Housing And Urban Development Department Tender

Centering and shuttering incl. strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour or shade(18mm thick).

Providing edge moulding to Granite work, including machine polishing to edges to give high gloss finish etc. complete.

Providing and fixing of ceramic sink of approved make incl. waste pipe &all carriages complete. (600mmX600mm)

Providing and fixing of Sink Mixer of approved make incl. all carriages complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) Incl. carriage complete Job

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Incl. carriage Complete Job

Providing and fixing Granite of any colour and shade for walls over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3kg/sqm including pointing in white cement with curing complete. (18mm thick)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick.

Applying priming coats with primer of approved brand and manufacture, With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length. Imported wood.

Providing and fixing 35mm thick paneled shutter of Imported wood incl.12mm thick prelaminated board panel in door complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters .For thickness of tiles 10 mm to 25 mm.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: A) Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. B) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. C) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanized with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bimetallic contacts all complete required to perform as per specification and drawing The item includes cost of all material &labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Construction of Cupboard movable below counter by way of P/F of deodar wood frame ,19mm waterproof ply boards and scratchproof sunmica .Including cost of Drawers, shutters for cupboard,Stainless steel channels,stainless steel baskets,screws, handles , hinges and adhesive etc. complete.

Providing and fixing glass panes, with wooden beading putty and nails wherever necessary Float glass panes of thickness 3.5mm.

Providing and fixing of various chinaware items/C.P items /PPR items of approved make ,including Cutting holes of required size in brick masonry wall for fixing of pipe and making good the same etc. complete as per direction of Engineer-in-charge. (a)PPR Items:

1)Elbow 25mm=82 No.

2)Tee 25mm

3)Socket 25mm

4)Adopter 25mm male

5)Adopter 25mm female

6)Elbow 25mm female

7)Elbow 25mm

8)Pipe 25mm

9)Reducer (25x32)mm

10)Pipe 32mm

11)Elbow 32mm

12)Tee 32mm

13)25mm Double Battery

14)Tee (32x25)mm

15) (32x25)mm female Tee

16)Socket 32mm

17)Union 32mm

18)Ball Valve 32mm

19)Adopter male (32x25)mm

20)Adopter female (32x25)mm

21)Elbow(32x25)mm

(b) CP items:- 1)Angle Valve

2)Geyser bolt 4”

3)CP connection 18”

4)Soap case

(c) PVC Items:- 1)PVC Pipe 4” Dia.

2)PVC Waste pipe

3)Floor trap 3”

4)Door bend 3”

5)Plain bend 3”

6)Collar 3”.

7)Plain tee 3”

8)Bend 45ᵒ 3”

9)Door inspection 4”

10)PVC pipe 3”

11)Plain Y-Junction

12)Clip 25mm .

13)Clip 32mm

14)PVC clip 3”

15)Collar 4”

16)Door tee 4”

17)Door bend 4

18)Door inspection 3

19)Plain bend 4

20)Plain tee 4”

21)Floor trap 4”

22)Half set 3”

Constructing brick masonry chamber for underground inspection chamber with common burnt clay (non modular) bricks of class designation 7.5(9” thick walls) in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame(Heavy duty) 455x610 mm internal dimensions, foundation concrete 1:4:8 (1 cement: 4 fine sand: 8 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete . Inside dimensions 455x610 mm and 45 cm deep. Also includes cost of soling and all carriages complete.

Providing and fixing of 25 Liters capacity Geyser of approved make incl. cost of CP connections ,geyser bolts and carriage complete.

Providing and fixing of towel ring of approved make including all carriages complete.

Providing and fixing of water closet of approved make including all carriages complete. Item as per SSR Indian Type= 01 No.

English Type = 01 No.

Providing and fixing of 10 Liter capacity PVC cistern of approved make including all carriages complete.

Providing and fixing of wash basin (24”) with pedestal and waste pipe of approved make including all carriages complete.

Providing and fixing of various electrical fittings , accessories ,gadgets etc. including Cutting of required size in brick masonry wall for fixing of pvc conduits and making good the same etc. complete as per direction of Engineer-in-charge. a)Lighting Points

b) Heating Points