Irrigation And Flood Control Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Irrigation And Flood Control Department - IFC Tender
Civil And Construction
Excavation
Eprocure
Opening Date19 Dec 2024
Closing Date2 Jan 2025
Tender Amount₹ 1,06,99,700
Costs
EMD
₹ 2,14,000Document Cost
₹ 1,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IFC_268480_1Bid Award Id
ViewTender No
e-NIT No.14 of 2024-25Tender Authority
Irrigation And Flood Control Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
ELECTRIFICATION OF PUMP HOUSE (Part D) Electrification of pump house and premises by way of Providing and fixing of below mentioned items of reputed make including all requirements, controls,Conduits ,wiring,channels, MCB`s etc.
(a) Providing and fixing of 30 Watt LED Flood Lights inside pump house on 4 walls.-----(04 No)
(b) Providing and fixing of 30 Watt LED Flood Lightson suction side mounted on wall.----(02 No)
(c) Providing and fixing of 30 Watt LED Flood Lights in side premises mounted on wall..---(04 No)
(d) Providing and fixing of 12 Watt LED lamps inside operator/wash room.----(04 No)
(e) Providing of Heating points with all accessories.---(02 Point)
(f) Wire for connecting flood lights.----(04 sq.mm)
(g) 2 core-16 mm sq. Armoured Aluminium XLPES cable including suitable size & rating of thimbles to be drawn from electric transformer sub-station/main panel board to sub-main panel board or as per requirement.
(i)Providing installation of 900 VA Inverter with battery (150 AH) of reputed make along with all mounting and accessories( wheel mounted Trolley) .The job comprises of inverter fitting of 8 lighting points and 02 charging points along with all fittings and accessories.
1
55000
55000
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.( 25mm thick with 12.5 mm nominal size stone aggregate).
25
409
10231.25
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
68.95
218
15058.68
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. (First Class deodar wood). First Class deodar wood
6.74
3612
24348.25
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
500
167
83900
... More
Providing and fixing of heating points in 7/22 PVC insulated, copped wire complete with necessary conduits/ PVC channels and fittings including 16A SS combine fitted on a suitable wooden frame. including the cost of all labor, material, tools and plants, cartage, conveyance and any other item that may be required for the completeness of work in all respect as per specification and standard, drawing and as directed by the Engineer In-charge .(as pe LMR)
6
4000
24000
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First Class deodar wood.
8.31
4463
37091.69
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete.
10
747
7471
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge- (15 mm nominal dia)
1
6805
6805.8
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.(White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests).
1
5493
5493.25
... More
Design, manufacture, supply, erection, testing and commissioning of 2-ton capacity overhead monorail travelling crane for handling of electro-mechanical equipment at Dewatering Station Damhal Kakapora with following specifications.
Basic Crane Requirement.
Capacity: 2 Ton
Length of runway: As per pump house(Approximately 6.00 metres)
Length of bridge girder: As per pup house(Approximately 5.00 metres)
Bridge Girder:
Bridge girder 6.00 Meters long fabricated out of ISMB 300 section is to be fitted with two No. end carriages fabricated out of ISMC 150 section and other suitable MS members. Each end carriage is fitted with two No. MS wheels of suitable size mounted on suitable ball bearings. The two end carriages are coupled with each other by way of MS shaft and suitable gear reduction mechanism. The shaft is supported on Plummer blocks held by MS brackets. These brackets are to be welded to the bridge girder. A pulley fitted with the shaft is provided with an endless chain of 6 Meters to facilitate the movement of end carriage along with bridge girder.
Runway Girder:
Runway girder (2 Nos.) 6.00 meters long fabricated out of ISMB 200 with 25 mm M.S square bar welded on upper flange for movement of drive / driven wheels. The square bar is aligned perfectly and finished smoothly by machining.
Two No. of ISMC 150 braces are provided for connecting end columns of each row with the shed.
Monorail:
One unit 2-Ton capacity heavy duty monorail, suitable to operate through endless chain of 6 meters is mounted on lower flange of bridge girder to facilitate travelling movement of hoist load. The movement in longitudinal and transverse direction is limited by way of providing and fitting 4 No. suitable MS end stoppers of adequate strength to absorb the impact of moving monorail (with load).
