Irrigation And Flood Control Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Irrigation And Flood Control Department - IFC Tender
Civil And Construction
Pipe Line Project
Water Storage And Supply
Eprocure
Opening Date5 Apr 2025
Closing Date17 Apr 2025
Tender Amount₹ 2,06,777.84
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Stage Contract For The Year 2025-26 Of Phe Sd Bagga
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_IFC_275300_1Bid Award Id
ViewTender No
ENIT NO. 01 of 2025-26 dt 05/04/2025Tender Authority
Irrigation And Flood Control Department ViewPurchaser Address
-Website
http://http://ifcjmu.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply of Masson a) 2nd class
1
734
734
... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge
1
313
313.2
... More
Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50mm thick with 20mm nominal size stone aggregate. crushed
1
562
562.15
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class deodar wood 35mm thick
1
4256
4256
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 150 mm dia D.I. Class K-7 pipes
1
1934
1934.7
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 100 mm dia.
1
94
94.8
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 200 mm dia.
1
221
221.9
... More
Dry stone pitching (any thickness) excluding cost of stones On Top copings of banks
1
673
673.8
... More
b) 50 mm dia
1
986
986.15
... More
Dismantling tile work in floors and roof laid in cement mortar including stacking material with in 50 Meteres lead For Thickness of tiles 10 mm to 25 mm
1
57
57
... More
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 M (stacks of cleaned bricks shall be measured) from brick work in cement mortar
1
4
4.95
... More
Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087
marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and relaminated conforming to IS: 12823, Grade-I, Type-II marked
1
3044
3044.25
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete Size of tile 600x600 mm
1
1448
1448.9
... More
Chequrred precast cement concrete tiles 22 mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and clearing etc. complete on 20 mm thick bed of cement mortar 1: 4 (1 cement: 4 coarse sand) excluding cost of tiles ordinary cement without any pigment
1
1292
1292.85
... More
Reinforcement of RCC
1
123
123.2
... More
Silt clearance from canals, inclusive of initial lead and lift (50 m and 1.5m respectively a) Wet
1
184
184.95
... More
65 mm dia.
1
745
745.1
... More
Dumping of stone (excluding cost of stone) in horizontal on level.
1
237
237.9
... More
20 mm dia.
1
22
22.25
... More
Dismantling GI pipes (External work) including excavation and refilling after taking out the pipes, manually/ by mechanical means including stacking of pipes with in 50 Mtrs lead 15mm to 40 mm dia nominal bore
1
109
109.65
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete in color such as white, ivory, grey, fume red brown
1
1107
1107.65
... More
Note :- (4) The material which is issued by the Department, the cost of material shall be deducted as per prevailing stock rates of this Division
-
-
-
... More
Silt clearance from canals, inclusive of initial lead and lift (50 m and 1.5m respectively a) Dry
1
111
111
... More
Fixing glazed/Ceramic/Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, in average 3mm Thickness
1
649
649.1
... More
80 mm dia ( M )
1
1151
1151.2
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 350 mm dia.
1
367
367.7
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 500 mm dia.
1
697
697.55
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 150 mm dia.
1
150
150.35
... More
50 mm dia.
1
532
532.8
... More
Loading unloading of material by way of engaging labour
1
553
553
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level 1:3:6 (1 cement: 3 coarse sand 6 Graded stone aggregate of 20 mm nominal size) (Crushed)
1
5733
5733.6
... More
Dismantling tile work in floors and roof laid in cement mortar including stacking material with in 50 Meteres lead For thickness of tiles above 25 mm and upto 40 mm.
1
89
89.95
... More
Painting with oil type wood preservative of approved brand and manufacture an old work (one or more coat)
1
41
41.9
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 600 mm dia D.I. Class K-7 pipes
1
7860
7860.8
... More
f) 20 mm dia
1
513
513.4
... More
Dismantling CI pipes including excavation and refilling trenches after taking out the pipes manually by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site with 50 Mtrs lead as per direction of Engineer incharge Upto 150 mm dia.
1
303
303.05
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 300 mm dia.
1
1192
1192.4
... More
Supply of Masson a) Ist Class
1
806
806
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 200 mm dia D.I. Class K-7 pipes
1
2222
2222
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 125 mm dia.
1
588
588.55
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood 35mm
1
4412
4412.45
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)
1
9821
9821.85
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 600 mm dia.
1
935
935.55
... More
Filling available excavated earth (excluding rock ) in trenches, plinth sides of foundation etc. Layers not exceeding 20 cm in depth, consolidating each deposited layers lead upto 50 M and lift upto 1.5 M
1
218
218.4
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 600 mm dia.
1
2568
2568.55
... More
20 mm dia.
1
227
227.9
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 200 mm dia.
1
791
791.95
... More
Dismantling CI pipes including excavation and refilling trenches after taking out the pipes manually by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site with 50 Mtrs lead as per direction of Engineer incharge Above 300 mm dia.
