Housing And Urban Development Department Tender

Supply, Load, Transport to site, Receive & Unload at site, Store, Unpack, Erection, Testing & Commissioning of Diesel generator set of 625 kVA capacity (at 40o C Ambient temperature),with electronic governor as per specification. Also the cost shall include the freight & insurance. DG to be of prime / continuous duty application as per IS. Alternator to be provided with Class 'H' insulation & with cable termination box for LT Cables. Alternator to be provided with local isolator indoor/ outdoor type for maintenance purpose. DG set coupling to be with double bearing type, teethed gear coupling. The cost shall also include Engine Control Panel (Type: EGCP / Power Command Control) with RS 485 common. port. (AS PER PCB-4 NORMS) CENTRAL POLLOTION CONTROL BOARD OF INDIA. DG sets shall be suitable for auto synchronizing with auto load sharing and remote monitoring & control arrangement compatible with the existing electrical system. DG Set with Alternator with Integral Acoustic Enclosure shall include the following components and accessories complete. AMF Panel and Control Cable as per site requirement. a Residential type Silencer b Anti‐Vibration Mounts (as required) c Battery and Charger Dynamo (As per OEM) d 990 Ltrs MS Fuel Tanks with float/ limit switch indicator for low & high fuel level. Required number of contacts to be provided for connecting the level limit switch for indication in DG Control Panel. e Fuel system consisting of Connect Fuel Pipe with MS "C" Class Pipe with flange & gas welded joint & pipe fittings like valves & other accessories and breather drain pipes if required need to be provided. Make: Standard Brand

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)