Housing And Urban Development Department Tender

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area of 3 sq. metres and below (Complete Job).

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : . In mud mortar (Complete Job).

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) : From brick work in mud mortar (Complete Job).

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (Complete Job)

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick (Complete Job)

Half brick masonry with bricks of class designation 75 in foundations and plinth in : (Complete Job). Cement mortar 1 :4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level. (Complete Job).

12mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Making the opening in brick masonry including dismantling, fixing chowkhats in floor or walls cutting masonry and fixing holdfasts in cement concrete 1:3:6 (1 cement:3coarse sand : 6 stone aggregate 20 mm nominal size) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors complete to match the existing surface : (Complete Job) For window

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4 graded stone aggregate 20mm nominal size (Complete Job) (A) Crushed

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Complete Job). Size of tile 60x60cm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately.) for fixed portion (Complete Job). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately.) (Complete Job). For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.)

Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. (Complete Job)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) (Complete Job) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg I sqm)

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level (Complete Job).

Centring and shuttermg including strutting, propping etc. and removal of form for· (Complete Job). Lintels, beams, plinth beams, girders, bressumers and centilevers.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (Complete Job).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Complete Job).

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Providing and fixing aluminium round shape handle of outer dia 1OOmm with SS screws etc. Complete as per direction of Engineer-in-charge Anodized (AC 15) aluminium (Complete Job).

Providing and fixing 1OOmm brass locks (best make of approved quality)for aluminium doors including necessary cutting and making good etc complete (Complete Job).

Providing and fixing carbon steel galvanised (minimum coating 5 micron )dash fastener of 1 0 mm dia double threaded 6.8 grade (yield strength 480 N/mm2) counter sunk head, comprising of 10m dia ployamide PA 6 grade sieve sleeve including drilling of hole in frame , concrete masonary etc. as per direction of Engineer-in-charge. 10x120mm

Providing and fixing fly proof wire gauze to windows, clerestory windows & doors with M.S Flat 15x3 mm and nuts &bolts complete. Galvanised M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperature on both sides

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes

Providing and fixing lSI marked aluminium butt hinges lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x63x3.2 mm

Providing and fixing lSI marked aluminium butt hinges lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 75x63x3.2 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm

Providmg and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body, door weight upto 36-80 lg and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete :

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper

Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of engineer-in-charge

Providing and fixing sliding arrangement in rack/cup boards/cabinets shutter by with stainless steel rollers to run inside CorE aluminium channel section (the payment for C orE channel shall be made separately)