1
525
525.6
... More
Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth upto 30 cm measured at height of 1 M above ground level and removal of rubbish upto 1 distance of 50 m outside the periphery of the area cleared
1
12
12.49
... More
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, and cleaning, refilling the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
1
473
473.75
... More
Providing and fixing of gun metal gate valve: a) 65 mm dia
1
1646
1646.05
... More
Dismantling manually /Mechanically including stacking of serviceable material and disposal of unserviceable material within 50 Meter lead Water Bound macadam road
1
156
156.3
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 250 mm dia D.I. Class K-7 pipes
1
2514
2514.45
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 500 mm dia.
1
1896
1896.75
... More
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge 18 mm thick Italian Marble stone slab, Perlato, Rossoverona, Fire Red or Dark Emperadore etc
1
7695
7695.15
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately). For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
1
616
616
... More
65 mm dia.
1
80
80.3
... More
Renewing glass planes with putty and nail wherever necessary incl. taking out old putty float glass panes of thickness 4.0 mm
1
991
991
... More
Providing and fixing of GI pipes complete with G.I fittings excluding tenching and refilling etc. ( external work) 15 mm dia
1
179
179.2
... More
Dry stone pitching 225 mm thickness including cost of stone and preparation of surface “Nallah”.
1
335
335.6
... More
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Upto 5mm depth and 5mm width
1
97
97.15
... More
e) 25 mm dia
1
691
691.7
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)
1
9395
9395.7
... More
Half Brick masonry with bricks of class designation 75 in foundation and plinth in Cement Mortar 1:4 (1 cement : 4 coarse sand)
1
947
947.25
... More
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm diameter 50mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of framework by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete 75mm overall thickness partitions with 12.5 thick double skin fire rated Glass Reinforced Gypsum (GRG), plaster board confirming to IS : 2095 (Part 3) 1996 (Board with BIS Certification marks)
1
1893
1893.55
... More
Dry stone pitching (any thickness) excluding cost of stones On Horizontal
1
535
535.55
... More
25 mm dia
1
311
311.95
... More
supply of boulders (nallah) nominal size 225 mm (stack measurement reduced by 15%)
1
700
700
... More
Hand packing stone in wire crate excluding cost of crates and stones
1
371
371.15
... More
Demolishing Brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead In cement mortar
1
1458
1458.45
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 500 mm dia D.I. Class K-7 pipes
1
6107
6107.95
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like
1
167
167.8
... More
Hand packing stones in wire-crates, excluding cost of crates and stones
1
371
371.15
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineering-plate etc. complete as per the direction of Engineer-in-charge With Stainless Steel cover plate minimum 1.25 mm thickness
1
2407
2407.05
... More
Slip clearance in soils; mixed with moorum/ kankar/ shingle/ boulders,
disposal lead upto 50 M and lift upto 1.5 M
1
331
331.15
... More
Dismantling GI pipes (External work) including excavation and refilling after taking out the pipes, manually/ by mechanical means including stacking of pipes with in 50 Mtrs lead Above 40 mm nominal bore.
1
121
121.65
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Second Class deodar wood
1
2964
2964.85
... More
100 mm dia ( M)
1
118
118.45
... More
Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc ( not exceeding 1.5 M in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan ,depth upto 1.5 Mt including disposal of excavated earth upto 1 Mtr from cutting edges, disposed earth to be levelled and neatly dressed in . All kinds of soil.
1
479
479.3
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 400 mm dia.
1
564
564.2
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge Size of tile 600x600 mm
1
253
253.7
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 250 mm dia
1
990
990
... More
Note :- (2) Any item either not advertised or not provided in SSR 2020 shall be paid as per actual lowest market rates.
-
-
-
... More
Laying and fitting of GI pipes complete excluding cost of pipes and earth work 15 mm dia
1
22
22.25
... More
80 mm dia ( M )
1
80
80.3
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material in with 50 mtrs lead in 1:4:8 or richer mix
1
1064
1064.55
... More
32 mm dia.
1
37
37.7
... More
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 coarse sand)
1
441
441.4
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) Crusher
1
7275
7275.25
... More
Dry stone pitching (any thickness) excluding cost of stones On Slopes
1
693
693.95
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 150 mm dia.
1
595
595.95
... More
32 mm dia.
1
384
384
... More
Opening of old wire crates and rebinding after filling
1
35
35.6
... More
d) 32 mm dia
1
750
750
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 350 mm dia. D.I. Class K-7 pipes
1
373
373.8
... More
100 mm dia ( L)
1
118
118.45
... More
150 mm dia (M)
1
2256
2256.9
... More
38mm thick wood block flooring of first class teak wood laid over 25mm thick leveling layer of cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 10mm nominal size) to be paid separately coated, with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth, planed, levelled smooth and finished complete
1
11999
11999.65
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 1.60 mm thick with zinc coating not less than 350 gram/m2
1
1908
1908.75
... More
Supply of Fitter ( 1st class)
1
806
806
... More
Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade
1
52
52.95
... More
150 mm dia ( L)
1
118
118.45
... More
100 mm dia ( M)
1
1434
1434
... More
Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminum primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminum (with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminum frame work shall be paid Separately)
1
917
917.55
... More
40 mm dia.
