Irrigation And Flood Control Department Tender

Repair/servicing to 3 Nos. 5HP/0.75 cusec diesel engine driven dewatering Pump sets (no 1, 3, 4) by way of decoupling pump from engine, dismantling the engine parts like head, valves, rocker assemblies, fuel pumps etc. Removing/cleaning of carbon deposits with recommended chemicals. Repairs by way of replacement of ring sets, head gasket, inlet and exhaust valves & guides and grinding them up to optimum finished level as per requirement. Adjustment to rocker and tappet assembly. Job also includes complete repairs and calibration of fuel pump by dismantling and then P/f of injector nozzles, plungers, springs, delivery valve, lock sets etc. Calibrating the pump on calibration bench Draining of existing contaminated M-oil, cleaning the oil sump and then P/Filling of 3.5 ltr M-Oil for each engine. Idle testing the engine. Job further includes repairs to 02 nos 0.75 Cusec Pump units (1 and 3) by way of complete dismantling of pump by extracting the shaft, bearings, and impeller. P/F of bush by way of grinding and finishing upto proper size. Reassembling the pump by P/F of new gasket, nuts bolts, gland packing & greasing the bearing properly. Refitting the repaired pumps and coupling with respective engine by p/f of new flexible coupling along with nuts & bolts. The job involves providing and fitting of reinforced flexible suction pipe 25 feet long of 3inch dia and canvas flexible delivery pipe 50 feet long- 3inch dia., 3inch dia foot valves, nipples to pumping unit no.1. Complete Job includes cost of material, labour & fitment charges at ware house D/W station Jammu. Inclusive of all taxes.

Repair to 2 Nos. 5HP/0.6 cusec diesel engine driven dewatering Mud Pump sets (no 18 & 19) by way of decoupling pump from engine, dismantling the engine parts like head, valves, rocker assemblies, fuel pumps etc. Removing/cleaning of carbon deposits with recommended chemicals. Repairs by way of replacement of ring sets, head gasket, inlet and exhaust valves & guides and grinding them upto optimum finished level as per requirement. Adjustment to rocker and tappet assembly. Job also includes complete repairs and calibration of fuel pump by dismantling and then P/f of injector nozzles, plungers, springs, delivery valve, lock sets etc. Calibrating the pump on calibration bench. P/f of fuel filter, air filter, fuel pipes with banjo bolts. Draining of existing contaminated M-oil, cleaning the oil sump and then P/Filling of 3.5 ltr M-Oil for each engine. Idle testing the engine. Job further includes repairs to 02 nos 0.6 Cusec Pump units (18 & 19) by way of complete dismantling of pump by extracting the shafts, bearings, and impeller. P/F of bush by way of grinding and finishing upto proper size to pump no.18. Providing fitting of 1no bearing to pumping unit no.19. Reassembling the pumps by P/F of new gasket, nuts bolts, gland packing & greasing the bearing properly. Refitting the repaired pumps and coupling with respective engine by p/f of new flexible coupling along with nuts & bolts. Complete Job includes cost of material, labour & fitment charges at ware house D/W station Jammu. Inclusive of all taxes.

Repair to 02 nos 8HP Engines of Diesel driven Dewatering Pump sets (no.14 and 17) by way of dismantling engine at work shop and extracting out parts like head, Piston-liner assembly, valves, rocker assemblies, fuel pumps etc. Removing/cleaning of carbon deposits with recommended chemicals. Repair to head by way of replacement of ring sets, head gasket, inlet and exhaust valves & guides and grinding them. Adjustment to rocker assembly and tappets. Job also includes complete repairs and calibration of fuel pump by dismantling and then P/f of injector nozzles, plungers, springs, delivery valve, lock sets etc. Calibrating the fuel pump on calibration bench and fitting with engine. P/f of fuel filter, air filter, fuel pipes with banjo bolts. Providing and filling of fresh M.oil after draining out the old contaminated M.oil and cleaning of oil sump. Testing the engine idle. Complete job include cost of material, labour and fuel charges for idle running of engine at ware house D/W station. Job further includes repair to 01 nos 1.0 Cusec Pump unit of 8HP Diesel driven dewatering Pumps (pump no.17) by way of decoupling it from the engine and then complete dismantling of pump by extracting the shaft, bearings, and impeller. P/F of bearings-2nos. Fab. & P/F of gland bush-1no., gland packet-1set, cotter-1nos. Reassembling the pump by P/F of new gasket, nuts bolts, gland packing & greasing the bearings properly. Refitting the repaired pump and coupling it with engine by p/f of new flexible coupling along with nuts & bolts. Complete Job includes cost of material, labour & carriage charges. Inclusive of all taxes.