Housing And Urban Development Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Housing And Urban Development Department - HAUDD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Jul 2024
Closing DateCancelled
Tender Amount₹ 12,70,00,000
Costs
EMD
₹ 25,40,000Document Cost
₹ 11,000Tender Fee
Refer Documents
Summary
Construction Of School Of Architecture At Gcet Safapora Ganderbal
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HAUDD_253667_1Tender No
E-NIT No. 02 of 2024-25 Dated 19-07-2024Tender Authority
Housing And Urban Development Department ViewPurchaser Address
-Website
http://http://jkhudd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying of hand packed stone boulder before laying of mud mat compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.
61.65
58567
950
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
116.48
606033
5202.9
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
377.67
2941445
7788.4
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,
finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
567.5
5573899
9821.85
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work,using cement content as per approved design mix,incluyding pumping of concrete to site laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportiond as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable seperately all works Below Plinth Levl / Above Plinth Level upto level V
-
-
-
BELOW PLINTH
20.88
162621
7788.4
ABOVE PLINTH
105.52
991434
9395.7
Form work of steel plates not less than 3.0mm thick M.S. sheets of specified size stiffened with suitable structural frame work true to plane or Kit-ply plates of not less than 12mm thickness of specified sizes stiffened with a suitable timber frame work prop height up to desired height in foundation, plinth beams, all types of suspended floors, soffits of slabs, sloping areas, sides and soffits of beams ribs, columns posts, pedestals, up to desired heights and thickness complete including its removal for all RCC works from foundation to roof level.
1162
332738
286.35
BEAMS
1877.79
1084517
577.55
COLUMNS
481.93
357857
742.55
SLAB
3050
2190510
718.2
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
61.65
353476
5733.6
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto levels Thermo-Mechanically Treated bars of grade Fe-500D or more.
153632
18927462
123.2
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
112500
15547500
138.2
P/F of 16 mm dia holding down anchor bolts 450 mm long along with nuts for holding of steel trusses / frames in roof of the building.
831
91410
110
Supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete
797.21
87693
110
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
1316
1036218
787.4
Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 :6 (1 cement : 6 coarse sand)
1307.19
12035298
9207
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for half Brick masonry in superstructure above plinth level upto floor V level.Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
123.61
152163
1231
15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) (including cost of all material, leads, lifts and carriages etc upto site of work complete).
10872.5
3336226
306.85
6 mm thick cement plaster on ceilings, soffits etc. in (1 cement: 4 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete).
4756.6
1147529
241.25
Providing and fixing wood work in frames of doors, windows and other frames, wrought framed and fixed in position including SS expansion fastners for brick / concrete work in (including cost of all material, leads, lifts and carriages etc upto site of work complete Ist class Deodar wood ) as per the directions of EIC/as per the drawings
5.47
595648
108893.75
Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part I) decorative type, core of block board construction with frame of 1st classhard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick
148.35
479793
3234.2
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)
148.35
59547
401.4
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
150
24457
163.05
Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications .
-
-
-
Modular door lock ss finish handle 10" with dual locking system inside & outside (godrej)
43
64500
1500
Tower bolts 150mm (doors)
150
5250
35
Handle 125mm (door)
155
5890
38
Painting with synthetic enamel paint of approved brand and manufacture including applying priming coat with ready mix pink of approved brand and manufacture on wood work etc. including cost and carriage of all materials equipments complete job as per drawings, specifications and as directed by the engineer Incharge.
752.56
99225
131.85
With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
752.56
48615
64.6
Providing and fixing of U-PVC sliding/casement/fix window in white colour,frame 60mm thick (min) x 45mm (min) with 1.5 mm GI reinforcement sash 39mm (min) 58mm (min) with 1.25mm GI U section reinforcement with rubber gasket of grey / black colour 10 years warranty against weathering of profile with complete hardware fittings and with 5mm thick toughened glass and fiber jalli option pre- febricated on german fabrication system( mosquito sash 18mm(min) x 43mm(min)(with welled cornes) complete at site (for glazing/wire guage shutters)
632.3
6683948
10570.85
Providing and supplying Armstrong ‘Optra Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class B-s1, d1 as per EN13501, fabric with an option of colors – Ivory, Autumn Orange, Pista Green, Straw Gold, Rustic Green, Burgundy, Rust, Peacock Blue, Ash Grey, Mocha as per the choice of the Architect of size 600X1200 mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer. INSTALLATION:4nos. Armstrong wall panel Impalers of shall be fixed to the wall surface using self tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Armstrong Optra wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained.