Hoist/ Chain Pulley Block:
2 Ton 6m lift capacity chain pulley block(02 Numbers) of spur gear type mounted on monorail travelling trolley and operated from floor through an endless chain of make Pull Lift/ Globe/ Indef M/Equivalent make.
The whole structure shall be painted by anticorrosive metal primer and two coates of yellow paint after installation.
1
190000
190000
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2
63.52
852
54150.8
... More
Providing and paying Reinforcement, FE 500 Thermo-Mechanically Treated bars for all type and shape of R.C.C work including straightening, cutting, bending, placing in position, including dewatering if required including the cost of binding wires, labors, all type of material, tools and plant, cartage, conveyance, and any other item that may be required for the completeness of work in all respect as per specification and standards, drawings and as directed by the Engineer In-charge.Column R/F,Beam R/F,Foundation R/F, Slab R/F,plinth beam & Foundation block etc
5582
123
687702.4
... More
P/F of Water heating geyser of reputed brand with complete fittings and installation.(50 ltrs)
1
17000
17000
... More
Civil ( Part A)
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth & dewatering, with lead and lift including the cost of all labor tools and plant, staking of surplus earth at the site, cartage, conveyance and any other item that may be required for the completeness of the works in all respect as per the specifications and standards, drawings and as directed by the Engineer In-charge
162.74
592
96488.55
... More
Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
1
23815
23815.8
... More
Providing and laying centering and shuttering for all type of work, depth and shape including strutting, propping etc. and removal of form, including the cost of all material, labor, tools and plant, cartage, conveyance and any other item that may be required for the completeness of work in all respect, as per the specification and standards, drawings and as directed by the Engineer In-charge - Suspended Floors, Slabs etc.
217.48
718
156194.14
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete (100×58×1.9 mm)
30
41
1239
... More
Mechanical (Part- B) Design, Manufacture, Supply, Installation, Testing & Commissioning of horizontal Submerged Pump set for Dewatering Station DamhalKakapora. The pumset shall have following specifications:
PUMP:-
Discharge = 10.00 Cusec
Dynamic Head = 10 Mtr.
Type of pump = Horizontal Submerged Mixed Flow MATERIAL OF CONSTRUCTION:
Impeller = CF8M
Impeller Nut = Stainless Steel ASTM 351/CF-8M
Casing lines/Wearing Ring= CF8M
Impeller Shaft = Stainless Steel AISI 410
MOTOR:-
Type = Three phase, squirrel Cage, Electric Induction Motor Rating = Suitable Speed = (Synchronized). Operating Voltage = 415+ 10 % Volt Frequency = 50 + 3% Hz Class of insulation = F Type of Duty = Continuous Ingress protection IP 68 Efficiency class = IE2
The pumping unit shall be complete with Mild Steel Base Frame, requisite number of Foundation Bolts, and Pump - Motor coupling.
The pumpset shall be provided and fitted includes with following accessories:
Cable with LT PMU,. Extra cable required at site. MoC: 1 Run, MoC: SS 410)
Lifting Chain- MoC: Alloy Steel-W/O GI-Lifting Chain with “Oval” Ring @ 2 m & with D/Bow Shackle @ 1 End.
Third party inspection certificate from CEIL/RITES/equivalent shall be enclosed with at the time of delivery. 3rd party inspection charges are included in the cost.
2
1300000
2600000
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.(250x10 mm)
20
108
2175
... More
Fabrication of rectangular transformer bed 5x6 feet fabricated out of ISMC 75 .The structure shall provided with internal support of same material/channel at a distance of 300mm from each other and shall be provided with centrally supports by ISA 50x6 mm with four supports as per drawing. Also the job includes providing of vertical Supports (02 No) fabricated out of 150 mm 6 mm thick MS Pipe of length 10 feet out of which 6 feet shall be grouted in CC blocks of (1:2:4) mix and two number supports of the bed shall be taken as two number existing HT poles. The job also includes painting of the structure in silver color over priming coat
1
30000
30000
... More
Providing and laying in position cement concrete of M10 grade with 40 mm downgraded stone aggregate for all type of works up-to plinth level, including the cost of dewatering if required, labor, material, tools and plant, cartage, conveyance and any other item that may be required for the completeness of work in all respect as per the specification and standards, drawings, and as directed by the Engineer In-charge
3.14
5673
17814.48
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (Two coats ) .
121.05
109
13303.4
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
20.22
1455
29433.24
... More
Structural steel work in built up sections, trusses and framed work,
including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Welded)
542.15
138
74925.13
... More
Earthling to electrical Equipments :
Providing and Laying of Dual chemical earthing to the below mentioned equipments by way of Drilling of Bores (2No) for housing 7'x40mm thick Chemical Earthing rods preceded by filling the bore with the chemical for conductivity.The job involvesproviding and fixing of GI strip which shall be of size 25x6mm laid from the connecting points on the electrical equipment upto a common point and then further to earthing rods. All the electrical equipment shall be connected to the main strip by means of proper bolting arrangements. The quantity of strip required for the station shall be as per site requirement.The equipment which shall be earthed at site are given as under: - LT panel = 1 No.
100 HP FASD starters = 1 Nos.
100 KVA capacity copper wound voltage stabilizer = 1 Nos.
75 HP motors = 2 Nos.
1
10000
10000
... More
Providing, laying, stringing and binding of conductor ACSR 0.05
0.3
52000
15600
... More
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth
50
379
18952.5
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (20 mm nominal bore)
2
513
1026.8
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required-Kitchen sink without drain board(610x510mm bowl depth 200mm)
1
4380
4380.5
... More
Bricks at an average lead of 5 km
9.6
535
5138.88
... More
4 mm thick glass pane (weighing not less than 10 kg/sqm)
11.24
1985
22320.95
... More
Providing and fixing plain bend of required degree: 100 mm dia.
10
489
4894
... More
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
27.51
64
1777.15
... More
11 KVA SUBSTATION (Part E) Providing, Installation, Testing and Commissioning of oil immersed naturally air cooled (TYPE ONAN) , Outdoor type, three phase, 50 Hz , 11KV/440V-250V step down distribution transformer Aluminum Wound of 250 KVA Level-2 capacity confirming to IS-1180 at Dewatering Station Damhal Kakapora , The transformer shall be provided with all necessary accessories like Breather, Horn gap, Lifting Lug, And suitable name plate duly embossed/Engraved, tap changer.
The H.T transformer shall be manufactured /supplied incompliance with latest relevant IEC/IEEE/IS Standards. The technical specifications of the H. T. Transformer shall be as under.
Standard :IS-1180 (Part-1) : 2014
Type : Outdoor, Oil Cooled, 3 Phase &
Neutral
Energy Efficiency Level : 2
KVA Rating : 250 KVA
Rated Voltage H.V. : 11000 Volts L.V : 415 +-10%Volt.
Frequency : 50 HZ
Type of cooling : Naturally air cooled
Primary Winding Conductor : DPC Aluminum.
Secondary Winding Conductor : DPC Aluminum. The job includes providing and fitting of 3 pole 630 Amp. MCCB of breaking capacity of 50 KA with suitable no of Lugs of required Size and 185 sq.mm single core Aluminum cable of length 10 meters and testing of the equipments on full load.
1
390000
390000
... More
P/F of 8’ long ISMC 75 channels with nuts and bolts for fitment of link set, D/O set & lightening arrestor set etc. The job also includes painting of poles in silver colour over priming coat( for GO switch, D O set and for LA set)
1
20000
20000
... More
Providing and fixing bolts including nuts and washers complete.
150
131
19680
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills,
fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
108
7564
816998.4
... More
Slabs.
10.77
9821
105781.33
... More
Providing, Supply, Laying and Fitting of XLPE insulated 1.1KV 1-core 185 sqmm armoured Almuinum cable(220 Meters) covered with suitable PVC/ rubber sleeves for cabling of electrical equipment and common main Service line. The job includes crimping of the terminal ends of the conductor with hydraulic tool and providing and fitting of required no. and size of copper lugs. The conductor shall be of reputed make preferably Grand lays/ Havells/ Polycab/ equivalent and shall be as per 7098
1
200000
200000
... More
Providing and fixing bolts including nuts and washers complete.
