Indian Army Tender

CATEGORY: Composite multi layer pipe with aluminium core interior tube bound , GI tank nipple 25mm 6 inch with check nut and washer , GI Elbow 32 mm , GI socket 32 mm , GI Equal Union inner dia 25mm , GI End cap 32 mm dia suitable for 32 mm outer dia pipe , GI connector 32 mm dia suitable for 32 to 25 mm outer dia pipe , GI Tee 32 mm dia suitable for 32 mm outer dia pipe , GI Reducer 25 x 20 mm outer dia pipe , GI nipple 25mm 3 inch long , M seal 100 gm each pkt Complete. , Cotton thread 100m long Complete. , Bib cock brass 15mm , GI nipple 25mm 4 inch long , GI Nipple 25mm 6 inch long , GI Tee 25 mm , GI Tee 15 mm , GI socket 25mm , Gate valve brass or gun metal 25 mm dia complete , GI pipe 15 mm dia medium grade , GI pipe 20 mm dia medium grade , GI Reducer 25 mm to 15 mm , GI Reducer 25 mm to 20 mm , GI Elbow 25 mm , GI Elbow 15 mm , GI Nipple 15mm 4 inch long , GI Nipple 15mm 6 inch long , GI socket 15mm , GI union 15mm , GI union 25mm , GI Plug 25mm , GI Plug 15mm , TMT Anchor pins to secure CML pipe at the rate of 10m distance , Triplex plunger pump with 10 HP diesel engine at the rate of 1500 RPM aligned on a common base frame complete with all fittings and accessories coupled with pump of 7.5 HP at the rate of 550 RPM , Triplex plunger pump with 6 HP diesel engine at the rate of 1500 RPM aligned on a common base frame complete with all fittings and accessories coupled with pump of 5 HP at the rate of 450 RPM , Pre fabricated Pump Shed of size 2.4M X 2.4M and height 1.8M at front side and 1.60 M at rear side above FFL 300 mm hight with Angle Iron of 50x50x6 mm , Rotational moulded polyethylene water storage tank including cylindical vertical with closed top of 5000 Ltrs capacity , Rotational moulded polyethylene water storage tank including cylindical vertical with closed top of 2000 Ltrs capacity , Quick setting compound , Natural sand confirming to IS 383 1970 , Stone Aggregate to be crushed rock or gravel 20mm graded confirming to IS 383 1970 , Stone Aggregate to be crushed rock or gravel 40mm graded confirming to IS 383 1970 , Common building burnt clay bricks sub class B of size 23cm x 11.5cm x 7.5cm with sharp corners free from organic materials hard and well burnt with uniform size free from flows and cracks. , HDPE sand bag laminated off size 75 x 40 cm sand colour and each bag having weight not less than 60 grms. , Brick Trowel Steel 305 mm with handle. , Plaster Trowel with hard wooden Handle ISI marked. , Galvanised Iron Pan Mortar Tasla 16 Gauge 16 inch dia minimum weight of 1.5 Kg , Showel Square Nose 14 Gauge TATA High Carbon Steel Product Code SVL 022 blade size 310 x 245 mm shaft size 710 mm fitted with strong Steel crutched hard wooden handles , Brick hammer 1.2Kgs , Hacksaw frame with 2 blade , Mason trowel. Karchi , Picks Axes with Chiesel and Point ends. Kudali 14 CP. Nominal weight 3.0 Kg overall length minimum 595 mm with hard wooden handle. , Phowrah with hard wooden handles with min weight 2.00 Kgs , Crowbar 25mm 5 feet long , Multipurpose Non Slip Rubber Reusable Gloves for scrubbing cleaning brick work etc. Colour Olive Green or Black. Make SAFEYURA or ESAB or Jupiter Seamless. , Aluminum spirit level 6 inch , Brick Line , Plumbing dye set 25.50 mm