1
434
434.65
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 100 mm dia D.I. Class K-7 pipes
1
1379
1379.55
... More
Engagement of sweeper
1
553
553
... More
Brick work with common burnt clay FPS (non-modualar) bricks of class designation 75 in foundation and plinth in Cement Mortar 1:4 (1 cement : 4 coarse sand)
1
7877
7877.4
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 400 mm dia.
1
1599
1599.1
... More
150 mm dia ( M)
1
118
118.45
... More
Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 50 to 80mm nominal bore
1
1387
1387.25
... More
Demolishing dry brick pitching in floors,drains etc. including stacking
serviceable material and disposal of unserviceable material with in 50 meters lead
1
934
934
... More
Painting top of roofs with bitumen of approved quality at 17 kg per 10sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10
1
191
191.9
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 100 mm dia.
1
398
398
... More
Grouting of stone pitching using M-10 nominal mix concrete (max size of aggregate 20 mm nominal) @ 3.65 cum per 100 sqm on horizontal/ side slopes,complete including curing (Nallah)
1
199
199.3
... More
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead 450 mm dia.
1
1793
1793.45
... More
c) 40 mm dia
1
834
834.6
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 300 mm dia D.I. Class K-7 pipes
1
3141
3141.1
... More
Locating/ Tracing of blockages/ leakages including excavation of pits.
1
553
553
... More
Providing and laying cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate ) All works upto plinth level
1
6591
6591.25
... More
Whitewashing one or more coat on old work
1
17
17.75
... More
100 mm dia ( L)
1
1255
1255.15
... More
Providing and laying in position cement concrete excluding the cost of centering, shuttering, finishing all work upto plinth level (1: 4: 8) 1. Cement: 4 coarse sand 8 Graded stone aggregate 40mm nominal size) crushed.
1
5202
5202.9
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 300 mm dia.
1
346
346.2
... More
Dismantling manually /Mechanically including stacking of serviceable material and disposal of unserviceable material within 50 Meter lead Bituminous road
1
305
305.95
... More
80 mm dia ( L )
1
80
80.3
... More
50 mm dia.
1
44
44.85
... More
Laying in position S & S or flanged CI special such as Tees bends, collars, tappers and caps etc (excluding cost of specials).
1
511
511.55
... More
Brick work with common burnt clay FPS (non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1: 6 (1 cement: 6 coarse sand)
1
7571
7571.55
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 450 mm dia D.I. Class K-7 pipes
1
5400
5400
... More
Earth work in excavation by Mechanical means (Hydraulic excavator) in foundations drains, pipes and cables etc (not exceeding 1.5 M in width or 10 sqm on plan ) trenches including dressing of sides and ramming of bottoms lift
1
256
256.85
... More
80 mm dia ( L )
1
878
878.25
... More
25 mm dia
1
37
37.7
... More
Note :- (1) If any item/ items not advertised in the above rate list but found necessary to be executed at site. The same shall be paid as per SSR 2020 on Contractors Appreciation / Depreciation.
-
-
-
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 250 mm dia.
1
270
270.65
... More
Clearance of GSR/ST/Dug well/OHT/Intake Tank by way of deploying labour and disposal of rubbish as per direction of Engineer-in- charge
1
553
553
... More
Note :- (3) Any other dia of pipes/ pipe specials if required shall be issued by the department as per prevailing stock rates of the division.
-
-
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material in with 50 mtrs lead in 1: 3: 6 or richer mix.
1
1725
1725.2
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class deodar wood 35mm thick
1
3665
3665.8
... More
Providing Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket 450 mm dia.
1
653
653.1
... More
Providing and fixing 12mm thick pre-laminated particle board flat pressed three layer or graded wood particle board (conforming to IS:12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides
1
933
933.35
... More
6 mm plaster on cement concrete or RCC work with whoite cement based polymer mofified self curing mortar of approved make as per directions of Engineer-In- Charge
1
214
214.9
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineering-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
1
1201
1201.8
... More
Repair of gate by way of weldiing and other material required
1
141
141.4
... More
Laying S & S centrifugally cast (Spun) Ductile Iron/ MS Pipe 400 mm dia D.I. Class K-7 pipes
1
4454
4454.45
... More
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with Udaipur green marble
1
2023
2023.6
... More
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm
1
1308
1308.35
... More
Dry brick on edge flooring with bricks of class designation 75 on a bed of 12mm cement mortar including filling joints with fine sand (1:4mix) ( with F.P.S bricks)
1
868
868.5
... More
Supply of Labour (Mazdoor)
1
553
553
... More
Dismantling CI pipes including excavation and refilling trenches after taking out the pipes manually by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site with 50 Mtrs lead as per direction of Engineer incharge Above 150 mm to 300 mm dia.
1
402
402.1
... More
Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40mm nominal bore
1
730
730.25
... More
Supply of Assistant Fitter ( 2nd class)
1
734
734
... More
Repair to plaster thickness 12mm to 20 mm in patches of area 2.5 sqm incl. cutting patches in proper shape and plastering wall surface with white cement polymer self curing incl. disposal of rubbish. All complete
1
532
532.75
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements