Indian Army Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Indian Army Tender
Paints and Enamels
GEM
Opening Date16 Jun 2024
Closing Date8 Jul 2024
Tender Amount₹ 2,11,50,000
Auction Start Date20 Jul 2024
Auction End Date22 Jul 2024
Costs
EMD
₹ 6,34,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
GEM/2024/B/5058304Bid Award Id
ViewTender No
GEM/2024/B/5058304Tender Authority
Indian Army ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
living_bunker_2024-06-16-12-17-33_0dd7cef683cfe3d3d45b1fc74423e0fe.pdf
living_bkr_-_copy_2024-06-16-12-17-33_595a7b175c615788aee49398f6f2104c.csv
BOQ Items
20 Nos x 12mm dia, 150mm long foundation bolt to welded with 150mm long MS angle of Size 50x50x6mm , 20 Nos x 12mm dia 150mm long foundation bolt to welded with 150mm long MS angle of Size 50x50x6mm at roof for fixing Rafter 12 Nos and at rear to fix purlin 8 Nos and conforming to relevant IS Total 20 Nos of Fdn bolts reqd fto weld with MS angle.
100
-
-
Steel Roofing Trough SRT of size 1700 x 613 x 180mm made out of 2mm thick hot rolled carbon steel confroming relevant IS complete , Steel Roofing Trough SRT of size 1700 x 613 x 180mm made out of 2mm thick hot rolled carbon steel confroming relevant IS complete with set of 14 Nos MS hexagonal nuts. Bolts and bitumen and steel washers 12 mm dia 40mm long and a spanner OJDE of size 20 to 22 per 10 Nos of SRT including applying two coats of synthetic enamel OG paint over a coat of red oxide primer. SRT shall not be less than 25.00 Kgs 5 percentage tolerance.
120
-
-
Steel Roofing Troughs SRTs of size 1270 mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel , Steel Roofing Troughs SRTs of size 1270 mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel conforming torelevant IS complete with set of 14 Nos MS hexagonal nut bolts and washers 12 mm dia 40mm long and a spanner OJDE of size 20 to 22 per 10 Nos SRTs including applying two coats of synthetic enamel OG paint over a coat of red oxide primer. SRT shall not be less than 18.68 Kgs, 5 percentage tolerance.
180
-
-
Pre cast RCC beams 110x110x1420mm minimum M 25 Grade. , Pre-cast RCC beams 110x110x1420mm minimum M-25 Grade. Four Nos 10mm dia TMT bars two each on top and bottom with 8mm dia MS bar stirrups spaced at 150mm cc will be provided as reinforcement complete all as per drg and also supply including 2 Nos MS flat for size 40mm x 6mm and 150mm long nut bolt arrangement as shown in the drawing. MS Flat strips of qty 130 Nos and 150mm long nut and bolts with washer of qty 260 Nos shall be provided with each PD by L1 Vendor. Steel Bar Make to be used ISI marked only.
755
-
-
Pre prefabricated Steel door confirming to IS 1038 of 1938 of size 900mm x1800mm. , Pre prefabricated Steel door confirming to IS 1038-1938 of size 900mm x1800mm. The door chowkhat frame made angle iron 50mm x 50mm x 6mm with 03 Nos holdfasts 150mm long each side of angle 35x35x5mm and shutter outer frame made of angle 35 x 35 x 5 mm covered with 2mm thick black carbon sheet welded or riveted on shutter frame work. Bracing 02 Nos x 1.22m long MS flat 50x6mm at braces in middle and 02 Nos diogonal bracing support to be provided made of MS FI 50x6mm at top & bottom door panels. 3 Nos 150mm butt hinges 2 Nos MS tower bolt 200mm long 01 at Top and 01 at bottom of shutter 2 Nos MS bow handle 125mm long two No MS sliding bolt 300mm long of 20mm dia plain round bar including all requisite iron mongery fittings with steel door. Applying two coat of synthetic enemal paint OG over one coat of red oxide primer before supply of door complete . All materials shall conforming to relevant IS
5
-
-
Steel window of size 1200mmx300mm , Steel window of size 1200mmx300mm shall be provided. The main frame work shall be MS angle of size 50 x 50 x 6mm and 02 Nos of shutters shall be made from 6mm thick MS plate. Whereas MS angle frame at top and bottom shall be split in to two rows to slide the shutters smoothly within MS angle. MS angle shall be split into rows by welded with two nos of MS flat of size 50x6mm one at mid and other at edge along the length of the angle. Two Nos of bow handles shall be provided for easy opening and shifting the shutters. Two Nos of 100mm long tower bolts shall be provided. Chain link mesh wire of dimension 50x50x3.6mm shall be fixed with the help of MS flat 50x6mm over the window frame by welded externally iIncluding of all iron mongery etc. Windows shall be painted with two coats of OG Synthetic enamel paint over one coat of red oxide primer.
20
-
-
0.60 mm thick PPGI sheet of size 4270 mm x 1000mm for roof at entrance , 0.60 mm thick PPGI sheet of size 4270 mm x 1000mm for roof at entrance.
15
-
-
Ply wood 10 mm thick as per requirement for flat surface for roof. , Ply wood 10 mm thick as per requirement for flat surface for roof.
165
-
-
3.00 M long rectangular hollow section of size 66x33x2.90 mm at raftrer of roof at entrance 16.02 kg per meter , 3.00 M long rectangular hollow section RHS of size 66x33x2.90 mm at raftrer of roof at entrance 16.02 kg per m
10
-
-
2.30M long Rectangular hollow section of Size 66 x 33 x 2.90mm at Purlin of roof at entrance 16.02 Kg per meter. , 2.30M long Rectangular hollow section RHS of Size 66 x 33 x 2.90mm at Purlin of roof at entrance 16.02 Kg per m. 03 Nos reqd at roof and 02 Nos reqd at rear of the entrance to fix PPGI sheets.
25
-
-
150mm long MS angle of size 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix PPGI sheets. , 150mm long MS angle of size 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix PPGI sheets. 10 Nos of holdfast 4 Nos at rear wall 6 Nos at roof.
50
-
-
Self taping screw 80mm , Self taping screw 80mm
5
-
-
Reinforcement Mild Steel TMT bars 12 mm dia conforming to relevant IS. , Reinforcement -Mild Steel TMT bars 12 mm dia conforming to relevant IS.
1920
-
-
Reinforcement Mild Steel TMT bars 10 mm dia conforming to relevant IS. , Reinforcement - Mild Steel TMT bars 10 mm dia conforming to relevant IS.
825
-
-
Reinforcement Mild Steel TMT bars 08 mm dia conforming to relevant IS. , Reinforcement - Mild Steel TMT bars 08 mm dia conforming to relevant IS.
1185
-
-
MS binding wire Annealed not less than 0.9mm dia confirming to relevant IS. , MS binding wire Annealed not less than 0.9mm dia confirming to relevant IS.