113.75
420875
3700
Proving and fixing of 24 mm thick rubber wood board for wall penelling designed in ornamental pannals shape square / rectangular. Including cost of necessary adhesive ,budloo wood backing and cost of nails etc specification and design approved by engineer in charge/consultants.complete job.
28.25
136871
4845
Proving and fixing of wall paper on walls . Including cost of necessary adhesive specification and design approved by engineer incharge/consultants/client.complete job
56.5
36725
650
Providing and applying cement based wall putty of required thickness over plastered surface to prepare the surface even and smooth complete in specified areas as per specified patter. Approved make) (including cost of all material, leads, lifts and carriages etc upto site of work complete).
11726.9
2123155
181.05
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
9893.3
1352908
136.75
Providing and fixing ( gang saw cut mirror polished (flamed , pre-moulded and pre-polished), machine cut for flooring, steps ,risers of stairs etc.( flamed instaircase) of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape 18mm thick. and slab area over 0.50 sq m. (Note: The Granite stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc. upto site of work complete 16MM
878.95
3999530
4550.35
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)
including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
2952
4118335
1395.1
Providing and fixing ist quality ceramic glazed tiles in floors ( thickness to be specified by the manufactures) confirming to IS: 13753 of approved make like NITCO, Orient, Somany, Kajaria or equivalent make of specified shades except Burgundy bottle green black of any size as approved by consultant over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kgs per Sq.m including pointing in white cement mixed with pigment of matching shade complete (300mm x300 mm )
245.5
271535
1106.05
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc upto site of work complete).
599.16
736427
1229.1
Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)
202.02
382171
1891.75
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,by applying cemnet slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement@ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement compound @ 0.126 kg/sqm. This layer will be allowed t air cure for 4 hours followed with water curing of 48 hours. The rate includes preparation of surface, treatment and sealingof all joints ,ciorners, juntions of pipes and masonry with polymer mixed slurry.
844.14
409492
485.1
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.(Crushed)
378.62
216873
572.8
Providing/fixing of Khatambandi Ceiling of ist Class Budloo Wood of specified pattern in ceilings etc. including, necessary frame work work of 50 mmx 75mm size ,and 12mm thick ply board frame in lining of Budloo wood underneath and other incidentals including cornice of size 75mmx75mm/2 of Budloo Wood all complete in all respectes.as per the directions of EIC/as per the drawings
429.28
1931760
4500
French spirit polishing, Two or more coats on new works including a coat of wood filler
609.3
232051
380.85
Providing and fixing plannes eaves boarding (300mm x 40mm )( nominal size) second class dewdare wood fixed with screws etc, including all carraiges .All job completed
228.66
332357
1453.5
Providing and fixing 20mm thick wooden planks ceiling/ soffit(frame work for base to be paid for separately) with M.S. screws 2nd class kail wood
371.75
645878
1737.4
Providing colour coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm thick INCL ridges & valleys. Complete Job
3229.8
4844700
1500
Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top
most ceiling of building. 12.50.1 With resin bonded fiber glass wool with density 24 kg/cum
3229.8
1959519
606.7
Providing and fixing 3.5mm thick panels of plain glass for fixed glazing panels/ shutters (only panel area to be measured) including cost of teak wood beadings of required size complete
48.61
43749
900
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position
7.48
303010
40509.4
Providing and fixing Antiskid Vitrified pavement tiles 300x300x10mm thick laid on 20mm thick cement mortar 1:4 1 cement: 4 coarse sand] and jointing with Tile Grout as per approved colour complete as directed by Engineer-in-charge
66.91
120438
1800
Provding & fixing 230X75 X20 mm thick exterior pioneer brick tiles having grooves more than 2mm. The tile should be silicon coated on front side of tile only to depth 5mm. The clay should be tunnel fired at over 1100 degree celsius. Compressive strenght 500kg/cm, water absorbtion 7% , colour natural shade etc cement mortar 1:3 inclusive of all materials carriage lead and lifts etc specifications/selection done by EIC including carriage.Complete job
1854
5747400
3100
Finishing walls with textured exterior paint of required shade On Newwork (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @2.20kg/10sqm
1769.05
474901
268.45
Providing and fixing devri stone clading 25 mm thick with exposed face fine dressed with rough backing on wall lining etc. upto 10 meter ht back filled with a grout of 12 mm thick cement sand mortar in 1:3 (fine cheiseled)including pointing in white cement 1:2 with admixture of pigment matching to stone
380.3
988780
2600
Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/Salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. Complete and fixing stainless steel balusters upto 900 mm height and S S tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws ,etc. in floors and treads including providing SS shoe at each balusters complete as per architectural drawings and as per the directions of engineer incharge including cutting of granite/marble floors and fastening with lead grouting if required, complete in all respects.
