Irrigation And Flood Control Department Tender

Fabrication \installation\commissioning of gates including all carriage upto site of work as per specifecation. A) The shutters shall be fabricated with ISMC 125 frame with supporting members & 8mm plate on one side. B) Winch rod of 50-55 mm dia .(double square threaded of requirad length with sleeve of appropriate dia. c) Single heavy duty ,thrust bearing 3 MT capacity winch machine (worm gear and lock type)with brass gun metal bush nut of appropriate dia of standard quality and brand including supported with ISMC 150 mm channels. d) 150mm rubber seal -PVC IST quality. e) Casing to winch rod and machine. f) The whole srructure shall rest on superstructure supported by ISMC 150mm channels. g) two coats of synthetic paint (water resistant epoxy paint) over a coat of red oxide primer. h) All accessories as required .including nuts and bolts , flats etc. i) All carriages of all items including fabrication at site complete job as per direction of engineer in charge.

Steel work welded in built up sections \ framed work , including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel etc as required . In stringers treads, landing etc of stair case,including use of chequered plate wherever required, all complete