175
-
-
Ply wood 4450mm x 300mm and 12mm thick for shuttering of RCC Plinth Beam. , Ply wood 4450mm x 300mm and 12mm thick for shuttering of RCC Plinth Beam.
60
-
-
Ply wood 4450mm x 150mm and 12mm thick for shuttering of RCC Roof band. , Ply wood 4450mm x 150mm and 12mm thick for shuttering of RCC Roof band.
210
-
-
Ply wood 1500M X 200mm and 12mm thick for form work for Lintels and opening of doors or windows. , Ply wood 1500M X 200mm and 12mm thick for form work for Lintels and opening of doors or windows.
120
-
-
Natural sand confirming to IS 383 1970 , Natural sand confirming to IS 383 of 1970 Specifications for coarse and fine aggregates. Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete.
35
-
-
Manufactured sand confirming to IS 383 2016 , Manufactured sand M Sand confirming to IS 383 of 2016 Specifications for coarse and fine aggregates. Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete.
150
-
-
Aggregate 20mm , Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded confirming to relevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out
60
-
-
Aggregate 40mm , Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded confirming torelevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out.
95
-
-
Load bearing concrete PCC Soild Blocks of size 400mm x 200 mm x 200 mm , Load bearing concrete PCC Soild Blocks of size 400mm x 200 mm x 200 mm using plain cement concrete of ratio 1 3 6 type C1 16mm graded stone aggregate solid block shall be sound free from cracks broken edges honey combing and other defects that would interere with the the proper placing of blocks or impair the the strength or performance of construction and have a compressive strength of M15.
21720
-
-
Common building burnt clay bricks sub class B of size 23cm x 11.5cm x 7.5cm with sharp corners , Common building burnt clay bricks sub class B of size 23cm x 11.5cm x 7.5cm with sharp corners free from organic materials hard and well burnt with uniform size free from flows and cracks confirming to IS 1077 of 1986 fourth revision. Designation 75 Kgf per Sqcm.
8610
-
-
HDPE Sand Bag of size 75x40 cm , HDPE Sand Bag of size 75x40 cm Sand colour and each bag having weight not less than 60 gms.
2370
-
-
PBS Roll Self finished tarfelt hessian base for water proofing Grade 1 conforming torelevant IS of size 20m x 0.90m , PBS Roll Self finished tarfelt hessian base for water proofing Grade1 conforming torelevant IS of size 20m x 0.90m weight of each roll shall not be less than 42.50 Kgs plus 2.5 Kgs in dry conditions. The finished mtrl shall be free from visible external defect such as holes oil patches ragged or untrue edges brakes cracks tears protuberances and indentations.
35
-
-
Synthetic Enamel Paint colur OG or Chocolate , Synthetic enamel paint colour OG pr Chocolate 1st quality conforming to IS 20174 of 1979
75
-
-
Quick setting compound , Quick setting compound Rapidite Make Acclerex or Cico or Fosroc.
770
-
-
Integral Water Proofing Compound , Integral Water Proofing Compound as per approved sample and make and IS 4645 of 1975. Make Pidilite Dr fixit
175
-
-
Silicone gel sealant of 01 pack of 400 gms including applicator gun. , Silicone gel sealant of 01 pack of 400 gms including applicator gun.
60
-
-
HDPE sheet having weight 100gm per sqm BLACK of width 5.5m. , HDPE sheet having weight 100gm per sqm BLACK of width 5.5m.
655
-
-
Thinner , Thinner Make Asian or Berge or Shalimar.
15
-
-
Cement base paint , Cement base paint. Make Duracem Snowcem and British xtracem
25
-
-
Prefeb welded Ventilator lintel made out of 02 Nos ISMC 200x75mm , Prefeb welded Ventilator lintel made out of 02 Nos ISMC 200x75mm Weight at the rate of 22.30 Kgs per RM of 1000mm length will be provided over door Window Loop Hole including jointing the two channel with proper nuts and bots system and including welding work complete including one coat of red oxide primer. Steel shall conform to IS 800.
25
-
-
Prefeb welded Window lintel made out of 02 Nos ISMC 200x75mm , Prefeb welded Window lintel made out of 02 Nos ISMC 200x75mm Weight at the rate of 22.30 Kgs per RM of 1500mm length will be provided over door Window Loop Hole including jointing the two channel with proper nuts & bots system and including welding work complete including one coat of red oxide primer. Steel shall conform to IS 800.
20
-
-
False ceiling made of 40 mm thick PUF insulated panel with 0.63 mm thick , False ceiling made of 40 mm thick PUF insulated panel with 0.63 mm thick hot dipped galvanised steel sheet on both side supported with held of inverted Tee Sec 50X50X50 mm thick and L Sec of 50mmX50mmX5mm thick fixed to truss complete frame work as directed by buyer.
95
-
-
Wall panelling with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm , Wall panelling with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm and length of 2.74 or 3.05 9 feet x10 feet meters of D SPAZE or equivalent brand. Wt of PVC pannel is 4.5Kg per Sqm and PVC percentage in wall panels is more than 40 percentage wall panel are fire and termite proof and water proof wall panels are useable on the damp walls scantling of size 11 per 2inch x 2 inch for frame work including supply of sufficient qty of nails and L H U profile and corner profile with wooden fillets etc complete.
230
-
-
Supply of 1st quality non-skid coloured ceramic floor tiles fo size 300mmx300mm x7 to 8 mm thick Square , Supply of 1st quality non-skid coloured ceramic floor tiles fo size 300mmx300mm x7 to 8 mm thick Square Complete all as specified and directed
695
-
-
Supply of glazed ceramic coloured design wall tiles of size 450x300x7 to 8mm thick , Supply of glazed ceramic coloured design wall tiles of size 450x300x7 to 8mm thick for vertical surface complete all as specified and directed .
1445
-
-
MS Stand with each Living Bunker for water tanks 1000 ltr capacity shall be fabricated from MS angle 50 x 50 x 6 mm size 4.50 Kg per Rm for vertical legs , MS Stand with each Living Bunker for water tanks 1000 ltr capacity shall be fabricated from MS angle 50 x 50 x 6 mm 4.50 Kg per Rm size for vertical legs flat iron 40 x 8 mm 2.51 Kg per Rm for vertical legs bracings top frame of angle iron 40 x 40 x 6 mm 3.50 Kg per Rm with MS sheet of 14 gauge thickness 15.70 Kg per Sqm fixed on top all as per drg attached as Appx H and all angle iron used in MS Stand shall be conforming to IS 808 Part V of 1976. Four angles at each corners at top of size 50X50X6mm br provided vertically up height of each angle be 300mm. The mild steel stand will be provided with two coats of green paint over a coat of red oxide primer.
5
-
-
Supply factory made solid PVC moulded door D1 shutter 28 to 30mm thick stiles of size od 0.8mm x 2.05mm , Supply factory made solid PVC moulded door D1 shutter 28 to 30mm thick stiles of size od 0.8mm x 2.05mm with 2 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face with wood free EPS including solid PVC door frame of size of opening 0.90x2.10mm made of 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube with Stainless steel hardware i.e butt higes 100mm size 03 Nos barrel tower 150mm long 02 Nos sliding door bolts 250mm size 01 Nos and handle 150mm size 02 Nos complete.
15
-
-
Ventilator made of aluminium section 2.00mm thick shall be provided in one set of Each WC or Bath. Size of ventilator shall be 450mm x 600mm. , Ventilator V made of aluminium section 2.00mm thick shall be provided in one set of Each WC Bath. Size of ventilator shall be 450mm x 600mm. All ventilators shall have double polycarbonate 4 mm thick glazed shutter. When closed these shall be airtight and water proof. Suitable locking arrangement will be provided. The ventilator shall have single shutter made up of F7 Z Section. The shutter shall be top hung and shall be fixed to the frame with hinges of suitable size. The shutter opening inwards shall have polycarbonate transparent sheet fixed. The ventilator provided should be such that exhaust fan can be fixed easily from outside.
15
-
-
Aggregate 63mm. Stone Aggregate to be crushed rock or gravel 63mm graded confirming to relevant IS , Aggregate 63mm. Stone Aggregate to be crushed rock or gravel 63mm graded confirming to relevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out.
15
-
-
01x Soakage pit cover made of 1mm thick MS sheet of size1.90mx1.90m suitably welded with 50x50x6mm thick , 01x Soakage pit cover made of 1mm thick MS sheet of size1.90mx1.90m suitably welded with 50x50x6mm thick MS angle iron along the corners and diagonally shall be provided as shown in drawing. MS sheet will be welded with the help of MS Flat Iron 40x3mm thick on all sides and at the centre joint of the MS plate. Four Nos of lifting handle made of MS round bar shall be provided with each cover. One No of openable MS Hinged cover for inspection of size 600x400mm made of 1mm thick MS sheet frame with MS angle Iron 30x30x6mm and lifting handle with 5mm dia MS round bar complete as shown in the drawing attached. The cover shall be applied two coats of first quality synthetic enamel paint of sand color over two coats of red oxide primer after preparation of surfaces.
5
-
-
Rubber Membrane for water proofing. Ethylene Prolylene Diene Monomer Waterproofing Membrane , Rubber Membrane for water proofing. Ethylene Prolylene Diene Monomer Waterproofing Membrane Synthetic single ply preformed Waterproofing Membrane in black colour to be required to be laid all around the walls of UGLB. Walls of the UGLB to be plastered with 15mm thick plaster. Membrane to be initially laid between DPC and DLC at the floor level also as shown in drawing. The thickness of synthetic membrane should be in range between 1.2mm to 1.5mm. The specification of the membrane are as per specified in PDF.
445
-
-
Hydrophobic Poreblocking Ingredient as specified in PDF , Hydrophobic Poreblocking Ingredient as specified in PDF
260
-
-
Store list for Electrical items for one Living Bunker , Store list for Electrical items for one Living Bunker as specified Appx B in PDF
5
-
-
Store list of Water supply and sanitary fitting for one Living Bunker , Store list of Water supply and sanitary fitting for one Living Bunker as specified Appx C in PDF
5
-
-
Store list of furniture items for one Living Bunker , Store list of furniture items for one Living Bunker as specified Appx D in PDF
5
-
-
Jelly filled Lightning Conductor with complete specificatio , Jelly filled Lightning Conductor with complete specification as per PDF attached
5
-
-
Hesting Device Kerosene Based , Heating Device Kerosene Based complete as specified in PDF
5
-
-
Fire extinguisher 2 Kgs capacity. ABC MAP 90 , Fire extinguisher 2 Kgs capacity. ABC MAP 90 complete as specified in PDF.
10
-
-
ISMB size 150 x 75mm wt 15 Kgs per RM of 5.05m long , ISMB size 150 x 75mm wt at the rate of 15.00 Kgs per RM of 5.05m long shall be welded with 02 Nos x 5mm thick MS plate of size 250x75x5mm on both ends of ISMB and including MS plates shall have 02 Nos x 16mm dia predrilled holes per plate for fixing fdn bolts also including 04 Nos x 100mm long 16mm dia fdn bolts which shall be grouted with 150mm thick RCC roof band and conforming to relevant IS.
42
-
-
ISMB size 150 x 75mm weight 15 Kgs per RM of 5.60m long , ISMB size 150 x 75mm wt at the rate of 15.00 Kgs per RM of 5.60m long shall be welded with 02 Nos x 5mm thick MS plate of size 250x75x5mm on both ends of ISMB and including MS plates shall have 02 Nos x 16mm dia predrilled holes per plate for fixing fdn bolts also including 04 Nos x 100mm long 16mm dia fdn bolts which shall be grouted with 150mm thick RCC roof band and conforming to relevant IS.
21
-
-
ISMB size 75 x 40mm of 5.05m long , ISMCs size 75 x 40mm of 5.05 m long shall be welded with 02 Nos x 5mm thick MS plate of size 175x50x5mm on both ends of ISMC and MS plates shall have 02 Nos x 12mm dia predrilled holes per plate for fixing fdn bolts and including 04 Nos x 100mm long, 12mm dia fdn bolts which shall be grouted with 150mm thick PCC of ratio 1 2 4 of size 400x175x150mm over roof band and conforming to relevant IS
35
-
-
20 Nos x 12mm dia, 150mm long foundation bolt to welded with 150mm long MS angle of Size 50x50x6mm , 20 Nos x 12mm dia 150mm long foundation bolt to welded with 150mm long MS angle of Size 50x50x6mm at roof for fixing Rafter 12 Nos and at rear to fix purlin 8 Nosand conforming to relevant IS Total 20 Nos of Fdn bolts reqd fto weld with MS angle.
140
-
-
Steel Roofing Trough SRT of size 1700 x 613 x 180mm made out of 2mm thick hot rolled carbon steel confroming relevant IS complete , Steel Roofing Trough SRT of size 1700 x 613 x 180mm made out of 2mm thick hot rolled carbon steel confroming relevant IS complete with set of 14 Nos MS hexagonal nuts. Bolts and bitumen and steel washers 12 mm dia 40mm long and a spanner OJDE of size 20 to 22 per 10 Nos of SRT including applying two coats of synthetic enamel OG paint over a coat of red oxide primer. SRT shall not be less than 25.00 Kgs 5 percentage tolerance.
168
-
-
Steel Roofing Troughs SRTs of size 1270 mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel , Steel Roofing Troughs SRTs of size 1270 mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel conforming torelevant IS complete with set of 14 Nos MS hexagonal nut bolts and washers 12 mm dia 40mm long and a spanner OJDE of size 20 to 22 per 10 Nos SRTs including applying two coats of synthetic enamel OG paint over a coat of red oxide primer. SRT shall not be less than 18.68 Kgs, 5 percentage tolerance.
