2
8182
4091
... More
6 way (4 + 18), Double door
22
109428
4974
... More
8 way (4 + 24), Double door
9
53703
5967
... More
Supplying and fixing 12 Way (4+36), horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
3
28422
9474
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 160 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCCBs and incomer) as required. (Note : Vertical type MCCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
12 way (MCCB + 36), Double door
3
51024
17008
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
578
147968
256
... More
Double pole
12
7872
656
... More
Triple pole and neutral
17
20876
1228
... More
Supplying and fixing 63 A TP rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
13
23075
1775
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
12
156
13
... More
Supplying and fixing following rating, double pole, 240 V, MCB(10kA) in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40A
6
7032
1172
... More
Supplying and fixing following rating, four pole, 415 V, MCB(10kA) in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40A
19
23503
1237
... More
63A
25
47450
1898
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25A
3
6084
2028
... More
40A
3
7926
2642
... More
63A
3
8166
2722
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 8 way, Double door SPN MCBDB
2
1664
832
... More
For 10 way, Double door SPN MCBDB
4
3240
810
... More
For 14 way, Double door SPN MCBDB
1
902
902
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 6 way, Double door TPN MCBDB
22
24728
1124
... More
For 8 way, Double door TPN MCBDB
9
12060
1340
... More
For 4 way, Double door TPN MCBDB
2
2160
1080
... More
Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
3
3510
1170
... More
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
10
16210
1621
... More
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
5
12950
2590
... More
Design, fabrication, assembling, wiring, supply, installation, testing & commissioning of (IP:30, IK 08) minimum 1.2mm thick sheet steel DP/TP/FP MCB/ Isolator enclosure conforming to IS: 8623-1 & 3 & IEC 61439- 1&3, made out of pre-treated and powder coated (minimum 60-80 micron), 240/415 V, mount on surface / recess, complete with din bar including earthing stud etc. as standard or as suggested by Architect/Consultant. (But without MCB/RCCB/Isolator).
15
10560
704
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
... More
200 A, 36kA, FP MCCB
2
30412
15206
... More
SUB-HEAD-III: LIGHTNING CONDUCTOR
-
-
-
... More
Supply, fixing, testing and commissioning of single spike air terminals of 10 mm dia.of 1Meter long as required and as per site conditions. the air terminal shall be manufactured with aluminium. The terminal shall be provided with the integrated / attached threaded base support suitable for mounting the terminals as per site condition. The base support shall be minimum 3 mm thick and shall have inbuilt connector fitting for connection of lightning conductor in such a way that conductor contact area shall not be less than 40mm on all side of the conductor as per IS/IEC 62305.
6
14250
2375
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
308
38808
126
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
176
34672
197
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc. as required.
162
18306
113
... More
Supply, fixing, testing and commissioning of Lightning counter indicating date and time of last record In-addition having to see previous history of surges etc complete as required to meet requirements to IS/IEC 62561-1 etc. complete as required
2
22652
11326
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
11
1331
121
... More
SUB-HEAD-IV: EARTHING SYSTEM
-
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
6
41130
6855
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required.
1
13838
13838
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
10
15510
1551
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
50
35300
706
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
100
24400
244
... More
Providing and fixing 32 mm X 6 mm G.I. strip on surface or in recess for connections etc. as required.
120
2184
18.2
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
250
17500
70
... More
Providing and fixing 32 mm X 6 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
120
4404
36.7
... More
SUB-HEAD-V: CABLE TRAY & RACEWAY
-
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
90
119250
1325
... More
300 mm width X 50 mm depth X 1.6 mm thickness
290
279270
963
... More
150 mm width X 50 mm depth X 1.6 mm thickness
33
23628
716
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
4
10732
2683
... More
300 mm width X 50 mm depth X 1.6 mm thickness
22
40744
1852
... More
150 mm width X 50 mm depth X 1.6 mm thickness
4
5080
1270
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
4
12564
3141
... More
300 mm width X 50 mm depth X 1.6 mm thickness
13
28028
2156
... More
150 mm width X 50 mm depth X 1.6 mm thickness
4
5532
1383
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
4
14884
3721
... More
300 mm width X 50 mm depth X 1.6 mm thickness
4
11292
2823
... More
SUB-HEAD-VI: L.T./ CONTROL CABLING SYSTEM
-
-
-
... More
Supply of following sizes of Power Cables multi stranded Aluminium conductor, XLPE Insulated, cores laid up PVC tape / Extruded Inner sheath , Armour, FRLS at outer sheath,1100V grade as per IS 7098(Part 1) 1988 with upto date amendments.
-
-
-
... More
4 x 10 sq.mm.
60
13140
219
... More
4 x 50 sq.mm.
45
25290
562
... More
4x 70 sq.mm.
45
33210
738
... More
4x 120 sq.mm.
70
67760
968
... More
4x 185 sq.mm.
80
135360
1692
... More
4x 400 sq.mm.
200
612400
3062
... More
Supply of following sizes of Power Cables multi stranded Copper conductor, XLPE Insulated, cores laid up PVC tape / Extruded Inner sheath , Armour, FRLS at outer sheath,1100V grade as per IS 7098(Part 1) 1988 with upto date amendments.
-
-
-
... More
4x 16 sq.mm.
50
57350
1147
... More
2x10 sq.mm. Cu Ar. XLPE cable
100
48900
489
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe, etc as required.
-
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
200
42600
213
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
100
4500
45
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
150
13800
92
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with
25/40x3mm MS flat clamp)
90
10350
115
... More
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
25
14625
585
... More
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
15
7620
508
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required
-
-
-
... More
4 X 50 sq. mm (35mm)
12
5016
418
... More
4 X 70 sq. mm (38mm)
12
6504
542
... More
4x 120 sq.mm. (45mm)
12
5088
424
... More
4x 185 sq. mm (57mm)
12
7164
597
... More
4x 400 sq. mm (82mm)
12
14340
1195
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.
-
-
-
... More
2C X 10 sq. mm (19mm)
4
2000
500
... More
4C X 16 sq. mm (28mm)
6
4680
780
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
63 mm dia (OD-63 mm & ID-51 mm nominal)
30
7410
247
... More
160 mm dia (OD-160 mm & ID-135 mm nominal)
205
98605
481
... More
SUB-HEAD-VII: LIGHTING & FAN FIXTURES
-
-
-
... More
Note:- The product shall supplied, must match the technical specifications. The technical data sheets shall be arranged before the material dispatch and got approved from engineer-in- charge.
-
-
-
... More
Supply of indoor type Recess/Surface mounted downlighter LED light fixture with total system wattage 18Watt, 6500 K CCT covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy =100 lm/W and minimum system lumens 1800.
64
85568
1337
... More
Supply of indoor type Recess 2 x 2 Panel downlighter LED light fixture with minimum system wattage 36 Watt, 5700 K -6500 K CCT covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy =120 lm/W and minimum system lumens 4320.
488
1954440
4005
... More
Supply of indoor type Recess/Surface mounted downlighter LED light fixture with total system wattage 15W, 6500K CCT covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy =100 lm/W and minimum system lumens 1500.
108
100170
927.5
... More
Supply of indoor type 25Watt Hanging decorative Architectural LED circular luminaire impresses with an effective height of 60-80 mm with 400mm dia and produces diffused planar and low-glare light. The annular shape should gives the luminaire a sturdy appearance marking entreating attraction. The fixture should have minimum efficacy =110 lm/W and minimum system lumens 2750.
3
39858
13286
... More
Supply of indoor type hanging light fixture with 20Watt LED light. The fixture should have a decorative jar with minimum efficacy =100 lm/W.
28
23520
840
... More
Supply of indoor type deorative light fixture 17 Watt LED Mirror light. The fixture should have minimum efficacy =100 lm/W.
23
38640
1680
... More
Providing & fixing of High power LED Outdoor Wall Light 2x12W, made out of Aluminium Body and Glass, 3000-5700K CCT with bean angle of 45 degree, and luminious flux of 1450-1600 LM, the fixture shall be as IP54, IP65 & IP66 ratings.
60
90720
1512
... More
Supply of Indoor type wall bracket heavy duty 15Watt LED lights for LIFTS. The fixture should have minimum efficacy =100 lm/W.
9
7128
792
... More
Supply, installation, testing, commissioning and numbering of indoor type 10W 608mm surface/wall mounted LED batten fitting covered by diffuser, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type.
10
3150
315
... More
Supply of indoor type Wall Bracket LED Linear fitting white CRCA powder coated with total system wattage 18-20W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy =100 lm/W and minimum system lumens 2000.
15
12390
826
... More
Supply of 50Watt, IP66 Outdoor type waterproof Flood LED fitting with minimum 100lum/watt of lux.
13
37960
2920
... More
Supply of 3W LED Unidirectional Entry/Exit Signage Light with inbuilt 2hours battery back up .
12
39480
3290
... More
Supply of 5 star rated 1200mm sweep ceiling fan, ISI marked, along with copper wound stator, blades, capacitor, downrod etc. but without regulator complete as required.
91
147420
1620
... More
Supply of 5 star rated 1400mm sweep ceiling fan, ISI marked, along with copper wound stator, blades, capacitor, downrod etc. but without regulator complete as required.
32
60192
1881
... More
Supply of 300mm-450mm dia sweep Metal body, 900±10% -1200±10% RPM Industrial Exhaust fan with guard and mounting arrangement.
4
6712
1678
... More
Supply of 150mm-200mm dia sweep,Windowl Exhaust fan with guard and mounting arrangement.
40
46000
1150
... More
Supply &Installation of 150/200mm dia sweep wall fan Hi speed with 3 speed push buttons, 1440 RPM, with guard and mounting arrangement.
6
12312
2052
... More
Supply & Installation of Electrical Bell.
40
31200
780
... More
Installation, testing and commissioning of LED Light fixtures (all types), outdoor LEDs, with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
833
171598
206
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
123
41697
339
... More
Installation of exhaust fan in the new openings, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm sweep
45
20250
450
... More
Numbering of ceiling fan/ exhaust fan/ lighting fixture fittings as required with required size of tags.
2
114
57
... More
Supplying and fixing extra down rod of 10 cm length G.I. pipe,15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
123
5658
46
... More
Providing & installation of 6-8Watt Aluminium Body Wall mounted flushed one way LED with beam angle of 44degree, IP54 rating, including connections, etc as required, complete in all respects.
36
38016
1056
... More
Providing & installation of profile LED including LED Strip of 5w/metre in Aluminium Base of size 12.5mm with the pvc caping, complete in all respects .
200
42000
210
... More
SUB-HEAD-VIII: M.V. POWER PANELS.
-
-
-
... More
Supplying, installation, testing and commissioning of following bolted fabricated in compartmentalized conform to IS: 8623/1993, Suitable for 415V, 3Phase, 4 Wire 50 Hz Ac supply, are housed in design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plate, bottom base channel of MS section not less than 100mmx 50mmx50mmx 5mm thick for Main L.T. Panel and capacitor panels and 40mmx25mmx25mmx 5mm thickplates for MDB/MCC and SDBs etc., The degree of protection of minimum IP:42 for indoor and IP:65 for outdoor use. i/c cleaning & finishing complete, having extensible type aluminium bus bars of high conductivity, SMC bus bar supports, with short circuit withstand capacity of 31MVA for 1 Sec., fabrication shall be done in transportable sections and all front and back doors shall be hinged type and earth with frame, Entire panel shall have a common aluminium earth bar of size 32mm x 6mm or as specified below at the rear with 2 Nos. earth stud each side, solid inter connections from main bus bar to switch gears upto cable alley, bus bars and control wiring with suitable size of ZHLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two half, i/c providing following switch gears :- The Bus bars will be Copper purity 99.9% / electrolytic grade E91 Aluminium duly sleeved with Helogen Free heat shrink coloured Insulated tube confirming to IEC 6068-3-247 Standard. Provide electrical insulating shrouds, reusable type covers for busbars Boots on corners Panels will be powder coating (60-80micron as per IS:13871 for indoor and 90-100 micron for outdoor), include one size higher terminal block in cable alley and interconnecting wires between bus bars and terminals via MCB. All Bus-Bar alley and relay compartments shall be provide fully automtic control thermotate with strip heater.
-
-
-
... More
EP-1 For ADMINSITRATION BLOCK (INDOOR MAIN PANEL-IP:42)
-
-
-
... More
1 Nos.630A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (INCOMER-I)
-
-
-
... More
1 Nos. 320A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (INCOMER-II)
-
-
-
... More
Metering, INDICATOR AND RELAYS
-
-
-
... More
Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW,VAr,VA, kVA, kVAR, kWH, kVAH, kVARH,MDI, Harmonics,Run Hours, RS-485 Port, LCD display with class-0.5 accuracy for all incomer feeder.
-
-
-
... More
E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer.
-
-
-
... More
Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB
-
-
-
... More
1 Set of 620 Amps 4P, 35kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar.(BUSBAR-I)
-
-
-
... More
1 Set of 315 Amps 4P, 35kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and, current density of bus-bars shall not be less than 0.8Amps/sq.mm for Aluminium and 1.6Amps/sq.mm for copper cross sectional area of Bus Bar.(BUSBAR-II)
-
-
-
... More
2 No Surge protection device Type 2 ( Class C), 4 Mode, MOV type suitable for 8/ 20µs surge,Voltage Protection level Up 1.8kV, Operating Temperature -40 deg 'c' - +80 deg 'C', Connected Between 3Nos. phase to neutral and 1Nos. neutral to earth with discharge Current Imax. ≥ 40KA Per mode & In ≥ 20kA per Mode. Make & Model: Argos-AG-230-40T2-E or eq. SPD with 63A 4P HRC fuses of 100kA breaking capacity. For connecting SPD minimum 10sqmm copper wire must be used & length of connecting leads shall not be more than 500mm for per mode connection with each busbar including all necessary accessories. The SPD shall complience with IEC 61643-11 and certified by TUV,CE,ROHS,UL94V-O. (SPD)
-
-
-
... More
4 Nos. 250A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (OUTGOING-I)
-
-
-
... More
1 Nos. 320A TP+NL ELCB/MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 36KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended (OUTGIONG-II)
-
-
-
... More
3 Nos. 125A 4P MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. (OUTGOING-III)
-
-
-
... More
1 No. of 320A, 415V, Automatic/Manual Changeover.
-
-
-
... More
Earth leakage protection relay with 30mA to 300mA with ZCT for each outgoing MCCB.
-
-
-
... More
OUTGOINGS (For Floor Panel)
-
-
-
... More
1 Nos. 250A 4P MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended Complete with Lock & sealing arrangement (INCOMER-I)
-
-
-
... More
1 Nos. 125A 4P MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. (INCOMER-II)
-
-
-
... More
1 set of 315Amps 4P, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars. All interconnections shall be with Aluminium Bus-bars, current density of bus-bars shall not be less than 1.3 Amps/sq.mm for Aluminium cross sectional area of Bus Bar Complete with Lock & sealing arrangement. (BUSBAR-I)
-
-
-
... More
1 set of 160Amps 4P, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars. All interconnections shall be with Aluminium Bus-bars, current density of bus-bars shall not be less than 1.3 Amps/sq.mm for Aluminium cross sectional area of Bus Bar Complete with Lock & sealing arrangement. (BUSBAR-II)
-
-
-
... More
2 Sets of R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer.(INDICATIONS)
-
-
-
... More
5 Nos. 63A 4P MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 36KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. (FLOOR OUTGOING-I)
-
-
-
... More
5 Nos. 40A 4P MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 36KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. (FLOOR OUTGOING-II)
-
-
-
... More
1 No 100A , 415V, Automatic/maual Changeover.
-
-
-
... More
1 Nos. 40A,2P, MCB, 10kA
-
-
-
... More
1Nos. 40A,TPN, MCB, 10kA
-
-
-
... More
1Nos. 63A,TPN, MCB, 10kA
-
-
-
... More
1 No. of Power Contactors: 40A, 4 Pole(415V) .
-
-
-
... More
1 No. of Contact Multiplier: 10A,NO/NC as required.
-
-
-
... More
1 No. of Astronomical Digital Time Switch 24 hr (DP)
-
-
-
... More
The contactors shall be controlled by a Digital Time Switch with adjustable time for switching "ON" and "OFF" the lamps throughout the year mounted inside the LT Panel.
-
-
-
... More
EP-1 for ADMIN BLOCK as described above as described above including CRCA coated Panel Body made out of 2mm thick powder coated sheets and Panel Mounting frame as per the approved desgin, complete in all respects. (From S.No. 102-102.30.)
1
808101
808101
... More
Floor Panel-1 (ADMINISTRATION BLOCK) (INDOOR FLOOR PANEL-IP:42)
-
-
-
... More
1 Nos. 250A 4P MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended Complete with Lock & sealing arrangement. (INCOMER-I)
-
-
-
... More
1 Nos. 125A 4P MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. (INCOMER-II)
-
-
-
... More
1 set of 315Amps 4P, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars. All interconnections shall be with Aluminium Bus-bars, current density of bus-bars shall not be less than 1.3 Amps/sq.mm for Aluminium cross sectional area of Bus Bar Complete with Lock & sealing arrangement. (BUSBAR-I)
-
-
-
... More
1 set of 160Amps 4P, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars. All interconnections shall be with Aluminium Bus-bars, current density of bus-bars shall not be less than 1.3 Amps/sq.mm for Aluminium cross sectional area of Bus Bar Complete with Lock & sealing arrangement. (BUSBAR-II)
-
-
-
... More
2 Sets of R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. (INDICATIONS)
-
-
-
... More
5 Nos. 63A 4P MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 36KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. (OUTGOING-I)
-
-
-
... More
5 Nos. 40A 4P MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 36KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. (OUTGOING-II)
-
-
-
... More
1 No 100A , 415V, Automatic/maual Changeover.
-
-
-
... More
1 Nos. 40A,2P, MCB, 10kA
-
-
-
... More
1Nos. 40A,TPN, MCB, 10kA
-
-
-
... More
1Nos. 63A,TPN, MCB, 10kA
-
-
-
... More
Floor Panel-1 (ADMINISTRATION BLOCK) as described above as described above including CRCA coated Panel Body made out of 2mm thick powder coated sheets and Panel Mounting frame as per the approved desgin, complete in all respects. (From S.No. 103-103.11.)
2
494268
247134
... More
SUB-HEAD-IX: SECTION - I STRUCTURED CABLING SYSTEM PASSIVE
-
-
-
... More
Supplying and fixing of following sizes of medium class additional PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (For Data Outlets)
-
-
-
... More
20 mm
2565
328320
128
... More
25 mm
5130
743850
145
... More
32 mm
75
13800
184
... More
40 mm
40
9120
228
... More
Supply, Installation, Testing & Commissioning of CAT 6A UTP Universal (both tool & toolless) information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have minimu 750 mating cycle and 200 insertion cycle and UL approved,for Data, Voice, & Wi-Fi at user end.
229
96409
421
... More
SUB-HEAD-X: IP CCTV CONDUITING SYSTEM
-
-
-
... More
Supplying and fixing of following sizes of medium class additional PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (For CCTV Camera)
-
-
-
... More
20 mm
756
96768
128
... More
25 mm
504
73080
145
... More
32 mm
100
18400
184
... More
Supply, Installation, Testing & Commissioning of CAT 6 UTP Universal (both tool & toolless) information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have minimu 750 mating cycle and 200 insertion cycle and UL approved,for Camera at user end.
28
10920
390
... More
SUB-HEAD-XII: UPS & VOLTAGE CONTROL SYSTEM
-
-
-
... More
Supply, installation, testing and commissioning of 15kVA, 3/1 Phase IN and 3/1 Phase OUT , 50 Hz, true online UPS along with Sealed Maintenance Free battery bank giving a back up of minimum60 MInutes at full load as per specification along with inbuilt over voltage protection and all accessories including interconnecting cables, lugs, Base Frames, Battery Rack & Battery Circuit breaker complete as required.
Note: Battery bank sizing calculations shall be submitted for approval along with shop drawings.
1
298000
298000
... More
Supplying, installation, testing and commissioning of Servo controlled voltage regulator(AVR) 150KVA 3 phase, 50 Hz ,440V Naturally oil cooled ,copper wound having Cable end boxes on input and out put sides With first filling of filtered dehydrated oil and confirming to IS 9815 Part I 1994 as per specification attached complete in all respects. And shall be provided with fittings,accessories,protection including alarm/trip protection Complete as per specifications as required.
A:Standard features AVR Rating:200KVA, 3-Phase. 1. Input voltage:90V Vph, 155V V line to line. 2. Output voltage variation: 440+/- 1%.V 3. To cutoff the output at high and low input voltages beyound the designated voltages with audio and visual alarm. 4.Overload protection by isolating the load in the stabilizer with audio and visual alarm. 5. Tripping arragement in case of any phase failure. 6.Auto/manual provision for restarting the stabilizer after tripping due to any reason. 7. Micro limit switches to cutoff the power supply to servo motor while it reaches the extreme low volatge and extreme high voltage points.
1
390000
390000
... More
Providing & installation of 200A Busbar with Enclosure, complete in all respects.
1
18078
18078.9
... More
Providing, Installation, testing & commissioning of 3phase, 125KVA, Diesel Generator with AMF Panel including control cabling as required on site and four number of Chemical Earthings, complete in all respects.
1
1152115
1152115.88
... More
SUB-HEAD-XIII: IP-PBX NETWORKING.
-
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.(IP-PBX and CCTV)
-
-
-
... More
1 run of cable
2135
121695
57
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements