Indian Institute Of Technology Tender

Providing and Fixing Black & Yellow PVC Heavy duty Speed Breaker/Bump of size 250x350x50 mm with both side reflector having wt. of each plate not less than 4 kg/mtr. and bearing capacity 40 to 50 ton including nails and adhesive as per direction of Engineer – in – charge.

Providing and fixing Garware cricket net or equivalent for cricket pitch with twine thickness 2.5 mm, mesh size 45 mm with high valve of shock absorption good knot stability less mesh distortion on impact and green color as per the direction of Engineer-in- charge.

Providing and fixing of Linoleum flooring of 2 mm thick.

Providing and fixing of Frosted glass sheet. ( Garware or equivalent)

Supplying and fixing of High quality polycarbonate rolling shutter Korean slats with SS pipe with Gearbox of approved make as per approved sample and directions of the Engineer-in-charge.

Providing & fixing in position HDF Base wooden flooring with planks of sizes 8 mm thick, 1220 mm length (minimum) and 200 mm wide (minimum), in approved colour, texture and finish. The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm wherever required. The HDF wooden planks shall have minimum density of 900-950 Kg/m3. with Eco friendly UV coating, all complete as per direction of the Engineer in charge.(Make: Earcons, Stark Floor, Mikasa)

Supply, inspection, testing and commissioning of wall mounted chimney having width as 75 cm, suction power as 1200 m3/Hr, filter as filter less, function type as heat auto clean, finish as matte black, controls touch and gesture, number of speeds as 3, LED 2 x 1.5 watt rectangle, Dimension 750 x 410 x 435 mm warranty as 2 years on chimney & 8 years on motor including fixing ventilation pipe with necessary arrangements, as directions of the Engineer in charge, transportation, labour, necessary material, taxes, loading & unloading etc. all complete. Nothing to be paid extra. (Make Faber, Glen, Elica)

Proving and fixing of D-type handle of size 300 mm long of make Dorma as per the directions of Engineer-in-charge.

Providing and fixing of mid lock for glass doors as per the directions of Engineer-in-charge.

Providing and fixing of dome door stopper of make Dorma as per the directions of Engineer-in-charge.

Providing and fixing of 12 mm thick toughened glass Partition with SS 304 steel type frame and all accessories, loading, unloading, carriage with all respect. Nothing to be paid extra.

Supply and fixing of MS Laser cutting sheet (CNC) 3 mm 1200 x 600 MS 10 SAG as per the directions of Engineer-in-charge.

Providing and Fixing of Manually operated roller blinds as it’s Hardware comprises Control Unit and Idler are mounted on Top Aluminum Head Rail with powder coated MS bracket TOP TUBE: Made of extruded aluminum with 38 mm Dia. weight 0.38 Kg/mtr fabric fitted on the tube with double side tape. Roller Tube is an anodized extruded tube of high strength; control Unit and idler are fixed to the either ends of the tube. CLUTCH MECHANISM: Made of High Strength reinforced plastic the plastic which is operated directionally by the use of endless beaded chain. Clutch never needs adjustment. Operating chain Plastic 4.5 mm plastic beads molded on 2.2mm tick polyester chord The pitch of Beads is 6mm for smooth operation of blinds. LOCKING MEMBER: Plastic/ steel stop locks for limit setting adoptable to the steel chain. Bonding (Fabric tube):30/36 mm wide double sided adhesive tape of 3M for strong capacity. Bottom Bar : aluminum extruded circular 21 mm OD section with powder coated white finish, having a Min. weight to be 0.28 Kg/Mtr for a perfect fall of fabric to avoid war page / floating. Ends are covered with end caps to give a perfect finish with a Classic screen series of Roller fabric composition with 75% PVC , 25% Polyester; Weight 880 Gsm, Thickness 0.1 mm, Openness factor 1%, Fire classification NFPA NO.701.BS 5867, Part-2Type A fabric. All as per direction of engineer in charge. (Marvel, Vista, Dedcor,)

Providing and fixing 40/68 mm thick PUF insulated Corrugated Panel 40 mm thick (colour as required by Engineer-in-Charge) with crest of 28 mm and required pitch with 0.5mm PPGL sheet both sides in 40±2 Kg Density, The PU panel shall be CFC free using n-Pentane as a blowing agent. Panel shall have PPGL sheet on both side of Polyurethane Foam confirming to IS 12436:1988.The pre coated sheet shall be of minimum 550 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS :513 : 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGL sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The PU Foam shall be self-extinguishing, fire retardant type having minimum density of 40 Kg/Cu.mt (+, -2 Kgs) The roofing panels shall be fixed to purlins using STSD screws having suitable washers & length complete as per direction of Engineer-in- Charge

Supply of Stainless Steel bollard of Grade 304 of weight 43 kg approx. including Buffing etc. as per the direction of Engineer-in-charge.

Providing and fixing of POLYGAL make 16 mm thick multicell Polycarbonate standing seem 6-7 layers Panel System sheets for covering the roof at site including silicon sealant and cold forged SDST screws complete as per the BOQ. (As per the approved sample). The rate includes all wastage, flashings and ridges wherever required.

Providing and laying of ITF classified material “Brand Techno court” 8 layers System synthetic acrylic for Synthetic Badminton court: (1 layer) Concrete primer, (2 layers) Resurfacer, (3 layers) cushion rubber, (2 layers) Top coat, line marking including transportation, loading, unloading, installation with taxes, labour, material, all over heads etc. as per the directions of EIC. Nothing to be paid extra.

Providing and fixing 4mm thick ACP sheet, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.

Quoted Rate in (%) above/below