96.22
317526
3300
Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/Salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws ,etc. in walls complete as per architectural drawings and as per the directions of engineer incharge including fastening with lead grouting if required, complete in all
153.66
92196
600
Providing & fixing of stainless steel nevel post (Ornamental ) including top ball of AISI 304 grade of required height duley anchored to floor with dash fasteners . Height of the nevel post shall not be less than 1050 mm above the finished skirting level all complete as per architectural drawings (including cost of all material, leads, lifts and carriages etc upto site of work complete).Complete as per the directions of Engineer incharge.
15
20250
1350
Providing and applying ornamental molded cementing plaster vertical post with mix of 1 cement and 1 fine sand(1 :1 mix ) including material scuffolding shuttering etc complete job as per architectural drawing/ and approved by EIC
6
90000
15000
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
232.34
216041
929.85
Providing and fixing Flotex carpet sheet/roll 4.3mm thick cut pile floor covering, pile material 100% nylon 6.6 having resilient water proof backing material and total weight of carpet should be 1.8 Kg/sqm and anti sound absortion of 0.10 of Consolidated Carpet make or approved equivalent make and shade in flooring and skirting in approved pattern on a smooth top and damp proof base using adhesive of approved quality and manufacture including rolling with light wooden roller and the cost of levelling the surface with self levelling adhessive etc. all complete as per manufacturer's specification.
62.83
157075
2500
Supply and installation signage plates for rooms.meeting halls etc of size 120mm x120mm x1.5mm in ss304 matt finish having letters engrave in the ss plate in black vinyl steam pressed to get a clean finish and having font size of name atleast 30mm fixed on the wall or door surface with high quality adhesive tape of 3M or equivalent complete to thesatisfaction of engineer in charge
40
37030
925.75
Providing and fixing of expansion joint system related with floor location as per drawingsand direction of Engineer-In-Charge. The joints system will be of extruded aluminum basemembers, self aligning / self centering arrangement and support plates etc. as per ASTMB221-02. The system shall be such that it provides floor to floor /floor to wall expansion
control system for various vertical location in load application areas that accommodatesmulti directional seismic movement without stress to its components. System shall consistof metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self centering arrangement that freely rotates / moves in all directions. The Self –centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum
extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and asapproved by Engineer-in-Charge. (Material shall confirm to ASTM 6063.)
24.39
164673
6751.7
Providing and fixing of expansion joint system related with wall joint (internal/ external)location as per drawings and direction of Engineer-In-Charge. The joints shall be ofextruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joints
System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the
multi-cellular to facilitate movement. (Material shall confirm to ASTM 6063.)
33.54
198833
5928.25
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
16
90118
5632.4
Providing and fixing Under Counter wash basin,with 32 mm Waste Coupling and other allied accessories including cutting and making good the walls wherever required
White Vitreous China Under Counter Wash basin.
30
148500
4950
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
8
43946
5493.25
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass,
including painting of fittings and cutting and making good the walls and floors wherever required
-
-
-
Range of two half stall urinals with 5 litre P.V.C.
automatic flushing cistern
2
30224
15112.35
Range of three half stall urinals with 10 litre P.V.C.
automatic flushing cistern
4
74185
18546.45
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required Size 600x450x200 mm
6
36839
6139.85
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved
make and shade with 6 mm thick hard board backing
Rectangular shape 1500x450 mm
30
61450
2048.35
Providing and fixing toilet paper holder with Flap made out of C.P Brass
16
16188
1011.75
Providing and fixing C.P Brass Soap Dish.
36
27000
750
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge
16
6593
412.1
Providing and fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws
10
18900
1890
Providing and fixing C.P brass bib cock with Auto closing System with Built in control Cock with Wall Flange of approved quality 15 mm nominal bore
24
94920
3955
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore
144
72050
500.35
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
52
45221
869.65
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
36
245008
6805.8
Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing.
-
-
-
110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B
270
167400
620
75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B
240
108000
450
Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required
70
40250
575
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge
Concealed work, including cutting chases and making good the walls etc.
-
-
-
1620 (20 mm OD) pipe
160
82512
515.7
2025 (25 mm OD) pipe
100
63280
632.8
3240 (40 mm OD) pipe
90
87750
975
4050 (50 mm OD) pipe
40
44000
1100
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge
Internal work (Exposed on wall)
-
-
-
2025 (25 mm OD) pipe
70
29750
425
3240 (40 mm OD) pipe
70
52493
749.9
4050 (50 mm OD) pipe
40
35564
889.1
5065 (65 mm OD) pipe
15
15750
1050
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.
External work 4050 (50 mm OD ) pipe
100
76550
765.5
Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length
144
17107
118.8
Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S.(non modular) bricks
100
36360
363.6
Providing and Fixing of Thermal Insulation for Hot Water Lines made out of Flexible Elastomeric Foam of Closed Cells Structure Having a Thermal Conductivity of 0.038 W/m.K at 200 Deg C water Vapour Permeability of Cu.m 5000 as Required including accessories i.e Adhesives/Tape on all Joints as per the satisfaction of the Engineers Incharge.
-
-
-
1620 (20 mm OD) pipe
160
22400
140
2025 (25 mm OD) pipe
170
28050
165
3240 (40 mm OD) pipe
160
32800
205
4050 (50 mm OD) pipe
80
18800
235
5065 (65 mm OD) pipe
15
6375
425
Constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment:5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With F.P Bricks.
22
233261
10602.8
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
150
74025
493.5
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m
100
21840
218.4
Providing and filling sand of grading zone V or coarser grade all-round the Composite Pipes in external work & lay dry brick over sand layer to protect the pipe.
4050 (50 mm OD ) pipe
100
24500
245
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of P.V.C pipes including bed concrete as per standard design
-
-
-
110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B
270
159300
590
75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B
240
93600
390
Supply, Installation of PVC Gully Trap of Size 110 mm Makes:-Astral/SFMC/Finolex
7
12250
1750
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
2
47631
23815.8
Constructing septic tank, of size 6.0 mx 2.0 mx1.80 m approx. height(Height to be fixed as per site requirement i.e. below invert level of last manhole , in B/W, 350/230 mm thick ( minimum) walls .
2
250000
125000
Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 16 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.
-
-
-
65 mm Diameter
1
4250
4250
50 mm Diameter
7
20300
2900
40 mm Diameter
12
28200
2350
25 mm Diameter
22
14960
680
Providing and fixing on wall 35 LTRS Electric Geyser with ABS Body.
8
108000
13500
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
8000
77600
9.7
Supply,Installation,Testing and Commissioning of Open Well Submersible Pump(1 W ) with a Discharge of 7 Cu.m/hr @Head of 30 Meters Complete with all accessories including header Pipes, allied materials and automatic Control Panel.
1
85700
85700
Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.
1947.21
297923
153
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm)
95.02
178666
1880.3
Supplying and stacking at site.Graded crushed stone aggregate of size 63 mm to 45 mm.
148.47
178780
1204.15
Supplying and stacking at site.Graded crushed stone aggregate of size 53 mm to 22.4 mm.
148.47
178780
1204.15
Supplying and stacking at site. Stone screening of size 11.2 mm nominal size. (Type B).
47.51
57209
1204.15
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
296.94
228094
768.15
Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm.
1947.21
144775
74.35
Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.50 Kg/sqm.
1947.21
107485
55.2
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
95.02
816312
8590.95
Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. Plant of 100-120 TPH capacity
1947.21
570727
293.1
Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.
1947.21
197447
101.4
Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)
1978.46
543779
274.85
Spreading of good earth in required thickness as per directions of officer in-charge (cost of good earth to be paid separately)
1978.46
95955
48.5
Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction
6486.99
113652
17.52
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads & lifts
6486.99
390776
60.24
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement
404.28
536418
1326.85
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
20.47
175294
8563.5
Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed medium class PVC
conduit, with modular switch, modular plate, suitable GI box
and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.GRoup c
757
1110519
1467
Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor single core cable in surface/Recessed medium class PVC Conduit along with 1 No. 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.
1700
567800
334
Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor,single core Cable in surface/Recessed medium class PVC conduit as required.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1900
522500
275
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
250
251250
1005
4 X 16.0 SQ.MM + 2 X 6.0 SQ.MM Earth Wire
250
341250
1365
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
260
139620
537
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).(ANCHOR/LEGRAND/SCHINIDER)
42
8610
205
Supplying and Fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required
-
-
-
5/6 amps switch
3
309
103
3 Pin 5/6 amp socket outlet
3
591
197
Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required
125
5000
40
Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.
61
35746
586
Supplying and fixing two module stepped type electronic fan
regulator on the existing modular plate switch box including
connections but excluding modular plate etc. as required.
143
52767
369
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
4
4676
1169
Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isolator) LEGRAND/HAVELL/SSK
-
-
-
4 way (4 + 12), Double door
4
16364
4091
6 way (4 + 18), Double door
2
9948
4974
8 way (4 + 24), Double door
3
17901
5967
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
16 way, Double door
6
18846
3141
12 way, Double door
2
4630
2315
Supplying and fixing following rating, four pole, 415 V, isolator
in the existing MCB DB complete with connections, testing and commissioning etc. as required. .(ABB/LEGRAND/SCHINIDER)
-
-
-
16 A DP MCB 10 Ka C curve
8
7600
950
32 A DP MCB 10 Ka C curve
12
11400
950
40 A DP MCB 10 Ka C curve
9
9858
1095.41
63 A DP MCB 10 Ka C curve
6
9081
1513.65
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 AF.P MCB 10 Ka C curve
3
6265
2088.38
32 AF.P MCB 10 Ka C curve
4
8154
2038.59
63 AF.P MCB 10 Ka C curve
2
5772
2886.47
Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
163
41728
256
Supply and Fixing Single Pole Blanking Plate in the Existing MCB DB complete as Required.Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance value.
46
1840
40
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia
including accessories, and providing masonry enclosure with
cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Earth pit chamber (300mm x 300mm) with CI cover for the above.
4
27420
6855
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre
below ground as strip earth electrode, including connection/
terminating with G.I. nut, bolt, spring, washer etc. as required.
(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
60
8640
144
Supply installation testing and commissioning of IP:20 Aluminium Batten 40 W +- 1 W LED Surface Mounted 4 ft. with system lumen efficacy of 100 lm/W and P.F 0.9 THD 20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab.
Marvell/Philips/Wipro
504
387177
768.21
Supply installation testing and commissioning of IP20 led downlighter 15 W-18 W +/- 1 W LED Surface downlighter round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
78
110962
1422.6
SITC of pre-wired Surface Mounted LED Ceiling Light 24 W with Minimum 100 Lm/Watt Efficacy made out of Pressure die cast Aluminium Housing for effective Thermal Management and High Transmission Factor including connections with 1.5 sq.mm FR PVC insulated copper conductor single core cable and earthing etc as required.
12
30000
2500
Supply installation testing and commissioning of Ceiling Fan 3 Star Rated with Voltage Range 90 V to 300 V,Min. Air Delivery 212 CMM,Service Value 5.3 Cu.m/min/watt,Aluminium Blades ,including wiring the down rods of standard length(Upto 45 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required.
Crompton/Harvell/Usha
143
315529
2206.5
Supply,Installation,Testing and Commissioning 486 Cu.m/Hr. AC 220-240 Volts, 50 Hz exhaust fan made out of Metal Body with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required .300 mm
20
45000
2250
Supplying,Installation,Testing and Commissioning of Cubical Type Main Distribution Panel Board -1 Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars,Interlocking ,Synchronising etc. as required as per the Following Description.(IP:42)The L.T Panel Should be as per IEC:-61439 -1&2 Zone V Compliant.(Block-A)
8
17600
2200
INCOMER
-
-
-
Adj. TMR Based MCCB 100 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos)
1
10602
10602
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(150 Amps ) and MCB Strip of suitable size as Required.
1
7500
7500
OUTGOINGS
-
-
-
Adj. TMR Based MCCB 63 Amps FP Icu=Ics=100%Breaking Capacity 36 KA with Extendable ROH (03 Nos)
3
31806
10602
Adj. TMR Based MCCB 40 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
2
21580
10790
Adj. TMR Based MCCB 25 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (03 Nos)
3
32370
10790
D.P M.C.B 63 A 10 KA(02 Nos)
2
3027
1513.65
Load Bearing Members to be made out of 2.0 mm CRCA Sheet. Partitions to be made out of 1.6 mm CRCA Sheet Gland Plates to be 3.0 mm Thick.
-
-
-
Supplying,Installation,Testing and Commissioning of Cubical Type Main Distribution Panel Board -2 Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars,Interlocking ,Synchronising etc. as required as per the Following Description.(IP:42)The L.T Panel Should be as per IEC:-61439 -1&2 Zone V Compliant.(Block-B)
8
17600
2200
INCOMER
-
-
-
Adj. TMR Based MCCB 100 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos)
LEGRAND/ABB
1
6500
6500
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(150 Amps ) and MCB Strip of suitable size as Required.
1
4500
4500
OUTGOINGS
-
-
-
Adj. TMR Based MCCB 40 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (05 Nos)
5
22500
4500
Adj. TMR Based MCCB 25 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (05 Nos)
5
22500
4500
Load Bearing Members to be made out of 2.0 mm CRCA Sheet. Partitions to be made out of 1.6 mm CRCA Sheet Gland Plates to be 3.0 mm Thick.
-
-
-
Supplying,Installation,Testing and Commissioning of Cubical Type Main Distribution Panel Board -3 Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars,Interlocking ,Synchronising etc. as required as per the Following Description.(IP:42)The L.T Panel Should be as per IEC:-61439 -1&2 Zone V Compliant.(Block-C)
8
17600
2200
INCOMER
-
-
-
Adj. TMR Based MCCB 100 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos) LEGRAND/ABB/L&T
1
6500
6500
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(150 Amps ) and MCB Strip of suitable size as Required.
1
7500
7500
OUTGOINGS
-
-
-
Adj. TMR Based MCCB 63 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (03 Nos)
3
13500
4500
Adj. TMR Based MCCB 25 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (03 Nos)
3
13500
4500
D.P M.C.B 63 A 10 KA(02 Nos)
2
3027
1513.65
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.Partitions to be made out of 1.6 mm CRCA Sheet Gland Plates to be 3.0 mm Thick.
-
-
-
Supplying,Installation,Testing and Commissioning of Cubical Type Main L.T Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars,Interlocking ,Synchronising etc. as required as per the Following Description.(IP:55)The L.T Panel Should be as per IEC:-61439 -1&2 Zone V Compliant.
14
30800
2200
INCOMER
-
-
-
Adj. TMR Based MCCB 400 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
2
38088
19044
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(250 Amps ) and MCB Strip of suitable size as Required.
1
12500
12500
Motorised Changeover 400 A F.P with Aux-C Controller(01 Nos)
1
45000
45000
OUTGOINGS
-
-
-
Adj. TMR Based MCCB 100 Amps FP Icu=Ics=100%Breaking Capacity 36 KA with Extendable ROH (05 Nos)
5
53010
10602
Adj. TMR Based MCCB 63 Amps FP Icu=Ics=100%Breaking Capacity 36 KA with Extendable ROH (03 Nos)
3
31806
10602
D.P M.C.B 63 A 10 KA(02 Nos)
2
3027
1513.65
Load Bearing Members to be made out of 2.0 mm CRCA Sheet. Partitions to be made out of 1.6 mm CRCA Sheet Gland Plates to be 3.0 mm Thick.
-
-
-
Design, fabrication, assembling, wiring, supply, installation,
testing and commissioning of Automatic control panels with Normal Duty capacitors, fabricated out of 14 gauge CRCA sheet steel in cubicle compartmentised, free standing, floor mounted, dust and vermin proof with reinforcement of suitable size, angle iron, channel, `T’ sections and / or flats wherever necessary. Cable gland plates shall be provided on top the panels. Panels shall be treated with all anticorrosive process before powder coating as per specificationsand final approved shade. 2 No. earthing terminals shall be provided for all distrtibution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication.Galvanised hardwares with zinc passivation shall be used in fabrication of panels.Capacitor Panel.The L.T Panel Should be as per IEC:-61439 -1&2 Zone V Compliant.(IP-55)
8
17600
2200
INCOMER
-
-
-
Adj. TMR Based MCCB 100 Amps 4 P with Breaking Capacity 36 KA(Icu=Ics=100%)(1 Nos)
1
6500
6500
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(150 Amps ) and MCB Strip of suitable size as Required.
1
4500
4500
OUTGOINGS
-
-
-
Adj. TMR Based MCCB 16 Amps 3 P with Breaking Capacity 36 KA(Icu=Ics=100%)(04 Nos)
4
26000
6500
Capacitor Duty Contactor 12.5 A (03 Nos)
3
6090
2030
Capacitor Duty Contactor 5 A (01 Nos)
1
1651
1651
Capacitor 10 KVAR S.D 440 V (03 Nos)
3
11619
3873
Capacitor 5 KVAR S.D 440 V (01 Nos)
1
1936
1936
APFCR 05 Stages
1
12206
12206
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.Partitions to be made out of 1.6 mm CRCA Sheet Gland Plates to be 3.0 mm Thick.
-
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.200 mm dia (OD-200 mm & ID-175 mm nominal)
50
33400
668
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required. 3.5 C X 50 Sq.mm A2XFY
10
5454
545.43
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet)
3½ X 50 sq. mm (35mm)
2
826
413
Supply, transportation,Unloading , installation,testing & Commissioning of the following rating of UPS System(IGBT Based) including unloading,transportation from store to site ,errection instlattion,testing of UPS System including Battery and Battery rack errection & Installation under the supervision of supplier of UPS. Note:- Contractor has to submit the drawings & battery selection detail before procurement. Specification of UPS system shall be provided with Static by pass and Maintenance by pass facility with distribution board .
10KVA UPS , Input 1 Phase 3 wire and output 1 phase 3 wire with 15 min. Back up
1
105000
105000
Providing, fixing supplying, termination & certification of CCTV/INTERNET/TELEPHONE networking . The item mentioned shall include the cost for laying Cat 6 UTP wire of in existing conduits for the wiring & it shall be such that each point has a dedicated single CAT 6 wire from the wall outlet to the patch panel.The rates quoted shall include the cost of termination of CAT6 cable in the wall sockets & patch panel including the cost of certification by network engineer using a penta-scanner , ferrulling of every point on both sides the contractor will have to provide the network certification in writing. Nothing extra shall be paid for on account of termination, crimping, certification etc. complete in all respects as desired by Engineer Incharge. The following items will be got exectued as under
-
-
-
Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required.
-
-
-
RJ 45 Socket
59
27278
462.35
Telephone socket outlet
12
1776
148
Supplying and Fixing of Following sizes of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required. 25mm PVC Conduit
1400
203000
145
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the
existing surface/ recessed Steel/ PVC conduit as required.
1 run of cable
13700
780900
57
Supplying and drawing following pair 0.5 mm dia FRLS PVC
insulated annealed copper conductor, unarmored telephone
cable in the existing surface/ recessed steel/ PVC conduit as
required. 2 Pair
200
7600
38
Supply, installation, testing and commissioning of Junction Boxes/DB-20 Pairs with Original Krone module and Back Mount Frame and have Lock -n- key, complete in all respect as per specification and desired by EIC
3
114
38
Supply, Installation, Testing and Commissioning of Semi managed 24 port POE , complete as per specification and as desired by EIC.
3
8427
2809
Supply & Erection of lockable 9/12 U rack with 5A strip and two fan for distribution, mounting of patch panels, hubs, switches etc,, complete as per specification and as desired by EIC.
9
81000
9000
Supply & Erection of CAT 6, 24 port Jack panel for termination of CAT6 cable,Testing & certification of the network with Omni/Penta Scanner of each Cable,
9
36486
4054
Supply & Erection of Cat-6, 1Mtr Patch Cords complete as per specification and as desired by EIC.
59
14268
241.84
Supplying,Installation,Testing and Commissioning of 40 Inches Full H.D LED Display Monitor as per the Specifications attached.
2
80000
40000
Supplying of 16 Channel Network Video Recoder(NVR) as per the Specifications Enclosed with a Hard Disk Memory of 8 TB capacity.
2
42000
21000
Supplying,Installation,Testing and Commissioning of 2 Mega Pixel Full High Definition Weather Proof Networkable Bullet Camera.
30
435000
14500
Supplying and drawing of 12 Pair Single Mode Optical Fibre Cables in the existing surface/ recessed Steel/ PVC conduit as required.
70
9450
135
Supply & Erection of Media Convertor complete as per specification and as desired by EIC.
6
32004
5334
Supply & Erection of Termination Box complete as per specification and as desired by EIC.
6
21846
3641
Supply, installation, testing and commissioning of 20 Pair jelly filled armoured cable of 0.5mm of each Pair Telephone Cable in the existing surface/ recessed steel/ PVC conduit, complete in all respect as per specification and desired by EIC
100
12200
122
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
3.5 C X 300 Sq.mm A2XFY(Main ckt)
50
133900
2678
3.5 C X 95 Sq.mm A2XFY( Sub Main ckt)
350
330050
943
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet)
-
-
-
3½ X 300 sq. mm (70mm) (Main ckt)
4
4780
1195
3½ X 95 sq. mm (45mm)( Sub Main ckt)
6
3528
588
Supply,installation with foundation as per approved Drawing 11 Mtr SP-56 S.T 410 Pole With earthing
2
48936
24468
Supply,installation of Structural Steel as per Standard Approved Drawing
600
90000
150
Supply,Installation and Commissioning of 11 KV Air Break Switch(200 Amps).
1
10578
10578
Supply,Installation of 11 KV L.A 10 ka (Station Class).
3
8043
2681
Supply,Installation of 11 KV HG Fuse Unit .
3
5550
1850
Supply,Installation of Disc Insulator(B&S)70 KN suitable for 100 sq.mm Triple AAAC.
3
681
227
Supply and Installation of B&S Hardware Fittings.
3
1761
587
Supply and Installation of 100 Sq.mm AAAC Triple AAAC.
30
4050
135
Supply,Installation of 11 KV Pin Insulator suitable for 100 sq.mm Triple AAAC.
3
750
250
Supply and Erection of 150 mm Dia. Heavy Class G.I Pipe for the Cable Protection.
9
22284
2476
Supply,Installation and Commissioning of 11 KV Trivector Meter with suitable size Out door Type combined C.T and P.T's of 5/1A Accuracy Class 0.5 S Burden 100 VA 11 KV/Root3/110 V /Root3 (20/5) CTR
1
193536
193536
Supply, Installation Testing and commissioning of 250 KVA Copper Wound Transformer with the Following Specifications:-
-
-
-
Capacity in KVA : 200Kva
Make :-GTB/Recons/A.E Electric
Reference Standards Transformer design & testing IS:1180 Part 2 (2014)
Loading: IS 6600
Oil:- IS 335
Porcelain bushing :- IS 3347
Tolerance on electrical parameters:- IS 2026
Duty :-Continuous duty
Windings:- EG Copper, Double wound
Core :-CRGO Type:- Outdoor
Input Voltage:- 11 KV Output Voltage :-433 V
Frequency :-50 Hz+/-3 Hz
No. of Phases :-3
Input configuration:- ( HV) Delta
Output Configuration:- ( LV) Star
Vector Group:- Dyn 11
Cooling:- ONAN
Max. ambient temperature :-50º C
Max. oil temperature rise:- 45º C
Max. winding temperature rise :-55º C
HV side High voltage withstand test :- 28 KV LV side High voltage withstand test :- 3 KV
% impedance at 75º C :-4.5% Mounting of cooling radiators :- Direct mounting on tank
Tapping :-Off circuit tap changer shall be provided on HV winding in variation from +/-5% in steps of 2.5%. Induced over voltage withstand test applied on LV side :-0.866 KV induced on HV side :-22 KV Terminal Arrangement HV side Bare:- Bushing LV side:- Cable Box with Aluminium Bus bars for cable termination.
Neutral:- To be Provided with earthing
1
675827
675827
Supplying and Laying of XLPE Insulated and PVC Sheathed Power Cable of 11KV/ 1.1 KV Grade of the following size direct in Ground including excavation,sand Cushioning,Protective Covering and Refilling the Trench as Required. 3 C x 50 mm² 11 KV XLPE insulated Aluminum. conductor PVC outer sheathed armoured HT Cable with Earth (A2XFY with Earth HT Cable).
100
148700
1487
HT CABLE TERMINATION :-
The scope also includes after HT termination Electrical contractor has to perform the High voltage test as per IS, If test is Ok then proceed further
-
-
-
Supply, Installation testing and commissioning of indoor type termination kit for 3 C x 50 mm² 11 KV XLPE insulated Aluminum. conductor PVC outer sheathed armoured HT Cable with Earth (A2XFY with Earth HT Cable).(Raychem make)
1
6500
6500
Supply, Installation testing and commissioning of outdoor type termination kit for 3 C x 50 mm² 11 KV XLPE insulated Aluminum. conductor PVC outer sheathed armoured HT Cable with Earth (A2XFY with Earth HT Cable).(Raychem make)
1
7500
7500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements