Indian Institute Of Carpet Technology Tender

Shade card winding machine It should have following specifications: Completely automatic, with digital display.  Single geared motor with traverse mechanism.  10 Bobbin at a time can be used.  Provided with stand to accommodate 10 baby cones. Has digital counter to set the number of rotations Rust proof coating  At least 500 empty cards shall be provided Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Universal Tensile Strength Tester To determine Tensile strength and elongation of fabric, carpet and thread as per CRE principle . It should have following specifications: Instrument Detail : The instrument should be digital with window based software having automatic control of unit , user friendly interface and presentation of test reports together with data storage and retrieval with following features - Capacity -20 KN Type of loading : Axial Load cell capacity 20 KN ( measuring range 20 N to 18 KN as per DIN EN ISO 7500 ) Accuracy of load cells : Both 0.5 % & 1% as per DIN EN ISO 7500-1 Breaking Force of load cell : 300 % of the maximum load capacity of the load cell Digital Servo Drive system Page 18 of 29 IICT/Tender/Document/2020-21 Speed of the machine : 0.001 mm/min to 500 mm/min ( step less variable ) Safety Features : In built protection / control in the machine for following conditions - Load cell overall protection via software limit switch - Both hardware & software limit switch for over travel of traversing crosshead in both direction (Up & down ) - Automatic stopping & return of the machine to the original position with a click of a button - Emergency switch - Suitable Grips for testing of fabric , carpet and thread strength : Test Software : Window based software for testing , data acquisition and representation of result for CRE tests .The software should have following featureso Preparation of Test o Carrying out of test o Full statistical Analysis o Real time Graphical display o Real Time Test Results o Data Acquisition Accessories Required: All standard accessories Reference Standards : ASTM D 2256, ASTM D 5034 / IS 1969 Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Motorized Digital Wrap Reel It should have following specifications:  Digital panel with resettable revolution counter and auto stop.  Supplied with a wheel of 1 meter or 1.5 yards perimeter with support creels / Bobbin holding stand to accommodate bobbins up to 100mm. Page 19 of 29 IICT/Tender/Document/2020-21  Adjustable double bar yarn tensioner and yarn guides  Five leas can be made together( Min)  Complete with all accessories, 5-station yarn package stand and collapsible swift. Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provide

Motorized Yarn Appearance Board Winder Instrument consists of a yarn wrap board. The board is rotated automatically to wrap yarn over it .The yarn is guided on to the board through a yarn guide , which moves parallel to the pivoting axis of the board giving uniformly spaced wraps . The guide is positively linked to the rotation of the board with the help of a chain and sprocket drive. A set of change gears gives six different spacing to the yarn for wrapping yarn of different counts. A spring loaded adjustable tensioning arrangements provide the desired tension to the yarn. A specially designed bobbin holder provides holding of yarn bobbin to check. Testing is carried out as per ASTM D 2255. It should have following specifications: Specification: Instrument should be built on rigid heavy base with standard finish. Instrument and its all components should be corrosion resistant. Traverse speed option for yarn wrapped @ 20,22,26,32,38,& 48 ends per inch . Size of Acrylic tapered Board : 28.5 cm x 18 cm , taper angle 2 Degree 28.5 cm x 16 cm Size Acrylic rectangular Board : 28.5 cm x 18 cm Standard yarn spacing : 20,22,26,32,38, and 48 wraps per inch Accessories Required : Pointing needle 04 sets of tapered and rectangular boards each (Both white and Black Boards are required). One complete set of photographic standards for yarn grading in compliance with ASTM D 2255 (Range –Ne 1-12 , Ne 12-24 , Ne 24-36 , Ne 36-50 , Ne 50-75 , Ne 75-135 in std size 25 x15 inch Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Laundro-Meter The instrument should conform to IS/ISO 105 C10/ AATCC-61 Page 20 of 29 IICT/Tender/Document/2020-21 standards/IS) 105 C06. It should have following specifications:  It should handle both 08 numbers of 500ml capacity canisters ( pots) or 04 numbers 1200ml capacity canisters (pots) in the same machine.  Temperature range: It should meet the requirement of IS/ISO 105 C10 E(5) of 95±20 C  Number of stainless steel canister :08 numbers with capacity 500 ml and 04 numbers with capacity 1200 ml  Stainless steel ball 6 mm diameter:100 numbers  Stainless steel disc: 25 numbers as per AATCC metod  Carriage RPM :40±2  Corrosion resistant body with Inner chamber and top cover shall be of stainless steel and  Multifibre test fabric as per IS/ISO and AATCC method: 50 meter  Gray scale of change in shade and staining as per ISO and AATCC standard Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Crock Meter The instrument should conform to IS: 766/ AATCC-8/ISO X-12 standards. It should have following specifications:  Diameter of the Rubbing Finger : 16 mm & 25 mm  Load on the Finger : 9 N & 20 N  Length of the Traverse : 100 ±5 mm  Counter (Re-settable) : 4-Digit Counter  Rubbing cloths: 500 pieces  Motor driven auto stop Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Pile Thickness Guage Electronic Hand operated micrometer with following specifications :  Measuring Range : 0-30 mm  Accuracy : 0.02 mm  Head Diameter( Pressure Foot) : 12 mm  Lower Plate diameter(Anvil):50mm&75mm( interchangeable)  Test Pressure : 0.5 , 1 , 2 , 5 , 10 & 20 KpaPage 21 of 29 IICT/Tender/Document/2020-21 Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Moisture Meter It should have following specifications:  Supplied with 3 probes for fiber, yarn and fabric, blend conversion charts and carrying case interchangeable electrodes suitable for cones , hanks , bales and fabric  High frequency resistance measurement  Measuring accuracy : + 0.1 %  With calibration unit Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Tuft withdrawl Tester It should have following specifications:  Micro-computer control, large LCD display, automatic data processing.  Professional carpet tufting clamp.  Maximum load range=120N  Power supply =AC220v+_ 10%,50HZ Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

GSM Cutter It should have following specifications:  Cutting area: 100 cm².  Cutting depth: 5 mm. Model with 4 blades.  Equipped with one cork support plate and four spare blades.  Dimensions: (L) 170 x (W) 170 x (H) 150 mm Other requirements: Page 22 of 29 IICT/Tender/Document/2020-21 All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Electronic Weighing Balance It should have following specifications:  Weighing capacity 250 g and accuracy : 0.001 g  Digital reading ( LCD display)  RS 232 Port  Pan size : 12 cm  Sealed Housing  Auto Calibration Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Industrial Heater Press It should have following specifications:  Laboratory model with press head size approximately 2.5 Inch X 2.5 inch  For label fusing purpose on carpet  Digital Temperature control  Digital Timer  Adjustable Pneumatic Pressure Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Magnetic Stirrer (With Hotplate) It should have following specifications:  Max Speed -1200 RPM  Stirring capacity – 2 Ltr  Heating capacity – 300 watt  Solid State Electronic Speed Controller: 1 No  Display – Digital  Teflon coated Paddle dimension - 9×35 mmPage 23 of 29 IICT/Tender/Document/2020-21  Totally enclosed unit. Designed for use even in corrosive atmosphere and portable  Set - up plate material- Stainless Steel  Stir bar length -25 mm Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) .Note: Calibration certificate should be provided