Housing And Urban Development Department Tender

Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto floor V level.( By manual means) In cement mortar 1:6 (1cement: 6 fine sand mortar) incld all carriages / Head load upo site of work complete

Brick work with bricks available at site of class designation 75 in superstructure above plinth level upto floor V level.( By manual means) In cement mortar 1:6 (1cement: 6 fine sand mortar) Incld removing of mortar from old bricks incld all carriages of other material complete

Cement Concrete Flooring 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Stone aggregate) finished with a floating coat of neat cement and cement slurry but excluding the cost of nosing of steps etc. Complete. a. 40mm thick with 20mm nominal size stone) Crushed.incld all carriages upo site of work complete

12mm thick cement plaster of mix 1:4 (1cement: 4 fine sand) including all leads , lifts and carriages of material upto site of work complete.

Providing/fixing of 4” dia PVC pipe incld earth excavation and refilling and incld cement concrete cushion in M-10 grade. including all lifts, leads and carriage of material upto site of work all complete.

Providing/fixing of 3” dia PVC pipe incld earth excavation and refilling and incld cement concrete cushion in M-10 grade. including all lifts, leads and carriage of material upto site of work all complete.

Providing and fixing 1st quality ceramic glazed Digital tiles of 1'-0"x1'-6" size confirming to IS: 1375 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colors, shades, except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, riser of steps and dodos over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sq m including pointing in white cement mixed with pigment of matching shade complete ncluding all carriages of material upto site of work all complete. (WALLS)

Providing and laying of vetrified floor tiles in different sizes (Thickness to be specifeid by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse Sand) including grouting the joints with white cement and matching pigments etc.,including all carrieges upto site of work complete. (Size of tile: 60 x 60 Cm)

Providing/fixing of 6mm thick (A-Grade) ply board sheeting incld providing/fixing of budloo wood framme work of required size incld providing/fixing of 3" x3" ornamental cornic of budloo wood complete in all respects and carriages complete

Providing and fixing of Aluminium work for doors, windows, ventilators and partitions with extruded builtup standard tabular sections/appropriate Z. sections and other sections of approved make conforming to IS: 733 and IS : 1285 fixed with dash fasteners of required dia and size including necessary filling up of gaps at jucntions at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, striaght, mitred and jointed mechanically whereever required including cleat angle with 5mm thick plane glass ACP sheats where ever required and locking arrangement of doors complete job. Aluminium Snap beeding for glazing/ panelling C.P Brass/ Stainless Steel Screws all complete as per Architecture drawing and the directions of Engineer-in- charge. including gazing, panelling and dash fastners polyster powder coated Aluminium (minimum thickness of polyster powder coated 50 microns and minimum frame size for out Frames (100 x 50) mm , doors (75 x50) mm , windows (50 x50) mm . incld all carriages

Providing and applying 2mm thick white cement based putty of approved brand and manufacture over plastered surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give even shade New Work ( two or more coats) over and including priming coat with cement primer including carriages of material upto site of work complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats over priming coat of wood based primer and putty of approved brand and manufacture on wood works including all carriages complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats over priming coat of ready mixed red oxide zinc chromate priimer and putty of approved brand and manufacture on steel works including all carriages complete.

Structural Steel work in built-up sections / framed work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer using structural steel as required in gratings , frames,guard bar, ladders raillings, brackets gates and similar work including all leads , lifts and carriages of material upto site of work complete.

engagement of labour for setting right old grill incld welding etc

Providing/fixing of 12mm thick Modular Readymade Hardwood (Non local imported) Panelling incld frame work of Budloo wood of required size incld cost of nails, adhesives, canas and two or more coats of melamine wood polish incld all carriages complete in all respects

Finishing walls with water proofing Cement paint of approved brand and manufacture and of required shade to give an even shade. New Work (Two or more Coats) applied @ 3.84 Kg/10 Sq m. including all leads , lifts and carriages of material upto site of work complete.

Providing and fixing 4 mm thick glass panes for windows for glazing incld beeding with all necessary fittings including all leads , lifts and carriages of material upto site of work complete.

electrification by way of providing/fixing of 03/20 and 07/20 wiring for heating and lighting incld providing/laying of conduit pipies ,swithes, switch board & providing/fixing of junction boxes etc all complete Lighting points

heating points

Fans

Providing and fixing G.I. pipes complete with G.I. fittings and clamp including cutting and making good the walls. Internal 15 mm Nominal bore

Providing and fixing C.P Brass wash basin Bib cock of approved quality (15mm nominal bore).

Providing and fixing C.P Brass Bib cock of approved quality (15mm nominal bore).

Providing and fixing water closet squatting pan( W.C pan Indian type) with 100mm P or S trap, 10 litre low level PVC flushing cistern with all fittings and clamps, overflow arrangement of approved design including all fittings and cutting and making good the walls and floors wherever required.(Orissa pattern white vitreous China W.C. pan of size 580x440mm) including all costs and carriages upto site of work complete.

Providing and fixing flash tank

Providing and fixing of wash basin with C.I/M.S brackets. 15mm C.P brass pillar taps, Kingston/Gem/Techno/Parko/Jaguar/Escko, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting with a pair of C.P Brass pillar taps and making good the walls wherever required flat back Wash basin size 630x450m

Providing and fixing of C.P brass Angle Valve of approved quality ( parker/ Mark/ Cera) including all fittings complete.

Providign and fixing of Water Heater Gyser Venus make or equivilant of capacity 50 liters all complete including all necessary fittings etc complete.

providing/fixing of connecting pipes

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank ISI mark with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex/Star) or as directed by the Engineer -in- charge complete with all fittings complete.

Supplying, installation , Testing and commissioning of automatic voltage stablizer 5 KVA air cool for providing requisite voltage to the sodium vapour fitting.(ALBA/approved make)

Providing and fixing of main cable for electrification ( Anchor/Havells / Pointer make.)

Providing/fixig of box type cuboards made of water proof 19mm and 12mm ply boarding incld making of shelves etc incld providing/fixing of dunmica/ teak wood of approved quality with nils/adhesive incld providing/fixing of locking arragements, handles etx incld all carriages complete in all respects

Providing and laying of 50mm thick colored interlocked Rubber Moulded Cement concrete tile of specified pattern (tile manufacture in M- 20 Grade) and laid over a bed of 50mm sand cushion over a bed of lean cement concrete 1:4:8 mix 3" thick stone solling & 4" thick mud mate including all carriages of material upto site of work all complete.

Providing and fixing of Sign Board and taking of Photographs before, during and after execution of work.