252
-
-
Pre cast RCC beams 110x110x1420mm minimum M 25 Grade. , Pre-cast RCC beams 110x110x1420mm minimum M-25 Grade. Four Nos 10mm dia TMT bars two each on top and bottom with 8mm dia MS bar stirrups spaced at 150mm cc will be provided as reinforcement complete all as per drg and also supply including 2 Nos MS flat for size 40mm x 6mm and 150mm long nut bolt arrangement as shown in the drawing. MS Flat strips of qty 130 Nos and 150mm long nut and bolts with washer of qty 260 Nos shall be provided with each PD by L1 Vendor. Steel Bar Make to be used ISI marked only.
1057
-
-
Pre prefabricated Steel door confirming to IS 1038 of 1938 of size 900mm x1800mm. , Pre prefabricated Steel door confirming to IS 1038-1938 of size 900mm x1800mm. The door chowkhat frame made angle iron 50mm x 50mm x 6mm with 03 Nos holdfasts 150mm long each side of angle 35x35x5mm and shutter outer frame made of angle 35 x 35 x 5 mm covered with 2mm thick black carbon sheet welded or riveted on shutter frame work. Bracing 02 Nos x 1.22m long MS flat 50x6mm at braces in middle and 02 Nos diogonal bracing support to be provided made of MS FI 50x6mm at top & bottom door panels. 3 Nos 150mm butt hinges 2 Nos MS tower bolt 200mm long 01 at Top and 01 at bottom of shutter 2 Nos MS bow handle 125mm long two No MS sliding bolt 300mm long of 20mm dia plain round bar including all requisite iron mongery fittings with steel door. Applying two coat of synthetic enemal paint OG over one coat of red oxide primer before supply of door complete . All materials shall conforming to relevant IS
7
-
-
Steel window of size 1200mmx300mm , Steel window of size 1200mmx300mm shall be provided. The main frame work shall be MS angle of size 50 x 50 x 6mm and 02 Nos of shutters shall be made from 6mm thick MS plate. Whereas MS angle frame at top and bottom shall be split in to two rows to slide the shutters smoothly within MS angle. MS angle shall be split into rows by welded with two nos of MS flat of size 50x6mm one at mid and other at edge along the length of the angle. Two Nos of bow handles shall be provided for easy opening and shifting the shutters. Two Nos of 100mm long tower bolts shall be provided. Chain link mesh wire of dimension 50x50x3.6mm shall be fixed with the help of MS flat 50x6mm over the window frame by welded externally iIncluding of all iron mongery etc. Windows shall be painted with two coats of OG Synthetic enamel paint over one coat of red oxide primer.
28
-
-
0.60 mm thick PPGI sheet of size 4270 mm x 1000mm for roof at entrance , 0.60 mm thick PPGI sheet of size 4270 mm x 1000mm for roof at entrance.
21
-
-
Ply wood 10 mm thick as per requirement for flat surface for roof. , Ply wood 10 mm thick as per requirement for flat surface for roof.
231
-
-
3.00 M long rectangular hollow section of size 66x33x2.90 mm at raftrer of roof at entrance 16.02 kg per meter , 3.00 M long rectangular hollow section RHS of size 66x33x2.90 mm at raftrer of roof at entrance 16.02 kg per m
14
-
-
2.30M long Rectangular hollow section of Size 66 x 33 x 2.90mm at Purlin of roof at entrance 16.02 Kg per meter. , 2.30M long Rectangular hollow section RHS of Size 66 x 33 x 2.90mm at Purlin of roof at entrance 16.02 Kg per m. 03 Nos reqd at roof and 02 Nos reqd at rear of the entrance to fix PPGI sheets.
35
-
-
150mm long MS angle of size 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix PPGI sheets. , 150mm long MS angle of size 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix PPGI sheets. 10 Nos of holdfast 4 Nos at rear wall 6 Nos at roof.
70
-
-
Self taping screw 80mm , Self taping screw 80mm
7
-
-
Reinforcement Mild Steel TMT bars 12 mm dia conforming to relevant IS. , Reinforcement - Mild Steel TMT bars 12 mm dia conforming to relevant IS.
2688
-
-
Reinforcement Mild Steel TMT bars 10 mm dia conforming to relevant IS. , Reinforcement - Mild Steel TMT bars 10 mm dia conforming to relevant IS.
1155
-
-
Reinforcement Mild Steel TMT bars 08 mm dia conforming to relevant IS. , Reinforcement - Mild Steel TMT bars 08 mm dia conforming to relevant IS.
1659
-
-
MS binding wire Annealed not less than 0.9mm dia confirming to relevant IS. , MS binding wire Annealed not less than 0.9mm dia confirming to relevant IS.
245
-
-
Ply wood 4450mm x 300mm and 12mm thick for shuttering of RCC Plinth Beam. , Ply wood 4450mm x 300mm and 12mm thick for shuttering of RCC Plinth Beam.
84
-
-
Ply wood 4450mm x 150mm and 12mm thick for shuttering of RCC Roof band. , Ply wood 4450mm x 150mm and 12mm thick for shuttering of RCC Roof band.
294
-
-
Ply wood 1500M X 200mm and 12mm thick for form work for Lintels and opening of doors or windows. , Ply wood 1500M X 200mm and 12mm thick for form work for Lintels and opening of doors or windows.
168
-
-
Natural sand confirming to IS 383 1970 , Natural sand confirming to IS 383 of 1970 Specifications for coarse and fine aggregates. Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete.
49
-
-
Manufactured sand confirming to IS 383 2016 , Manufactured sand M Sand confirming to IS 383 of 2016 Specifications for coarse and fine aggregates. Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete.
210
-
-
Aggregate 20mm , Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded confirming to relevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out
84
-
-
Aggregate 40mm , Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded confirming torelevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out.
133
-
-
Load bearing concrete PCC Soild Blocks of size 400mm x 200 mm x 200 mm , Load bearing concrete PCC Soild Blocks of size 400mm x 200 mm x 200 mm using plain cement concrete of ratio 1 3 6 type C1 16mm graded stone aggregate solid block shall be sound free from cracks broken edges honey combing and other defects that would interere with the the proper placing of blocks or impair the the strength or performance of construction and have a compressive strength of M15.
30408
-
-
Common building burnt clay bricks sub class B of size 23cm x 11.5cm x 7.5cm with sharp corners , Common building burnt clay bricks sub class B of size 23cm x 11.5cm x 7.5cm with sharp corners free from organic materials hard and well burnt with uniform size free from flows and cracks confirming to IS 1077 of 1986 fourth revision. Designation 75 Kgf per Sqcm.
12054
-
-
HDPE Sand Bag of size 75x40 cm , HDPE Sand Bag of size 75x40 cm Sand colour and each bag having weight not less than 60 gms.
3318
-
-
PBS Roll Self finished tarfelt hessian base for water proofing Grade 1 conforming torelevant IS of size 20m x 0.90m , PBS Roll Self finished tarfelt hessian base for water proofing Grade1 conforming torelevant IS of size 20m x 0.90m weight of each roll shall not be less than 42.50 Kgs plus 2.5 Kgs in dry conditions. The finished mtrl shall be free from visible external defect such as holes oil patches ragged or untrue edges brakes cracks tears protuberances and indentations.
49
-
-
Synthetic Enamel Paint colur OG or Chocolate , Synthetic enamel paint colour OG pr Chocolate 1st quality conforming to IS 20174 of 1979
105
-
-
Quick setting compound , Quick setting compound Rapidite Make Acclerex or Cico or Fosroc.
1078
-
-
Integral Water Proofing Compound , Integral Water Proofing Compound as per approved sample and make and IS 4645 of 1975. Make Pidilite Dr fixit
245
-
-
Silicone gel sealant of 01 pack of 400 gms including applicator gun. , Silicone gel sealant of 01 pack of 400 gms including applicator gun.
84
-
-
HDPE sheet having weight 100gm per sqm BLACK of width 5.5m. , HDPE sheet having weight 100gm per sqm BLACK of width 5.5m.
917
-
-
Thinner , Thinner Make Asian or Berge or Shalimar.
21
-
-
Cement base paint , Cement base paint. Make Duracem Snowcem and British xtracem
35
-
-
Prefeb welded Ventilator lintel made out of 02 Nos ISMC 200x75mm , Prefeb welded Ventilator lintel made out of 02 Nos ISMC 200x75mm Weight at the rate of 22.30 Kgs per RM of 1000mm length will be provided over door Window Loop Hole including jointing the two channel with proper nuts and bots system and including welding work complete including one coat of red oxide primer. Steel shall conform to IS 800.
35
-
-
Prefeb welded Window lintel made out of 02 Nos ISMC 200x75mm , Prefeb welded Window lintel made out of 02 Nos ISMC 200x75mm Weight at the rate of 22.30 Kgs per RM of 1500mm length will be provided over door Window Loop Hole including jointing the two channel with proper nuts & bots system and including welding work complete including one coat of red oxide primer. Steel shall conform to IS 800.
28
-
-
False ceiling made of 40 mm thick PUF insulated panel with 0.63 mm thick , False ceiling made of 40 mm thick PUF insulated panel with 0.63 mm thick hot dipped galvanised steel sheet on both side supported with held of inverted Tee Sec 50X50X50 mm thick and L Sec of 50mmX50mmX5mm thick fixed to truss complete frame work as directed by buyer.
133
-
-
Wall panelling with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm , Wall panelling with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm and length of 2.74 or 3.05 9 feet x10 feet meters of D SPAZE or equivalent brand. Wt of PVC pannel is 4.5Kg per Sqm and PVC percentage in wall panels is more than 40 percentage wall panel are fire and termite proof and water proof wall panels are useable on the damp walls scantling of size 11 per 2inch x 2 inch for frame work including supply of sufficient qty of nails and L H U profile and corner profile with wooden fillets etc complete.
322
-
-
Supply of 1st quality non-skid coloured ceramic floor tiles fo size 300mmx300mm x7 to 8 mm thick Square , Supply of 1st quality non-skid coloured ceramic floor tiles fo size 300mmx300mm x7 to 8 mm thick Square Complete all as specified and directed
973
-
-
Supply of glazed ceramic coloured design wall tiles of size 450x300x7 to 8mm thick , Supply of glazed ceramic coloured design wall tiles of size 450x300x7 to 8mm thick for vertical surface complete all as specified and directed .
2023
-
-
MS Stand with each Living Bunker for water tanks 1000 ltr capacity shall be fabricated from MS angle 50 x 50 x 6 mm size 4.50 Kg per Rm for vertical legs , MS Stand with each Living Bunker for water tanks 1000 ltr capacity shall be fabricated from MS angle 50 x 50 x 6 mm 4.50 Kg per Rm size for vertical legs flat iron 40 x 8 mm 2.51 Kg per Rm for vertical legs bracings top frame of angle iron 40 x 40 x 6 mm 3.50 Kg per Rm with MS sheet of 14 gauge thickness 15.70 Kg per Sqm fixed on top all as per drg attached as Appx H and all angle iron used in MS Stand shall be conforming to IS 808 Part V of 1976. Four angles at each corners at top of size 50X50X6mm br provided vertically up height of each angle be 300mm. The mild steel stand will be provided with two coats of green paint over a coat of red oxide primer.
7
-
-
Supply factory made solid PVC moulded door D1 shutter 28 to 30mm thick stiles of size od 0.8mm x 2.05mm , Supply factory made solid PVC moulded door D1 shutter 28 to 30mm thick stiles of size od 0.8mm x 2.05mm with 2 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face with wood free EPS including solid PVC door frame of size of opening 0.90x2.10mm made of 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube with Stainless steel hardware i.e butt higes 100mm size 03 Nos barrel tower 150mm long 02 Nos sliding door bolts 250mm size 01 Nos and handle 150mm size 02 Nos complete.
21
-
-
Ventilator made of aluminium section 2.00mm thick shall be provided in one set of Each WC or Bath. Size of ventilator shall be 450mm x 600mm. , Ventilator V made of aluminium section 2.00mm thick shall be provided in one set of Each WC Bath. Size of ventilator shall be 450mm x 600mm. All ventilators shall have double polycarbonate 4 mm thick glazed shutter. When closed these shall be airtight and water proof. Suitable locking arrangement will be provided. The ventilator shall have single shutter made up of F7 Z Section. The shutter shall be top hung and shall be fixed to the frame with hinges of suitable size. The shutter opening inwards shall have polycarbonate transparent sheet fixed. The ventilator provided should be such that exhaust fan can be fixed easily from outside.
21
-
-
Aggregate 63mm. Stone Aggregate to be crushed rock or gravel 63mm graded confirming to relevant IS , Aggregate 63mm. Stone Aggregate to be crushed rock or gravel 63mm graded confirming to relevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out.
21
-
-
01x Soakage pit cover made of 1mm thick MS sheet of size1.90mx1.90m suitably welded with 50x50x6mm thick , 01x Soakage pit cover made of 1mm thick MS sheet of size1.90mx1.90m suitably welded with 50x50x6mm thick MS angle iron along the corners and diagonally shall be provided as shown in drawing. MS sheet will be welded with the help of MS Flat Iron 40x3mm thick on all sides and at the centre joint of the MS plate. Four Nos of lifting handle made of MS round bar shall be provided with each cover. One No of openable MS Hinged cover for inspection of size 600x400mm made of 1mm thick MS sheet frame with MS angle Iron 30x30x6mm and lifting handle with 5mm dia MS round bar complete as shown in the drawing attached. The cover shall be applied two coats of first quality synthetic enamel paint of sand color over two coats of red oxide primer after preparation of surfaces.
7
-
-
Rubber Membrane for water proofing. Ethylene Prolylene Diene Monomer Waterproofing Membrane , Rubber Membrane for water proofing. Ethylene Prolylene Diene Monomer Waterproofing Membrane Synthetic single ply preformed Waterproofing Membrane in black colour to be required to be laid all around the walls of UGLB. Walls of the UGLB to be plastered with 15mm thick plaster. Membrane to be initially laid between DPC and DLC at the floor level also as shown in drawing. The thickness of synthetic membrane should be in range between 1.2mm to 1.5mm. The specification of the membrane are as per specified in PDF.
623
-
-
Hydrophobic Poreblocking Ingredient as specified in PDF , Hydrophobic Poreblocking Ingredient as specified in PDF
364
-
-
Store list for Electrical items for one Living Bunker , Store list for Electrical items for one Living Bunker as specified Appx B in PDF
7
-
-
Store list of Water supply and sanitary fitting for one Living Bunker , Store list of Water supply and sanitary fitting for one Living Bunker as specified Appx C in PDF
7
-
-
Store list of furniture items for one Living Bunker , Store list of furniture items for one Living Bunker as specified Appx D in PDF
7
-
-
Jelly filled Lightning Conductor with complete specificatio , Jelly filled Lightning Conductor with complete specification as per PDF attached
7
-
-
Heating Device Kerosene Based , Heating Device Kerosene Based complete as specified in PDF
7
-
-
Fire extinguisher 2 Kgs capacity. ABC MAP 90 , Fire extinguisher 2 Kgs capacity. ABC MAP 90 complete as specified in PDF.
14
-
-
ISMB size 150 x 75mm wt 15 Kgs per RM of 5.05m long , ISMB size 150 x 75mm wt at the rate of 15.00 Kgs per RM of 5.05m long shall be welded with 02 Nos x 5mm thick MS plate of size 250x75x5mm on both ends of ISMB and including MS plates shall have 02 Nos x 16mm dia predrilled holes per plate for fixing fdn bolts also including 04 Nos x 100mm long 16mm dia fdn bolts which shall be grouted with 150mm thick RCC roof band and conforming to relevant IS.
18
-
-
ISMB size 150 x 75mm weight 15 Kgs per RM of 5.60m long , ISMB size 150 x 75mm wt at the rate of 15.00 Kgs per RM of 5.60m long shall be welded with 02 Nos x 5mm thick MS plate of size 250x75x5mm on both ends of ISMB and including MS plates shall have 02 Nos x 16mm dia predrilled holes per plate for fixing fdn bolts also including 04 Nos x 100mm long 16mm dia fdn bolts which shall be grouted with 150mm thick RCC roof band and conforming to relevant IS.
9
-
-
ISMB size 75 x 40mm of 5.05m long , ISMCs size 75 x 40mm of 5.05 m long shall be welded with 02 Nos x 5mm thick MS plate of size 175x50x5mm on both ends of ISMC and MS plates shall have 02 Nos x 12mm dia predrilled holes per plate for fixing fdn bolts and including 04 Nos x 100mm long, 12mm dia fdn bolts which shall be grouted with 150mm thick PCC of ratio 1 2 4 of size 400x175x150mm over roof band and conforming to relevant IS
15
-
-
20 Nos x 12mm dia, 150mm long foundation bolt to welded with 150mm long MS angle of Size 50x50x6mm , 20 Nos x 12mm dia 150mm long foundation bolt to welded with 150mm long MS angle of Size 50x50x6mm at roof for fixing Rafter 12 Nos and at rear to fix purlin 8 Nos and conforming to relevant IS Total 20 Nos of Fdn bolts reqd fto weld with MS angle.
60
-
-
Steel Roofing Trough SRT of size 1700 x 613 x 180mm made out of 2mm thick hot rolled carbon steel confroming relevant IS complete , Steel Roofing Trough SRT of size 1700 x 613 x 180mm made out of 2mm thick hot rolled carbon steel confroming relevant IS complete with set of 14 Nos MS hexagonal nuts. Bolts and bitumen and steel washers 12 mm dia 40mm long and a spanner OJDE of size 20 to 22 per 10 Nos of SRT including applying two coats of synthetic enamel OG paint over a coat of red oxide primer. SRT shall not be less than 25.00 Kgs 5 percentage tolerance.
72
-
-
Steel Roofing Troughs SRTs of size 1270 mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel , Steel Roofing Troughs SRTs of size 1270 mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel conforming torelevant IS complete with set of 14 Nos MS hexagonal nut bolts and washers 12 mm dia 40mm long and a spanner OJDE of size 20 to 22 per 10 Nos SRTs including applying two coats of synthetic enamel OG paint over a coat of red oxide primer. SRT shall not be less than 18.68 Kgs, 5 percentage tolerance.
108
-
-
Pre cast RCC beams 110x110x1420mm minimum M 25 Grade. , Pre-cast RCC beams 110x110x1420mm minimum M-25 Grade. Four Nos 10mm dia TMT bars two each on top and bottom with 8mm dia MS bar stirrups spaced at 150mm cc will be provided as reinforcement complete all as per drg and also supply including 2 Nos MS flat for size 40mm x 6mm and 150mm long nut bolt arrangement as shown in the drawing. MS Flat strips of qty 130 Nos and 150mm long nut and bolts with washer of qty 260 Nos shall be provided with each PD by L1 Vendor. Steel Bar Make to be used ISI marked only.
453
-
-
Pre prefabricated Steel door confirming to IS 1038 of 1938 of size 900mm x1800mm. , Pre prefabricated Steel door confirming to IS 1038-1938 of size 900mm x1800mm. The door chowkhat frame made angle iron 50mm x 50mm x 6mm with 03 Nos holdfasts 150mm long each side of angle 35x35x5mm and shutter outer frame made of angle 35 x 35 x 5 mm covered with 2mm thick black carbon sheet welded or riveted on shutter frame work. Bracing 02 Nos x 1.22m long MS flat 50x6mm at braces in middle and 02 Nos diogonal bracing support to be provided made of MS FI 50x6mm at top & bottom door panels. 3 Nos 150mm butt hinges 2 Nos MS tower bolt 200mm long 01 at Top and 01 at bottom of shutter 2 Nos MS bow handle 125mm long two No MS sliding bolt 300mm long of 20mm dia plain round bar including all requisite iron mongery fittings with steel door. Applying two coat of synthetic enemal paint OG over one coat of red oxide primer before supply of door complete . All materials shall conforming to relevant IS
3
-
-
Steel window of size 1200mmx300mm , Steel window of size 1200mmx300mm shall be provided. The main frame work shall be MS angle of size 50 x 50 x 6mm and 02 Nos of shutters shall be made from 6mm thick MS plate. Whereas MS angle frame at top and bottom shall be split in to two rows to slide the shutters smoothly within MS angle. MS angle shall be split into rows by welded with two nos of MS flat of size 50x6mm one at mid and other at edge along the length of the angle. Two Nos of bow handles shall be provided for easy opening and shifting the shutters. Two Nos of 100mm long tower bolts shall be provided. Chain link mesh wire of dimension 50x50x3.6mm shall be fixed with the help of MS flat 50x6mm over the window frame by welded externally iIncluding of all iron mongery etc. Windows shall be painted with two coats of OG Synthetic enamel paint over one coat of red oxide primer.
12
-
-
0.60 mm thick PPGI sheet of size 4270 mm x 1000mm for roof at entrance , 0.60 mm thick PPGI sheet of size 4270 mm x 1000mm for roof at entrance.
9
-
-
Ply wood 10 mm thick as per requirement for flat surface for roof. , Ply wood 10 mm thick as per requirement for flat surface for roof.
99
-
-
3.00 M long rectangular hollow section of size 66x33x2.90 mm at raftrer of roof at entrance 16.02 kg per meter , 3.00 M long rectangular hollow section RHS of size 66x33x2.90 mm at raftrer of roof at entrance 16.02 kg per m
6
-
-
2.30M long Rectangular hollow section of Size 66 x 33 x 2.90mm at Purlin of roof at entrance 16.02 Kg per meter. , 2.30M long Rectangular hollow section RHS of Size 66 x 33 x 2.90mm at Purlin of roof at entrance 16.02 Kg per m. 03 Nos reqd at roof and 02 Nos reqd at rear of the entrance to fix PPGI sheets.
15
-
-
150mm long MS angle of size 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix PPGI sheets. , 150mm long MS angle of size 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix PPGI sheets. 10 Nos of holdfast 4 Nos at rear wall 6 Nos at roof.
30
-
-
Self taping screw 80mm , Self taping screw 80mm
3
-
-
Reinforcement Mild Steel TMT bars 12 mm dia conforming to relevant IS. , Reinforcement - Mild Steel TMT bars 12 mm dia conforming to relevant IS.
1152
-
-
Reinforcement Mild Steel TMT bars 10 mm dia conforming to relevant IS. , Reinforcement - Mild Steel TMT bars 10 mm dia conforming to relevant IS.
495
-
-
Reinforcement Mild Steel TMT bars 08 mm dia conforming to relevant IS. , Reinforcement - Mild Steel TMT bars 08 mm dia conforming to relevant IS.
711
-
-
MS binding wire Annealed not less than 0.9mm dia confirming to relevant IS. , MS binding wire Annealed not less than 0.9mm dia confirming to relevant IS.
105
-
-
Ply wood 4450mm x 300mm and 12mm thick for shuttering of RCC Plinth Beam. , Ply wood 4450mm x 300mm and 12mm thick for shuttering of RCC Plinth Beam.
36
-
-
Ply wood 4450mm x 150mm and 12mm thick for shuttering of RCC Roof band. , Ply wood 4450mm x 150mm and 12mm thick for shuttering of RCC Roof band.
126
-
-
Ply wood 1500M X 200mm and 12mm thick for form work for Lintels and opening of doors or windows. , Ply wood 1500M X 200mm and 12mm thick for form work for Lintels and opening of doors or windows.
72
-
-
Natural sand confirming to IS 383 1970 , Natural sand confirming to IS 383 of 1970 Specifications for coarse and fine aggregates. Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete.
21
-
-
Manufactured sand confirming to IS 383 2016 , Manufactured sand M Sand confirming to IS 383 of 2016 Specifications for coarse and fine aggregates. Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete.
90
-
-
Aggregate 20mm , Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded confirming to relevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out
36
-
-
Aggregate 40mm , Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded confirming torelevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out.
57
-
-
Load bearing concrete PCC Soild Blocks of size 400mm x 200 mm x 200 mm , Load bearing concrete PCC Soild Blocks of size 400mm x 200 mm x 200 mm using plain cement concrete of ratio 1 3 6 type C1 16mm graded stone aggregate solid block shall be sound free from cracks broken edges honey combing and other defects that would interere with the the proper placing of blocks or impair the the strength or performance of construction and have a compressive strength of M15.
13032
-
-
Common building burnt clay bricks sub class B of size 23cm x 11.5cm x 7.5cm with sharp corners , Common building burnt clay bricks sub class B of size 23cm x 11.5cm x 7.5cm with sharp corners free from organic materials hard and well burnt with uniform size free from flows and cracks confirming to IS 1077 of 1986 fourth revision. Designation 75 Kgf per Sqcm.
5166
-
-
HDPE Sand Bag of size 75x40 cm , HDPE Sand Bag of size 75x40 cm Sand colour and each bag having weight not less than 60 gms.
1422
-
-
PBS Roll Self finished tarfelt hessian base for water proofing Grade 1 conforming torelevant IS of size 20m x 0.90m , PBS Roll Self finished tarfelt hessian base for water proofing Grade1 conforming torelevant IS of size 20m x 0.90m weight of each roll shall not be less than 42.50 Kgs plus 2.5 Kgs in dry conditions. The finished mtrl shall be free from visible external defect such as holes oil patches ragged or untrue edges brakes cracks tears protuberances and indentations.
21
-
-
Synthetic Enamel Paint colur OG or Chocolate , Synthetic enamel paint colour OG pr Chocolate 1st quality conforming to IS 20174 of 1979
45
-
-
Quick setting compound , Quick setting compound Rapidite Make Acclerex or Cico or Fosroc.
462
-
-
Integral Water Proofing Compound , Integral Water Proofing Compound as per approved sample and make and IS 4645 of 1975. Make Pidilite Dr fixit
105
-
-
Silicone gel sealant of 01 pack of 400 gms including applicator gun. , Silicone gel sealant of 01 pack of 400 gms including applicator gun.
36
-
-
HDPE sheet having weight 100gm per sqm BLACK of width 5.5m. , HDPE sheet having weight 100gm per sqm BLACK of width 5.5m.
393
-
-
Thinner , Thinner Make Asian or Berge or Shalimar.
9
-
-
Cement base paint , Cement base paint. Make Duracem Snowcem and British xtracem
15
-
-
Prefeb welded Ventilator lintel made out of 02 Nos ISMC 200x75mm , Prefeb welded Ventilator lintel made out of 02 Nos ISMC 200x75mm Weight at the rate of 22.30 Kgs per RM of 1000mm length will be provided over door Window Loop Hole including jointing the two channel with proper nuts and bots system and including welding work complete including one coat of red oxide primer. Steel shall conform to IS 800.
