Irrigation And Flood Control Department Tender

Supply/ installation/ testing and commissioning of Heavy Duty, 25mm capacity, pillar Type Drilling Machine. The specifications of the machine shall be as under: Type: Pillar type Drilling Machine 25mm, Manual Feed, geared, with fine feed, complete with drive motor, pulleys & v-belts etc. • Drilling Capacity in Mild Steel 25mm • Spindle Nose Taper , MT3 or MT4 • Spindle Speed Range, rpm Min 70, Max 2800 • Spindle Travel, mm Min 140 • No. of speeds 8 • Distance Spindle to Column , mm Min 225 • Column Diameter, mm Min 88 • Column/ Pillar Length, mm Min 1200 • Distance Spindle to Table , mm Min 600 • Max. Distance Spindle to Base, mm Not less than 1000 • Table size, dia / mm x mm Min Dia 330 or Min 330 x 330 • Table Travel, mm Min 415 • Motor Min 1HP, 3Phase,(1400-1440)RPM • Overall Base size mm x mm • Overall Weight, Kg Approximately 200 to 400 • Accessories included: All standard accessories including but not limited to Machine Suitable 1. Drill Chuck with Key and Arbor 2. Coolant Pump 3. Machine Lamp 4. Machine Vice 5. DOL Starter 6. R/F switch 7. Drill-bit angle gauge 8. Manual Book Installation at site, complete in all respects including providing and fitting of wires/ cables / switches etc as required.