Housing And Urban Development Department Tender

Form work,centering and shuttering incl. Removal of same after completion of work:-

Walls of any thickness:-

Providing and laying chisel dressed Devri stone size as per the directions of the Engineer incharge with 150mm depth in cement mortar1:6 (1 cement: 6 coarse sand) including curing.in :Fine chisel dressed.

Providing and laying of Devri stone Cornice edges, moulding, as per site requirement laid on the top of the Devri Block / Pillars well dressed and fine chisseled in 1:3 mix cement motar (thickness upto 75 mm and depth as per site requirement including making the joints uniform and its safe carriage upto site of work the is to be carried as per approved drawings and directions of the Engineer Incharge..

Supply installation,testing and commissioning of ornamental lights and providing armoured cable from main sub station to individual light boxes with 2.5 sq mm 4 core cable of reputed make isi mark.The job includes providing connections,clamps,conduit pipe,terminators JBS,MCB of 12/15 watt LED lights of reputed make HAVELLS complete job as per directions of Engineer in charge.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat pf approved steel primer using structural steel etc. as required:- In gratings, frames, guard bar, ladder,railings, brackets ,gates and similar works.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:- Two or more coats on new steel work.

Providing and fixing of 200 mm dia Piles of 1st Class Kiker Wood including driving and all types of carriage upto site of work

Providing and fixing of 2nd class kail wood for frame work and trusss work complete job including polishing of approved brand as per the directions of the Engineer Incharge.

Providing & fixing ornamental vertical posts of 2nd class Deodar wood of approved pattern & design incld. providing & applying two or more coats of Touch wood polishing etc. complete ( length = 9 feet , 9”dia.

P/F track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalume steel. The sheets shall have wide panes with 3 No. stiffing ribs, effective water shedding and special male/female ends with fuil return legs on side lapps for purlins support and anti capillary flute inside lapp. The sheets shall have a hot dip metallic coated of zinc and aluminum (150 gms/sm) zinc/aluminum coating mass total on both side AZ-150 as IS-1397,550 PMA, yeild stress. Providing silicon modified polyester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area).50mm (Including cost of ridges / valleys of plain colour coated sheets complete) 

Providing and fixing of ornamental eves boarding of size 300mm in width (complete job), of approved pattern and design

Providing and Fixing of khatambandi in ceilings of approved pattern / design incld. cost of screws / nails & sca-folding charges incld. cost of rough ceiling of 12mm thick ply wood & supporting frame work / all carriages of material upto site of work complete ( First class Budloo wood) including providing & appling two or more coats of touch wood polishing complete in all respects.

Providing & fixing 20mm thick ornamental panels (PINJARA KARI WORK) as per approved pattern /design 2nd class deodar wood with necessary screws & beading ,incld. Providing & applying of touch wood polishing with two or more coats complete job.

Providing & fixing 16mm dia mild steel round bolts of 450 mm long with nuts & washer plates complete

Carriage of materials by mechanical transport from approved source to site of work including loading, unloading and stacking.

Stone agg. 20 mm N/S avg. lead 14 Kms

Sand avg. lead 7 Kms