15
-
-
Prefeb welded Window lintel made out of 02 Nos ISMC 200x75mm , Prefeb welded Window lintel made out of 02 Nos ISMC 200x75mm Weight at the rate of 22.30 Kgs per RM of 1500mm length will be provided over door Window Loop Hole including jointing the two channel with proper nuts & bots system and including welding work complete including one coat of red oxide primer. Steel shall conform to IS 800.
12
-
-
False ceiling made of 40 mm thick PUF insulated panel with 0.63 mm thick , False ceiling made of 40 mm thick PUF insulated panel with 0.63 mm thick hot dipped galvanised steel sheet on both side supported with held of inverted Tee Sec 50X50X50 mm thick and L Sec of 50mmX50mmX5mm thick fixed to truss complete frame work as directed by buyer.
57
-
-
Wall panelling with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm , Wall panelling with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm and length of 2.74 or 3.05 9 feet x10 feet meters of D SPAZE or equivalent brand. Wt of PVC pannel is 4.5Kg per Sqm and PVC percentage in wall panels is more than 40 percentage wall panel are fire and termite proof and water proof wall panels are useable on the damp walls scantling of size 11 per 2inch x 2 inch for frame work including supply of sufficient qty of nails and L H U profile and corner profile with wooden fillets etc complete.
138
-
-
Supply of 1st quality non-skid coloured ceramic floor tiles fo size 300mmx300mm x7 to 8 mm thick Square , Supply of 1st quality non-skid coloured ceramic floor tiles fo size 300mmx300mm x7 to 8 mm thick Square Complete all as specified and directed
417
-
-
Supply of glazed ceramic coloured design wall tiles of size 450x300x7 to 8mm thick , Supply of glazed ceramic coloured design wall tiles of size 450x300x7 to 8mm thick for vertical surface complete all as specified and directed .
867
-
-
MS Stand with each Living Bunker for water tanks 1000 ltr capacity shall be fabricated from MS angle 50 x 50 x 6 mm size 4.50 Kg per Rm for vertical legs , MS Stand with each Living Bunker for water tanks 1000 ltr capacity shall be fabricated from MS angle 50 x 50 x 6 mm 4.50 Kg per Rm size for vertical legs flat iron 40 x 8 mm 2.51 Kg per Rm for vertical legs bracings top frame of angle iron 40 x 40 x 6 mm 3.50 Kg per Rm with MS sheet of 14 gauge thickness 15.70 Kg per Sqm fixed on top all as per drg attached as Appx H and all angle iron used in MS Stand shall be conforming to IS 808 Part V of 1976. Four angles at each corners at top of size 50X50X6mm br provided vertically up height of each angle be 300mm. The mild steel stand will be provided with two coats of green paint over a coat of red oxide primer.
3
-
-
Supply factory made solid PVC moulded door D1 shutter 28 to 30mm thick stiles of size od 0.8mm x 2.05mm , Supply factory made solid PVC moulded door D1 shutter 28 to 30mm thick stiles of size od 0.8mm x 2.05mm with 2 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face with wood free EPS including solid PVC door frame of size of opening 0.90x2.10mm made of 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube with Stainless steel hardware i.e butt higes 100mm size 03 Nos barrel tower 150mm long 02 Nos sliding door bolts 250mm size 01 Nos and handle 150mm size 02 Nos complete.
9
-
-
Ventilator made of aluminium section 2.00mm thick shall be provided in one set of Each WC or Bath. Size of ventilator shall be 450mm x 600mm. , Ventilator V made of aluminium section 2.00mm thick shall be provided in one set of Each WC Bath. Size of ventilator shall be 450mm x 600mm. All ventilators shall have double polycarbonate 4 mm thick glazed shutter. When closed these shall be airtight and water proof. Suitable locking arrangement will be provided. The ventilator shall have single shutter made up of F7 Z Section. The shutter shall be top hung and shall be fixed to the frame with hinges of suitable size. The shutter opening inwards shall have polycarbonate transparent sheet fixed. The ventilator provided should be such that exhaust fan can be fixed easily from outside.
9
-
-
Aggregate 63mm. Stone Aggregate to be crushed rock or gravel 63mm graded confirming to relevant IS , Aggregate 63mm. Stone Aggregate to be crushed rock or gravel 63mm graded confirming to relevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out.
9
-
-
01x Soakage pit cover made of 1mm thick MS sheet of size1.90mx1.90m suitably welded with 50x50x6mm thick , 01x Soakage pit cover made of 1mm thick MS sheet of size1.90mx1.90m suitably welded with 50x50x6mm thick MS angle iron along the corners and diagonally shall be provided as shown in drawing. MS sheet will be welded with the help of MS Flat Iron 40x3mm thick on all sides and at the centre joint of the MS plate. Four Nos of lifting handle made of MS round bar shall be provided with each cover. One No of openable MS Hinged cover for inspection of size 600x400mm made of 1mm thick MS sheet frame with MS angle Iron 30x30x6mm and lifting handle with 5mm dia MS round bar complete as shown in the drawing attached. The cover shall be applied two coats of first quality synthetic enamel paint of sand color over two coats of red oxide primer after preparation of surfaces.
3
-
-
Rubber Membrane for water proofing. Ethylene Prolylene Diene Monomer Waterproofing Membrane , Rubber Membrane for water proofing. Ethylene Prolylene Diene Monomer Waterproofing Membrane Synthetic single ply preformed Waterproofing Membrane in black colour to be required to be laid all around the walls of UGLB. Walls of the UGLB to be plastered with 15mm thick plaster. Membrane to be initially laid between DPC and DLC at the floor level also as shown in drawing. The thickness of synthetic membrane should be in range between 1.2mm to 1.5mm. The specification of the membrane are as per specified in PDF.
267
-
-
Hydrophobic Poreblocking Ingredient as specified in PDF , Hydrophobic Poreblocking Ingredient as specified in PDF
156
-
-
Store list for Electrical items for one Living Bunker , Store list for Electrical items for one Living Bunker as specified Appx B in PDF
3
-
-
Store list of Water supply and sanitary fitting for one Living Bunker , Store list of Water supply and sanitary fitting for one Living Bunker as specified Appx C in PDF
3
-
-
Store list of furniture items for one Living Bunker , Store list of furniture items for one Living Bunker as specified Appx D in PDF
3
-
-
Jelly filled Lightning Conductor with complete specificatio , Jelly filled Lightning Conductor with complete specification as per PDF attached
3
-
-
Heating Device Kerosene Based , Heating Device Kerosene Based complete as specified in PDF
3
-
-
Fire extinguisher 2 Kgs capacity. ABC MAP 90 , Fire extinguisher 2 Kgs capacity. ABC MAP 90 complete as specified in PDF.
6
-
-
List of Tools for Living Bunker , List of Tools for Living Bunker
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements