Indian Army Tender

CATEGORY: Supply of stuctural and construction material for AMN PD. , Natural sand confirming to IS 383 1970 , Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded confirming to IS 383 1970 , Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded confirming to IS 383 1970 , Reinforcement. TMT steel bars 12 mm dia bar , Reinforcement. TMT steel bars 10 mm dia bar , Reinforcement. TMT steel bars 8 mm dia bar , MS Binding wire not less than 0.9mm dia , Ply wood 1.50m x 0.20 m and 12mm thick for shuttering of RCC Roof band. , Ply wood 10 mm thick as per requirement for flat surface , Load bearing concrete PCC Solid Blocks of size 400mm x 200 mm x 200 mm , ISMB 150 RSJ 150 x 75mm 3.5 m long conforming to IS 808 1973. , ISMC 75 x 40 mm conforming to IS 808 1973, 3.5m long. , 5mm thick MS plate of size 250 x 75 to be welded with ISMB on both ends for fixing 4 Nos x 16mm dia foundation bolts , 5mm thick MS plate of size 175 x 50 to be welded with ISMB on both ends for fixing 4 Nos x 12mm dia foundation bolts , 20 Nos 12mm dia 150mm long foundation bolt to welded with 150mm long MS angle of Size 50x50x6mm at roof for fixing Rafter and at rear to fix purlin , 4 Nos x 12mm dia, 100mm long foundation bolt with nut and 2 Nos x 3mm thick steel washer per ISMC , 4 Nos x 16mm dia and 100mm long foundation bolt with nut and 2 Nos x 3mm thick steel washer per ISMB , Steel Roofing Trough or SRT of size 1500 x 613 x 180mm made out of 2mm thick hot rolled carbon steel conforming of IS 5986 EE 330 complete with set of 14 Nos MS hexagonal nuts. Bolts and washers. , Steel Roofing Trough or SRT of size 1100 x 613 x 180mm made out of 2mm thick hot rolled carbon steel conforming of IS 5986 EE 330 complete with set of 14 Nos MS hexagonal nuts. Bolts and washers. , HDPE laminated sand bags of size 75 x 40cm , Oil Bound distemper of Approved brand. Sample to be approved before supply. Make Asian Berge Shalimar , PBS roll Self finished tarfelt Grade 1 conforming to IS 1322-1980 of size 20m x 0.90 m , 0.60mm thick PPGI sheet of size 3.00mX1.00m for roof at entrance , 3.00M long Rectangular hollow section or RHS of Size 66 x 33 x 2.90mm at rafter of roof at entrance , 2.30M long Rectangular hollow section or RHS of Size 66 x 33 x 2.90mm at Purlin of roof at entrance , 150mm long MS angle of size 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix PPGI sheets. , Self taping screw 80mm , Integral water proofing compound confirm to IS 4645 1975 , Quick setting compound rapidite confirming to IS specification. , Silicone Gel sealant of 01 pack of 400 gms including applicator gun , Thinner. Make Asian Berge Shalimar. , Chalk white , Cement base paint , Bitumen for filling of expansion joint of PCC , HDPE sheet having weight 100 gm per Sqm Black of width 5.50mm Confirming to IS 2508 1984 , Pre-fabricated steel window loop hole of size 600mm x450mm shall be provided with Amn Pd. The main frame work shall be MS angle of size 50 x 50 x 6mm. , Pre prefabricated Steel door confirming to IS 1038 1938 of size 900mm x1800mm. , MS rack of size 1.22m x 0.61m x 1.65m will be supplied alongwith each PD. , Fire extinguisher of capacity 6 Kgs alongwith its accessories confirming to IS 13849 , Lighting Conductor all as per store list attached at Appendix C in PDF. , Tools and plants