12
131
1574.4
... More
Fabrication, providing, installation and testing of 400 mm Nominal Diameter 6.3 mm thick mild steel pipes for delivery piping of 02 no. pumps at the end as per the following technical specifications:
S.No Details Requirement
1 Nominal Diameter = 400 mm
2 Thickness = 6.3 mm
3 Length of the pipe = 7 meters.
4 Type of welding = ERW
5 Quality of MS plate to be used for manufacture = As per IS 2062
The delivery pipes shall be fitted with M.S flanges 16 fittings and end connections andpainting in one coat of steel primer followed by 02 coats of bituminous paint
2
60000
120000
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete-(Size of tile 500x500) mm
8.38
1366
11452.11
... More
Soling stone at an average lead of 7 km
24.07
272
6569.91
... More
P/F of 9 KV, 10 KA lightening arrestor set ( Station type )
1
6000
6000
... More
Stone aggregates at an average lead of 4 km (20 mm)
83.13
183
15261.01
... More
Supply installation testing and commissioning of Reflux valve 400mm dia. ISI marked PN 1.6 generally conforming to manufacturing as per IS-5312 Part-1 of 2004 with latest amendments and flange connections as per IS 1538/BIS 4504.
The job includes fabrication of By-pass arrangement for 400 mm dia. NRVby way of: Cutting of holes at two specified spots on the delivery pipe , providing and welding of 50mm NB GI/ MS black pipeheavy class to the delivery pipe including one side flanged bends with matching flanges 4 No, ball valves -01 No. 50 mm size
2
200000
400000
... More
Providing and laying in position cement concrete of M20 grade with 20 mm downgraded stone aggregate for all type of work up to plinth level, including the cost of dewatering if any is required, labor, material, tools and plant, cartage, conveyance and any other item that may be required for the completeness of work in all respect (excluding the cost of centering and shuttering ) as per the specification and standards, drawings, and as directed by the Engineer In-charge
2.85
7275
20734.46
... More
Providing and constructing Brick work with F.P.S bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including the cost of all labor, tools and plant, cartage, conveyance and other item that may be required for the completeness of work in all respect as per specification and standard, drawings and as directed by the Engineer In-charge walls including all deduction .
20.22
7571
153096.74
... More
P/F 3 phase 11 KVA heavy duty drop out fuse set.
1
3000
3000
... More
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
1000
8
8750
... More
Timber at an average lead of 4 km
1.07
209
224.5
... More
Providing, installation, testing and commissioning of 400 Amp, 3 phase LT Motor control panelindoor type, totally enclosed dust and vermin free, internally wired.Body to be fabricated out of 14-gauge (2mm) sheets duly alkalized and painted with enamel paint (Powder Coated). The LT panel shall comprise of the following and should operate on 3-phase AC supply INCOMING FEEDER: -One no. incoming feeder consisting of TPN air insulated 400 A Al.Bus-bar arrangement. The incoming feeder shall house one no. 4-Pole MCCB [L&T C-Power/ Siemens/Schneider Make] 400A, 50 KA breaking capacity with thermal magnetic release, manual draw out type. The front of the panel shall have the following flush type meters mounted on it: • 01 No. Ammeter, 96 mm2size of 0-400Arange (Rishabh/ AE/ equivalent) with 4way selector switch (Teknic/ equivalent).
• 01 set of three indicating neon bulbs.
• The panel shall be channel mounted and cable glands to be provided.
• 01 no. Voltmeter, 96 mm2 size, 0-500 V range (Rishabh/ equivalent make) with 4-way selector switch (Teknic/ equivalent).
• Frequency meter and hour-meter
• CTs of adequate range for Ammeter /Kw-Hr Meter and frequency meter.
• Complete control wiring for protection release
OUT GOING FEEDER:02 No. outgoing feeders, each outgoing feeder shall house the following;
3P 415V 250A, 50 KA breaking capacity MCCB with thermal magnetic release. – 01no. [L&T/Siemens/Schneider Make]
Air insulated Aluminium Bus Bar arrangement of suitable rating. The front of the panel shall have the following flush type meters mounted on it.
• 01 No Ammeter, 96mm2 size, 0-200 A range Rishabh make with 4-way selector switch (Teknic/ equivalent).
• 01 Set of three indicating neon bulbs.
• 01 No. Voltmeter, 96mm2size, 0–500-volt range AE make with 4-way selector switch, (Teknic/ equivalent).
• CTs of adequate range for Ammeter.
• Complete control wiring for protection release
AUXILIARY FEEDER: 01 No., Auxiliary compartment shall have 01 No. MCCB of 100A capacity, 4–Pole, 36 KA(L&T/ Havells/ Siemens make) and Aluminium bus bar arrangement of adequate rating for Priming pump and other auxiliary requirements of the pump house. The LT Panel shall also be provided with 02 No. Earthing terminals, lifting hooks and arrangement for incoming and outgoing cables.
1
200000
200000
... More
Providing and fitting of ant climbing devices with danger plates on poles
4
355
1420
... More
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
2
2072
4144.2
... More
Constructing muthu bunds, comprising boulders and wood bushes in alternate layers; including working in water situations.
90
1622
146002.5
... More
Providing and fixing of D Clamps with nuts and all accessories in all respects.
30
250
7500
... More
Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc
362.4
628
227931.48
... More
Dry stone pitching, 225mm thick, including cost of stones and preparation of surface-Quarry stone
120
478
57426
... More
Providing 6 mm Cement Plaster to ceiling of mix 1:3 (1 Cement : 3 Fine Sand) including the cost of all labor, material, tools and plant, cartage, conveyance and any other item that may be required for the completeness of work in all respect as per specification and standards, drawings and as directed by the Engineer In-charge
25
241
6031.25
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
78.8
187
14759.24
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete-(Semi rigid pipe-32mm)
2
137
274.8
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately. ( First class kail wood)
0.78
108897
84939.93
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, welding, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Columns,Beams,Ties etc.
9042.6
120
1092346.08
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
2
582
1164.7
... More
Providing and fixing soil, waste and vent pipes (Sand cast iron S and S pipe as per IS:1729 )
15
1066
15997.5
... More
Providing and fixing plained eaves boarding (250x32 mm (nominal size ))
22
699
15396.7
... More
Electrical (Part C)
Scope: Design, manufacturing, providing, fitting, testing & commissioning of 100 HP FASD Starter. The Star-delta Starter Panel shall be fabricated out of 1.67 mm CRCA Sheets Modular, compartmentalized, free Standing, floor Mounting, front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 42 protection) with TP Aluminum Buses, complete with connection, internal wiring, name plates, painting etc. generally as per details furnished below:
Rated Voltage of the Panel ----- 415 ± 10% Volts
Frequency ----- 50 HZ
No of Phases ----- Three Enclosure Details: Free Standing, Floor mounted compartmentalized design.
Material ----- CRS
Thickness of sheet steel used ----- 1.67mm
Application ----- Indoor
Cable Entry ----- Bottom
Painting ----- Shade Siemens grey. I) Distribution bus bar Type -----Electric grade Al with red, blue & yellow tapings of adequate section. Rating ----- 200 Amp II) Starters (FASD) Power Specification -----3 phase, 415 ± 10% v & 50 Hz
Contactors : Main Contactor ----- AC3 200A Star Contactor ----- AC3 110 A Delta Contactor ----- AC3 200 A Make: L&T of ML Series/TC/ABB Timer ----- Star Delta Electronic Qty ----- 1 No’s Phase failure Relay Qty ----- 1 No.
III) Protection Details:
Thermal Over Load Relay CT operated of suitable rating (Selec/Minilec/L&T/equivalent make approved by deptt.) ---- 01 No
Phase failure/ Phase Reversal Relay/motor protection relay/ single phase preventer (Selec/Minilec/L&T) ----- 01 No
IV) Metering Details: (a) Digital voltmeter S/S operated (1 No) (b) Digital Ammeters 0-200 Amp (1 No) - S/S CT operated (Rishabh /equivalent make)
1
150000
150000
... More
P/Erection of 13 Mtr long M S Tubular poles (410 - SP 33). The job also includes painting of poles in silver color over priming coat, grouting of poles in CC blocks of (1:2:4) mix, P/F of D shackles for holding cable, nuts and bolts etc. the job also includes spiral earthing of poles with GI wire.
4
25000
100000
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(n stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete).
1880
141
265832
... More
Manufacture, providing and installation of delivery manifold fabricated out of Mild steel pipes of 400mm and 500mm. The delivery manifold shall be strictly manufactured as per drawings. The job includes providing and fitting of nuts and bolts and rubber insertion cloth washers etc. The job also includes painting of the manifold in one coat of steel primer.
Material involving for manufacture of material:-
a) 400mm dia. 6.3 mm thick Mild steel pipe = 3Mtrs.
b). Mild steel flanges having 18mm thickness of 400mm dia. = As per requirement & drawing approximately 4 Nos.
c) 500mm dia. Mild steel pipe having 5.6mm thickness = 2 Mtrs.
d) 500mm dia. 18 mm thick Mild steel flange = Two No.
1
55000
55000
... More
Providing of tool kit as mentioned below of Taparia make:
i. D Spanner of Size (6 mm to 34 mm) ii. Ring Spanner Set of Size (6 mm to 34 mm) iii. Pipe Wrench 12 inch: (02 No)
iv. Hammer 1kg (01 No)
v. Plier (01 no)
vi. Screw driver multidrive(01 No) The job comprises of providing of G.I Box of size 450x300x250 mm along with locking arrangement/lock.
1
5000
5000
... More
Manufacturing, providing and installation of 400 mm dia. X (PO) mm dia. and 400 mm long concentric increaser fabricated out of 8 mm thick Mild steel plate duly flanged on both sides. The increaser is to be fitted on the delivery side of pumping equipment. The specifications of M.S flange on Reduced and enlarged side of increaser shall be as under: -
a). Reduced side flange: --(02 No, one number spare matching flange.)
i. Material = Mild steel
ii. Nominal dia. = (PO) mm as per pump outlet
iii. Thickness = 14 mm
b). Enlarged side flange: --(02 No, one number spare matching flange.)
i. Material = Mild steel ii. Nominal dia. = 400 mm iii Thickness = 14 mm
The job includes providing and fitting of nuts-and-bolts washers etc. and painting in one coat of steel primerfollowed by 02 coats of bituminous paint.
Note: PO = Pump Delivery dia.
2
20000
40000
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.( 2 mm thick)
146.05
181
26442.35
... More
Providing and laying centering and shuttering for all type of work, depth and shape including strutting, propping etc. and removal of form, including the cost of all material, labor, tools and plant, cartage, conveyance and any other item that may be required for the completeness of work in all respect, as per the specification and standards, drawings and as directed by the Engineer In-charge - Foundation Footing Basis
22.24
286
6368.42
... More
Providing Close timbering in trenches including strutting ,shoring and packing cavities (whenever required ) complete, including the cost of all material, labor, tools and plant, cartage, conveyance and any other item that may be required for the completeness of work in all respect as per specification and standards, drawings and as directed by the Engineer In-charge depth not exceeding (1.5m)
33.6
243
8190
... More
Fabrication, providing and fitting of working platform out of ISMB 200 to be erected on the sump to form the rectangular rigid frame structure 6 m x 1.5 m. ISMB 200: - 12 mtrs, The ISMB-200 main girder shall be welded together through the bracings/stiffeners of ISMC 75(15 mtr) at 6 spots each and 02 number vertical supports of 150mm MS Pipe of 6 mm Thick and of height 08 meters each shall have to be embedded in CC block of ratio 1:2:4 for the structure.The job includes Providing and fitting of M.S. plate 6mm thick to the rectangular ISMB frame of size 6x1.5 mtr with necessary bracings out of ISA 50x6(13 Mtr). The job also includes the formation of suitable opening with hinges at the requisite spots for installation of suction pipes. The job is to carried out as per the instructions of engineer in-charge. The steel work shall be applied with a coat of approved steel primer and paint.
1
135000
135000
... More
Steel at an average lead of 4 km
14.77
163
2410.32
... More
Stone aggregates at an average lead of 5 km (40mm)
97.2
218
21208.07
... More
Providing and laying centering and shuttering for all type of work, depth and shape including strutting, propping etc. and removal of form, including the cost of all material, labor, tools and plant, cartage, conveyance and any other item that may be required for the completeness of work in all respect, as per the specification and standards, drawings and as directed by the Engineer In-charge - Lintel , Beam ,Plinth beam.
66.42
577
38360.87
... More
Sand at an average lead of 4 km
87.88
183
16133.01
... More
Manufacturing, Supplying, Installing, commissioning and testing of 100 KVA Capacity Copper wound voltage stabilizer at site. The stabilizer shall be manually operated, oil cooled suitable for working on 3 phases 50+ 3% HZ AC voltage. The core shall be contained in a rectangular container made out of 2mm thick Mild Steel plate. The container has to be painted in two coats of steel primer both inside and outside and with two coats of super enamel paint of grey shade outside the container. The box shall be provided with suitable cooling pipes/fins to dissipate the heat generated. Lifting hooks of proper size for lifting stabilizer shall be provided on the top of the tank. The container of the stabilizer shall be mounted on wheels for easy shifting/positioning as and when required.
Copper Strips of suitable size shall have to be used for winding and fibre glass insulating material shall be used for insulating of copper strip. The core of the stabilizer shall be fabricated out of first class silicon 92 grade pota sheets cut to the size and then tightened securely. The stabilizer shall have suitable insulated lugs of appropriate size of cable connection.
The indicating glass of the transformer oil shall be provided on the stabilizer body.
Specifications.
Voltage Range = Input = 180-440 volts Output = 400 + 5%V
Tape Changer = Manually operated balance type changer of 8 tapings with tape position Indicator. Tape No: - 1 =Step down by not more than 50 volts.
Tape No: - 2 = line voltage.
Tape No: - 3-8 =These tapes shall be used to increase voltage in the range of 180- 440 volts to 400 volts The stabilizer shall be provided with a free standing type control panel made out of sheet metal dust and vermin proof internally wired having following accessories.
a). Two number voltmeter 100 mm square Digital type 0-500 volts, of, one each on incoming and outgoing circuits. The voltmeter is with fuse and selector switch for 3 phase.
b). A set of indicating lamps for 3 phase complete with fusing both in primary and secondary side of the transformer.
c). Red and green lamps for OFF/On display.
The stabilizer shall be filled with fresh transformer oil up to the required level. All the accessories and meters shall be of reputed make and to confirm relevant ISI standards. The voltage stabilizer is to be tested on full load for maximum hours at site.
The voltage stabilizer shall be provided with manufactures test certificate.
The job includes providing,fitting,testing and commissioning of 2 KVA Servo Stablizer with all requirments.
1
150000
150000
... More
P/F 3 phase 11 KVA heavy duty (G.O. Switch) complete with links and lever operated mechanism,nuts and bolts and in all complete respects.
1
16280
16280
... More
Fabrication, providing, installation and testing of 500 mm Nominal Diameter 6.3 mm thick mild steel pipes(35 meter) for Rising Main as per the following technical specifications:
S.No Details Requirement 1 Nominal Diameter = 500 mm
2 Thickness = 6.3 mm
3 Length of the pipe = 35 mtr.
4 Quality of MS plate to be used for manufacture = As per IS 2062
The pipes shall be fitted with M.S plate flanges 16 mm thick and washers, fasteners for end connections. The pipes shall be painted with two coats of anticorrosive metal primer and black bituminous paint. The Job includes Fabrication, providing and fitting of 500 mm Mild steel flap valve to be fitted to the Main Rising main pipe line. The flap valve shall be fabricated out of Mild steel plate and shall be of the following specifications: -
Thickness of body of flap valve = 8mm
Flange thickness = 18mm
Thickness of flap plate = 24mm
Length of valve from upper side= 300mm
Length of flap valve from lower side = 450mm
The flap valve shall be fitted with Mild steel ring all along the periphery on which the flap plate shall rest. A suitable heavy duty Mild steel hinges shall be fitted on the top of the valve. The flap valve shall be painted with one coat of steel primer& two coats of bituminous paint. The job also includes providing and fitting of nuts and bolts and rubber insertion cloth washers etc.
1
380000
380000
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. ( PN-16 pipe , 25mm OD(SDR-7.4)
25
519
12993.75
... More
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
5
704
3524
... More
Providing and fixing of fan point with PVC insulated copper with complete with heavy conduit PVC channels and fittings including 1200 mm ceiling fan of approved brand ISI mark. including the cost of all labor, material, tools and plants, cartage, conveyance and any other item that may be required for the completeness of work in all respect as per specification and standard, drawing and as directed by the Engineer In-charge , (as pe LMR)
2
6000
12000
... More
Fabrication, providing & fitting of trash rack/protection cover.The size of the trash rack shall be 2.10mtrx2.10 mtr and shall be in the form of gratings. The frame of the trash rack shall be fabricated out of Mild steel channel of size ISMC-75 and a stiffener of M.S angle Iron of size 50x50x6mm shall have to be fitted in between the trash rack for its additional strength.The frame shall be fitted with MildSteel Flat Iron strips of size 50x6mm welded vertically at a spacing of 50mm fromcentre to centre. The steel work shall be applied with one coat of steel primer and two Coates of sky blue paint before installation.
1
40000
40000
... More
Columns , Beams
16.88
9395
158599.42
... More
Providing and laying dry stone soling cm thick including supply of stones and preparing surface complete with all lead and lift including the cost of all materials, labor, tools and plant, cartage, conveyance and any other item that may be required for the completeness of work in all respect as per specification and standards, drawings and as directed by the Engineer In-charge
24.07
937
22558.4
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
10
68
680
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.-(80x1.25 mm M.S. laths with 1.25 mm thick top cover)
14.6
3305
48253
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) including all deductions.
54.8
98
5411.5
... More
Supply of Fire extinguisher ABC powder type (stored pressure) of 6 kg capacity with following feature
1) IS certified as per IS 15683,
2) Operating temperature 0 to 55 degrees with MAP powder complete in all respects suitable for all types of fires particularly electrical fires.
3) Wall hook and discharge pipe shall be supplied along with cylinder
2
4000
8000
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. impet and bitumen washers complete.
( 0.80 mm thick with zinc coating not less than 275 gram/m2)
6
840
5040.9
... More
Providing and laying M20 grade Reinforced cement concrete work with 20 mm downgraded stone aggregate in walls of any thickness and shape, including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. with all lead and lift and any height and depth including cost of dewatering, labor materials and tools and plant and any other item that may be required for the completeness of work in all respect as (excluding cost of centering, shuttering, finishing and reinforcement) as per the specification, drawings and as directed by the Engineer In-charge. Foundation blocks ,Raft Foundation, Foundation beams Longitudinal etc .
15
7788
116826
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Size of tile 600x600 mm )
18.66
1395
26032.57
... More
Painting with synthetic enamel paint of approved brand and manufactureto give an even shade.(Two or more coats on new work)
27.51
131
3627.19
... More
Providing and laying centering and shuttering for all type of work, depth and shape including strutting, propping etc. and removal of form, including the cost of all material, labor, tools and plant, cartage, conveyance and any other item that may be required for the completeness of work in all respect, as per the specification and standards, drawings and as directed by the Engineer In-charge - Column Rectangular
72
742
53463.6
... More
Providing and fitting of polymer type insulators including all fittings
12
350
4200
... More
Taking , editing & printing of HD photographes , before during and after execution of work ( Photograph Size 6"x 4")
10
60
600
... More
Providing and laying in position cement concrete of M15 grade with 40 mm downgraded stone aggregate for type of works up-to plinth level, including the cost of dewatering if required, labor, material, tools and plant and any other item that may be required for the completeness of work in all respect as per the specification and standards, drawings, and as directed by the Engineer In-charge
16.81
6540
109944.97
... More
External work including trenching, refilling etc.-(PN-16 pipe , 20mm OD (SDR-7.4))
20
187
3743
... More
Carriage of materials
Cement at an average lead of 3 km
50.78
147
7485.48
... More
Complete earthing of substation using suitable size and thickness Gi strip, baby insulators and GI plates ( 01 No for transformer body, 01 No for neutral and 01 No for LA set)
3
2000
6000
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer- (M.S. tube)
250
161
40262.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements