Horticulture Production Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Horticulture Production Department - HPD Tender
Civil And Construction
Eprocure
Opening Date10 Nov 2021
Closing Date16 Dec 2021
Tender Amount₹ 7,75,50,000
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Establishment Of 2000 Mt Cold Store At Narwal Jammu And Kashmir
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_HPD_146863_1Bid Award Id
ViewTender No
80 of 2021Tender Authority
Horticulture Production Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Pre-Engineered Steel Structure Building (PEB) as per technical specifications including steel built-up section at Mezzanine Floor level with RCC slab over Steel Decking Sheets.
1
-
-
INSULATION FOR COLD CHAMBER & CORRIDOR (ANTE ROOM) - as per technical specification given in Tender Document-Employer's Requirement :
-
-
-
Insulation PUR Sheets for floor insulation in Cold Chamber + Corridor (Ante Room) as per technical specification given in Tender Document.
A) Total 100 mm thick
B) Thermal conductivity of the insulation material is at least 0.023 W/(mK)
C) Completed with 50 micron thick Aluminium sheet/ 250 Micron PVC Sheet as vapour barrier and Blown bitumen of 85/25 grade to be spread @1.5 kg/m2 on each surface (total 4 surfaces i.e. 6 kg/m2 .Top layer of minimum 2.4 mm thick bituminized tar-felt.
880
-
-
PUF Panels for COLD STORE & COLD CHAMBER- as per technical specification given in Tender Document Employer's Requirement :
-
-
-
Providing and Fixing PUF Panel 120mm thick (Wall & Ceiling) along with accessories and necessary screws which include C-Chanels/Flashings/Chemical System and Pressure testing of PUF panels complete job.
3100
-
-
Gastight coating and flees as per technical specifications given in Tender Document-Employer's Requirement and in accordance with ISO 6949 regulations
A) All corner connections (floor-wall, wall-wall, wall-ceiling) within the cells
B) All Panel joints
C) Panel joints above evaporator
D) Connections around passages, door and hatch
1
-
-
Wall Protection as per technical specification given in Tender Document-Employer's Requirement and in accordance with ISO 6949 regulations applied less than 120 mm from wall. Posts of stainless steel U-100 at a foot plate 80/150/10 mm , height 500 mm, galvanised, column spacing approx. 1.500m, with adhesive anchors fixed in the floor. Beam in stainless steel profiling at least 180 (height)/10 mm.
340
-
-
CA doors of size 2500 mm (W) x 3500 mm (H) with lockable control window of sixe 600 mm (W) x 800 mm (H) complete in all respect as per technical specification given in Tender Document-Employer's Requirement .
10
-
-
Mild Steel Hollow square pipes 75 x 75 x 3 mm for protection to PUF walls in the chambers along with foot plate doweled to the concrete floor for all chambers.
1
-
-
ROOF INSULATED SANDWICH PANELS -as per Technical specification in Tender Document- Employer's Requirement.
Providing and Fixing Roof Insulated Sandwich Panel 50mm thick along with accessories and necessary screws.
925
-
-
Refrigeration
-
-
-
REFRIGERATION PLANT as per technical specification given in Part-2- Employers' Requirement in Section- VI - Employers' Requirement -4A
-
-
-
Refrigeration compressor of capacity 55 KW at minus 10 deg C SST and 35 deg C DST complete with accessories as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
3
-
-
VFD Drive for one compressor only - as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
2
-
-
Oil Separator (one per compressor) - as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
• Collection
• Filtering
• Levelling
3
-
-
Evaporative Condenser (capacity at 10 K, Tc 35 deg C) 175 KW including fans , valves fittings, controls and electricals etc. as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
HP Ammonia receiver suitable for 175 KW refrigeration capacity as per technical specification given in Part-2-
Employers' Requirement in Section-VI - Employers' Requirement
including safety relief valves , gauge glass ,air release valves ,controls and water sprinkler etc.
1
-
-
Heat exchangers/cooler units - Single sided blow through type, ceiling supported as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no. 4.1.1 B of following sizes/ capacities
-
-
-
CapacityHeat exchangers/cooler for room storage capacity :200 MT room
10
-
-
Constructive material to fix coolers to the ceiling . Fastening material (threaded ends) shall be of stainless steel -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Curtain left and right next to cooler as per technical specification given in Part-2- Employers' Requirement in Section- VI - Employers' Requirement and shall include:
• Length under cooler 1,200 mm
• Strong material (f.e. PVC Bisonyl tarp)
• Constructed (weighted) that suction by airflow is prevented.
10
-
-
Ammonia and Propylene Glycol valves, controls, fittings, nut bolt and gasket -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
MS "C" pipes and fittings for refrigerant piping-as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
GI "B" class pipes & fittings for water piping -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Propylene Glycol PHE Chiller of capacity 175 KW -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement , complete with controls & accumulator
1
-
-
Propylene Glycol Storage Tank with two compartment of suitable storage/ operational capacity at 175 KW refrigeration load -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Propylene Glycol Primary Pumps ( 1 W +1 S)- as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement .
2
-
-
Propylene Glycol Secondary Pumps ( 1 W +1 S)-as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement .
2
-
-
VFD Drive for Primary & Secondary Glycol Pump- as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
4
-
-
Propylene Glycol Flow control valves including pumps for each chambers-as per technical specification given in Part- 2- Employers' Requirement in Section-VI - Employers' Requirement
10
-
-
Refrigerating PLC control system -as per technical specification given in Part-2- Employers' Requirement in Section- VI - Employers' Requirement , Complete with PLC and PC, LCD monitor & Windows 12 PRO including printer and internet connection ,Software licence
1
-
-
Temperature Sensors PT1000 , at least 4 temperature sensors / Cold chambers -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
10
-
-
Defrost water measuring system as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
10
-
-
Electrical Panel with Automatic power factor controller Panel ( APFC Panel with adequate capacitors to maintain p.f. ≥ 0.95 ;as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Ammonia leak detection system- as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Ammonia Safety system -as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Ammonia, lubricant and propylene glycol- as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
ELECTRICALS , PIPE SUPPORTS AND PIPE & EQUIPMENT INSULATION FOR REFRIGERATION EQUIPMENT - as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement -4A
-
-
-
Cables , Cable tray , earthing pits etc. for complete referigeration as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no. 5.3.8 & 5.3.9
1
-
-
Pipe supports including for AHU , Condenser , Refrigeration and piping etc.as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no.4.1.1 A(aa). The job includes bridge type supports for piping wherever necessary including civil foundfation for supports
1
-
-
Pipe line insulation with in-situ PUF including for Propylene Glycol Storage Tank & Aluminum cladding. All piping (as well glycol and NH3) carrying cold coolants, are insulated with PU scales 2 x 40 mm. Above 90 mm diameter 2 x 60 mm PU scales. At the position of brackets and suspension points, the insulation is sealed and vapour-tight. Valves, pumps and other fittings may remain uninsulated. - as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no.4.1.1 A ( r&s) and 4.1.1 H (i)
1
-
-
Supply , design and installation of electrical items (POLE, CIRCUIT BREAKERS, PANELS AND TRANSFORMER) AS MENTIONED IN THE Annexure E (Emploers requirement)
1
-
-
MATERIAL HANDLING EQUIPMENT -As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no. 5
-
-
-
BATTERY OPERATED FORK LIFT including spare battery set - As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
HAND OPERATED PALLET MOVER - As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
6
-
-
MISCELLANEOUS EQUIPMENT EQUIPMENT -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement -4A
-
-
-
Air Curtains -As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
2
-
-
50 Kg platform type weighing scale -As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
3
-
-
Organic Waste Convertor 50 Kg /batch
1
-
-
Odour Control System (Eco- Sorb unit)
1
-
-
Schedule III -
-
-
-
Schedule No. 3: Design Services
-
-
-
Submitting vetted design and drawings of civil works along with Geo technical investigation and topographical survey as mentioned in the employers requirement.
1
-
-
Submitting vetted design and drawings/ layout of mechanical works as mentioned in the employers requirement.
1
-
-
Schedule IV
-
-
-
PRE- ENGINEERED BUILDING ( PEB) STEEL STRUCTURE -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no.1
-
-
-
Installation , testing , commissioning & handing over of Pre-Engineered Steel Structure Building (PEB) as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Installation , testing , commissioning & handing over PUR panels for External walls , Internal wall (partition wall), External wall of pack-house and Ceiling of CA Chamber & Corridor (Ante Room)-Employer requirement
-
-
-
Installation , testing , commissioning & handing over of Floor insulation in CA Chasmbers and Corridor ( Ante Room ) as required with PUF Insulated sheets as per employers rerquirement
880
-
-
Providing and Fixing PUF Panel 120mm thick (Wall & Ceiling) along with accessories and necessary screws which include C-Chanels/Flashings/Chemical System and Pressure testing of PUF panels complete job.
3100
-
-
ROOF INSULATED SANDWICH PANELS -as per Technical specification in Tender Document- Employer's Requirement.
Providing and Fixing Roof Insulated Sandwich Panel 50mm thick along with accessories and necessary screws.
925
-
-
Gastight coating and flees as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement and in accordance with ISO 6949 regulations
1
-
-
Wall protection a s per technical specification given in Part-2- Employers' Requirement in Section-VI - and in accordance with ISO 6949 regulations applied less than 120 mm from wall. Posts of stainless steel U-100 at a foot plate 80/150/10 mm, height 500 mm, galvanised, column spacing approx. 1.500 m, with adhesive anchors fixed in the floor. Beam in stainless steel profiling at least 180 (height)/10 mm
340
-
-
CA doors of size 2500 mm (W) x 3500 mm (H) with lockable control window of size 600 mm (W) x 800 mm (H) complete in all respect as per technical specification given in Part-2- Employers' Requirement in Section-VI
10
-
-
Manual Horizontal Sliding Door for Corridor ( Ante Room ) of size 2500 mm (W) x 3500 mm (H) complete in all respect as per technical specification given in Part-2- Employers' Requirement in Section-VI
1
-
-
Mild Steel Hollow square pipes 75 x 75 x 3 mm for protection to PUF walls in the chambers along with foot plate doweled to the concrete floor for all chambers.
1
-
-
Installation , testing , commissioning & handing over of Refrigeration Plant & Equipment complete in all respect including electricals, pipe supports and pipe & equipment insulation as required and as per technical specification given in Part-2- Employers' Requirement in Section-VI
1
-
-
Installation , testing , commissioning & handing over 600 KVA DG Set and 630 KVA Transformer -As per technical specification given in Part-2- Employers' Requirement in Section-VI
1
-
-
Air Curtains -As per technical specification given in Part-2- Employers' Requirement in Section-VI
2
-
-
Installation of Organic Waste Connvertor
1
-
-
Installation of Odour control system
1
-
-
Schedule V
-
-
-
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto
1.5 m in -All kinds of soil.
1200
-
-
Earth work in excavation by manual means/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
-
-
-
All kinds of soil :
324.86
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
302.2
-
-
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
240.74
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for:
-
-
-
Foundations, footings, bases for columns
55.85
-
-
Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.
123.75
-
-
FORM WORK
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
266.28
-
-
Walls (any thickness) including attached pilasters, buttresses, plinth and
string courses etc.
181.29
-
-
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
340.94
-
-
Columns, pillars, piers, abutments, posts and struts.
140.8
-
-
Suspended floors, roofs, landings, balconies and access platforms.
264.32
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete upto plinth level
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
54270.19
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
81.22
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge.
Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as
per design mix is content considered payable or recoverable separately.
-
-
-
All works above plinth level upto floor V level
288.32
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed
together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking
with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile
steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
80x1.20 mm M.S. laths with 1.20 mm thick top cover
70
-
-
Providing and fixing ball bearing for rolling shutters.
8
-
-
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in
superstructure above plinth level up all floor level including curing in :
-
-
-
Cement mortar 1:6 ( 1 cement : 6 coarse sand)
51.3
-
-
CEMENT PLASTER (IN COARSE SAND)
12mm Cement plaster of mix:
-
-
-
1 : 6 ( 1 cement : 6 coarse sand)
223.04
-
-
15mm Cement plaster on the rough side of single or half brick wall of
mix:
-
-
-
1 : 6 ( 1 cement : 6 coarse sand)
211.04
-
-
Supplying and filling in plinth with fine sand under floors including, watering,
ramming, consolidating and dressing complete.
259.89
-
-
Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
119.71
-
-
Steel Ladder
2
-
-
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
-
-
-
Welded
3428.65
-
-
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as
desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape
wherever required.
536.32
-
-
Providing and laying of stone soling hand packed including ramming and levelling complete as per direction of Engineer in charge.
105.22
-
-
Providing and fixing 30 mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19
mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be
tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC
strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using
PVC solvent adhesive etc. complete as per direction of Engineer-in-charge,
manufacturer’s specification & drawing
-
-
-
Pre-laminated PVC door shutters
1.92
-
-
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
-
-
-
Casement window double panels with S.S. friction hinges (300x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm &
mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75
sqmupto1.50 sqm).
4.32
-
-
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete.
-
-
-
2 mm thick
434.08
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to aircure for 4 hours followed by water curing for 48 hours.
The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which willbe paid for separately)
102.12
-
-
Providing and fixing transparent Polycarbonate Sheets 1.2 mm thick along with all the accessories and necessary screws.
48
-
-
EXTERNAL DEVELOPMENT
Development of land by way of -Soling/PCC/Drainage/Manholes/Electric Poles/Parks & Paths.
1
-
-
SANITARY FIXTURES
-
-
-
Providing , fixing, testing and commissioning of of white vitreous china European type water closet floor/ wall mounted with concealed P trap and low volume concealed type flushing cistern with internal fittings made of high grade plastic and non-corrosive metal, matching polypropelene seat and cover, CP brass hinges rubber buffers, with accessories, CI/MS concealed brackets painted with two or three coats of enamel paint of approved shade over a coat of primer. CP brass screws and wooden cleats, including cutting and making good the wall and floors wherever required in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of C.P. hand spray (health faucet) with push button control and flexible hose connection with C.P. holder for hand spray complete in all respects. in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of CP brass Toilet Paper Holder fixed to PVC raw plug with SS screws, making holes in walls & making good. in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of Under/Over counter wash basin with C.I. brackets, 32 mm C.P brass/ PP waste fitting and C.P brass/ PP waterless Bottle trap - of standard pattern, including supply of CI Bracket fitting, flexible pipe with Supply of painting of fitting, cutting and making good the walls wherever required in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of single lever pillar tap for wash basin complete in all respect as per direction of Engineer -in -Charge..
1
-
-
Providing , fixing, testing and commissioning of senor pillar tap for wash basin complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing , fixing, testing and commissioning of white vitreous china Urinal basin of standard size
C.P brass flush pipe, spreaders with unions and clamps (all in C.P brass) with waste fitting & waterless PP bottle trap (if required), with outlet grating, Infra-Red based electronic flushing system operated on 6V DC (4AA) battery for urinals comprising of solenoid valve, concealed built in strainer
& flow mechanism piping, flush mounted sensors with all accessories & fittings complete in all respect in fully operational condition and other couplings in C.P brass including painting of fitting and cutting and making good the walls and floors wherever required. in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of of glass urinal partition as per interior drawing including providing & fixing concealed CI bracket, cutting and making good, complete in all respect in all respect as per direction of engineer in charge.
1
-
-
Providing , fixing, testing and commissioning of Stainless steel AISI 304 (18/8) Pantry sink with CI/MS (Painted) bracket and stainless steel plug 40 mm including drain connection with PP 40/50 mm Dia pipe, painting of fittings and brackets, cutting and making good the walls wherever required in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of of 15 mm CP brass wall mounting single hole mixing fitting for sink with swinging and swivel spout complete including cutting and making good the walls wherever required in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of C.P brass Angular stop cock with wall flange (Angle Valve) for basin mixer,health faucet, Shower & WC etc. of approved quality complete in all respect in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of SS finished Robe hook fixed to wall / door with wooden cleats and SS screws including cutting and making good the wall wherever required complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing , fixing, testing and commissioning of of SS liquid soap Dispenser with Metallic Bottle complete including cutting and making good the wall wherever required in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of fully automatic "No tough" recessed SS brushed finish hand drier with paper dispencer and waste bin suitable to operate on 230 volts, single phase, 50 Hz AC power supply complete with brackets or required fixing arrangeements for fixing including cutting and making good the walls wherever required and connection complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing , fixing, testing and commissioning of adjustable support arm for physically challanged persons complete accessories complete as required including cutting and making good the wall and floor as required in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of white colour Handrail for fix mounting 600mm long of for physically challanged persons complete accessories complete as required including cutting and making good the wall and floor as required. in all respect as per direction of Engineer -in -Charge
1
-
-
INTERNAL DRAINAGE
-
-
-
Providing, fixing, and testing of uPVC SWR type B pipes and fittings, Push fit type, as per IS 13592 and fittings as per IS 14735 with factory fitted lip ring and complete as per specification and as required Vertical Soil, Waste, Vent/ASP Pipe fixing at wall / ceiling level supported by Painted M.S angle and G.I clamp with rubber line brackets & hangers etc. duly epoxy coated. cutting, chases / holes in floors / walls / slab in all respect as per direction of engineer in charge
-
-
-
75 mm dia
1
-
-
110mm Pipe dia
1
-
-
Providing, laying, jointing and testing uPVC pipes conforming to IS 4985 (6 kg/cm2) including injection moulded fittings with bosses e.g. tees, bends, couplings, adapters etc. and jointing with solvent weld joint, chasing, making wall good with cement and concrete complete as per specification and as required indirect waste Pipe as directed by Engineeer-in-charge.
-
-
-
40 mm dia.
1
-
-
50 mm dia.
1
-
-
Providing, fixing and testing of uPVC P or S trap having 50mm water seal, including jointing, making good the walls, floors etc., complete of nominal size - 110x110mm outlet in all respect as per direction of Engineer -in -Charge
1
-
-
Providing, fixing, testing & commissioning of uPVC inlet fitting with maximum 3 inlets 40, 50 OD size, fixed to uPVC traps including solvent weld joint/rubber ring joint complete with all civil work in all respect as per direction of engineer in charge
1
-
-
Providing ,fixing, testing and commissioning of combination of 110 x 110 mm elbow and 110 x 50 mm eccentric reducer uPVC waste (as Floor Drain) with extension piece, elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to floor trap in all respect as per direction of Engineer -in -Charge
1
-
-
Providing ,fixing, testing and commissioning of heavy duty SS grating of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for floor drain and floor trap: Size 100 mm x 100 mm in all respect as per direction of Engineer -in
-Charge
1
-
-
Providing and fixing in position square stainless steel cockroch trap consisting of 0.45 mm thick inner and outer cup and 1.0 mm thick top grating (Jali) with ring to be fixed inside ‘P’ traps with cement concrete. (for Floor Trap) - As per approved sample: Size 125 mm x 125 mm in all respect as per direction of Engineer -in -Charge
1
-
-
Providing & fixing clean out plug with suitable openable fittings, male threaded joint with threaded socket fixed to pipe, joints as required complete in all respects : 110 mm dia in all respect as per direction of Engineer -in -Charge
1
-
-
Supplying, fabrication and fixing of MS grating fabricated from 16mm square rod/ 20x4 mm MS flat having 20mm clear spacing, one piece upto 1000mm long, fixing angle iron frame 25x25x4 mm angle with hold fast at 1m c/c in cement concrete and hinged grating madeout of 35x5 mm flats in 1m length inclusiveof welding, griding etc. & including redprimer & two coats of enamel paint and setin cement mortar 1 : 3 (1 cement : 3 coarse sand) complete in all respect 350 mm wide. in all respect as per direction of Engineer -in -Charge
1
-
-
Supply, installation, testing & commissioning of G.I. Pipes Class 'C' (Heavy grade) conforming to I.S. 1239 with G.I. Fittings conforming to IS : 1879 such as tees, crosses, plug, socket, elbows, reducers, flange, check nut, flanges & clamps, hanger, structural steel supports as required / directed at Site including cutting, making good the walls and painting with two or more coats of synthetic enamel paint of approved quality and shade over a coat of approved priming coat as directed by the Project Manager etc. (For Sump riser) 80 mm dia GI Pipe for Sump pump
1
-
-
Providing, laying, jointing and testing uPVC pipes conforming to IS 4985 (6 kg/cm2) including injection moulded fittings with bosses e.g. tees, bends, couplings, adapters etc. and jointing with solvent weld joint, C.I gratings over pipes of bell mouth construction with epoxy painting for terrace, fixing at wall / ceiling / floor level supported by clamp & hangers etc. inside duct / suspended from floor under false ceiling.The Pipes will be supported by either rubber lined G.I. U strap clamps on 50 x 50 x 5 mm MS slotted angle duly painted (for a group of pipes) or G.I. rubber lined split clamp (for independent pipes). The cost will include all support arrangements with any minor chasing / chopping / civil masonry work. commissioning of all pipes lines as per drawings and specifications and as directed by Project Manager at site.
1
-
-
75 mm dia
1
-
-
110 mm dia
1
-
-
160 mm dia
1
-
-
WATER SUPPLY (INTERNAL)
-
-
-
Providing, fixing, testing and commissioning of PP-r (Polypropylene Random) glass fibre compound 3 / 5 layer food grade pipe of PN – 16 in accordance with DIN EN 21003 for Domestic, Flushing & Hot water application with corresponding hot fusion welded, PR-r fittings like Tees, elbows, sockets, Reducers, Unions, brass wall adaptors (both male and female) etc. Cutting and making good the walls, floors, RCC work etc. cutting chase and filling the same with cement concrete 1:3:6 (1 Cement :3 Coarse sand : 6 graded stone aggregate 20 mm nominal size ) or cement Mortar (1 Cement
: 4 Coarse sand) as required. . (Concealed Piping) in all respect as per direction of Engineer -in - Charge
-
-
-
15 mm dia
1
-
-
20 mm dia
1
-
-
25 mm dia
1
-
-
Providing, fixing, testing and commissioning of PP-r (Polypropylene Random) glass fibre compound 3 / 5 layer food grade pipe of PN – 16 in accordance with DIN EN 21003 for Domestic, Flushing & Hot water application with corresponding hot fusion welded, PR-r fittings like Tees, elbows, sockets, Reducers, Unions, brass wall adaptors (both male and female) etc. supported by clamp & hangers etc. inside duct / suspended from floor under false ceiling.The Pipes will be supported by either rubber lined G.I. U strap clamps on 50 x 50 x 5 mm MS slotted angle duly painted (for a group of pipes) or G.I. rubber lined split clamp (for independent pipes). The cost will include all support arrangements with any minor chasing / chopping / civil masonry work. commissioning of all pipes lines as per drawings and specifications and as directed by Project Manager at site.. (For Shaft and Terrace) in all respect as per direction of Engineer -in -Charge
-
-
-
25 mm dia
1
-
-
32 mm dia
1
-
-
50 mm dia
1
-
-
Providing, fixing, testing and commissioning of forged brass ball valve (PN 10) with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle withfemale BSP threads complete in all respects in all respect as per direction of engineer in charge in all respect as per direction of Engineer -in -Charge
-
-
-
15 mm dia
1
-
-
20 mm dia
1
-
-
25 mm dia
1
-
-
32 mm dia
1
-
-
Providing, fixing, testing and commissioning of cast iron wafer type butterfly valves (PN 16) as per IS:13095, with SS disc, shaft, seating rings, internal fastening, nitrile rubber lining, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the Project Manager.: 50 mm dia in all respect as per direction of Engineer -in -Charge
1
-
-
Providing, fixing, testing and commissioning of C.I. double acting air release valve of approved quality with bolts, nuts, rubber insertion, tail pieces, tapers, with ball valve etc. as required complete.: 25 mm dia in all respect as per direction of Engineer -in -Charge
1
-
-
Providing ,fixing, testing and commissioning of IP 67 (Weather Proof /Aluminum casing with positioner to indicate the valve position with key type manual overdrive) Motorized Butterfly valve / Ball valve of following dia with limit switch arrangement for filling of over head water tank complete with high and low level float type sensors to control the valve .The sensors shall be installed in over head tanks. The sensors will close the valve when water level is high in over head tank and open the valve when over head water tank level is low. The system should be complete in all respects with control panel indicating the position of valve i.e. open /closed with pressure switches at pump discharge, accessories like wiring / conduting / flanges, nut bolts etc. All the control switchgears, connections, wiring, integration etc. should be included in the quote. No additional payment shall be charge for any work against this item.: 25 mm dia in all respect as per direction of Engineer -in - Charge
1
-
-
Providing ,fixing, testing and commissioning of PVC / HDPE three layer UV protected Circualr tank with all required inlet, internconection outlet, drain provision as per requirement and direction of Engineer -in-charge.
-
-
-
2000 Ltrs
1
-
-
5000 Ltrs
1
-
-
WATER SUPPLY EXTERNAL
-
-
-
Providing,laying and jointing in position PE-80 HDPE pipe confirming to IS: 4984 and suitable working prssure of 12.5 bar and tested at 20 bar pressure with all fitting and accessories e.g - coupling, Tee, bends, reducer, flanged tail pieces etc jointing as per manufacturer specification/instruction. Cost shall inclusive of excavation upto required depth, filling sand alround, consolidation each deposited layer by ramming, watering etc, backfilling and disposing of surplus excavated soil as directed by Project Manager complete in all respect. (External Water Supply). in all respect as per direction of Engineer -in -Charge
-
-
-
25 mm Dia
1
-
-
50 mm Dia
1
-
-
65 mm Dia
1
-
-
Providing and fixing truck fill point consisting of 65mm dia. Water filling point with butterfly valve and NRV having 65mm dia brass plug including suitable locable housing of approved design in all respect as per direction of Engineer -in -Charge
1
-
-
Supplying, fixing, jointing and testing in position the following heavy class (Class C) GI pipes conforming to IS:1239 cut to required lengths including all necessary fittings (All fittings shall confirm to IS:1879 - part 1 to 10) and specials such as bends, tees, unions, reducers, flanges & plugs etc including testing of pipes at twice of working pressure. Cost shall be inclusive of providing two coats of synthetic enamel paint of approved shade on exposed pipes, over a coat of red oxide , primer. Cost shall also inclusive of excavation upto required depth, filling sand alround, consolidation each deposited layer by ramming, watering etc, backfilling and disposing of surplus excavated soil as directed by Project Manager complete in all respect. ( For Garden Hydrant) in all respect as per direction of Engineer -in -Charge
-
-
-
25 mm dia
1
-
-
50 mm dia
1
-
-
Providing and fixing ball valve (PN 10) with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle withfemale BSP threads complete:in all respects: 25mm dia nominal bore in all respect as per direction of Engineer -in -Charge
1
-
-
Providing and fixing 20 mm brass QRQC hydrant valve with PVC lid complete in all respects.
1
-
-
Providing and fixing 20 mm brass keys for hydrant valve complete in all respects.
1
-
-
Providing, fixing, testing and commissioning of cast iron double waffer type flanged butterfly valves (PN 16) as per IS:13095, with SS disc, shaft, seating rings, internal fastening, nitrile rubber lining, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the Project Manager.
-
-
-
50 mm dia
1
-
-
65 mm dia
1
-
-
Constructing masonry chamber with 75 class designation bricks in cement mortar 1:5 (1 cement : 5 coarse sand) for ball valve with CI surface box 100 mm top dia 160 mm bottom dia and 180 mm deep (inside) with chained lid and RCC top slab 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1 : 5 : 10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement and outside plaster finished rough complete as per standard design, including fixing of SFRC heavy duty Manhole cover and frame in 150 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) including centering, shuttering, excavation, refilling and disposal of surplus earth as directed complete in all respects. (Include the cost of Manhole cover and frame): Inside size 450 x 450 mm & 600 mm deep in all respect as per direction of Engineer -in - Charge
1
-
-
Providing & fixing digital type water meter with direct reading dial in KL with all internal parts in gunmetal or brass, butterfly valve, strainer, flanged distance piece for easy removal in future, Bourden type pressure guage and isolation cock including necessary test certificate for the meter from local municipal authorities in all respect as per direction of Engineer -in -Charge
-
-
-
50 mm dia for Domestic Water Supply Riser
1
-
-
50 mm dia for Municipal Inlet & Irrigation Water Supply
1
-
-
Providing, fixing, testing and commissioning of multistage, horizontal/vertical, centrifugal, 2 pole, 50 HZ, AC pumps incorporating C.I. casing and frame, stainless steel shaft, bronze / SS impeller, TEFC induction motor directly coupled to the pump, IP44 protection, class B insulated, C.I. body, hydraulically and dynamically balanced to give vibration free operation, with mechanical seal arrangement, fixed on a base plate with suitable vibration eliminator pads complete with level controller, electrical control panel / starter panel, necessary wiring / Cabling, pressure gauge, valves, vibration eliminators on the delivery side and strainer on suction side, including non-return valve and isolating valves on suction and delivering sides as required, including suction, delivery headers and interconnecting piping (G.I. Heavy Class) complete in all respects in all respect as per direction of engineer in chanrge
-
-
-
Domestic Trasfer Pumps For Overhead Tank Filling; Flow rate (each) = 2.0 M3 /hr; Pumping Head = 35 m; 1 Set (2 Nos Pumps. 1 Working + 1 Standby); Location : Plumbing Plant Room
1
-
-
EXTERNAL SEWAGE & DRAINAGE WORKS
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc including excavation for socket and dressing of sides ramming of bottoms depth in all lead and .lifts including timbering, shuttering, centering etc. as required getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil within the site premises as specified complete in all respect as per direction of engineer in charge
1
-
-
Providing and laying non pressure NP2 class RCC pipes S & S jointed with stiff mixture of cement motrar in the proportion of 1 : 2 (1 cement : 2 fine sand) including testing of joints etc. complete in all respect as per direction of Engineer -in -Charge.
-
-
-
150 mm dia
1
-
-
200 mm dia
1
-
-
250 mm dia
1
-
-
Providing and laying cement concrete 1:5:10 (stone agg. 40 mm nominal size) in bedding & haunches of RCC pipes in all respect as per direction of Engineer -in -Charge
-
-
-
150 mm diameter RCC Pipe
1
-
-
200 mm diameter RCC Pipe
1
-
-
250 mm diameter RCC Pipe
1
-
-
Providing & fixing square-mouth uPVC gully trap complete with grating, brick masonry chamber with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 coarse sand) inside plaster above trap 12mm thick m cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement outside plaster 12mm thick in cement mortar 1 :3 ( 1 cement : 3 coarse sand) 10cm thick foundation concrete 1 : 5 : 10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) space between chamber, and trap filled with cement concrete 1:2:4 (1 cement : 2 coarses and : 4 graded stone aggregate 20 mm nominal size) and water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than
2.70 kg asper standard design in all respect as per direction of Engineer -in -Charge
-
-
-
Providing & fixing 300 x 300 mm gully trap chamber with 150 x 100 mm 'P' trap with water tight C.I. cover with frame 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.7 kg as per standard design in all respect as per direction of Engineer -in -Charge
1
-
-
Constructing brick masonry road gully chamber 450 x 450 x 600 mm wtth bricks of class designation 75 in cement mortar 1:5 (1cement : 5 coarse sand), inside cement plastering 12mm thick with cement mortar1 : 3 (1 cement: 3 coarse-sand) finished witha floating coat of neat cement, outside plaster 12 mm thick in cement mortar 1 : 3 (1 cement : 3 coarse sand) 10 cm thick foundation concrete 1 : 5 : 10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) including 500x450 mm RCC horizontal grating wilh frame fixed in15cm thick cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) including excavation, refilling and disposal of surplus earth as directed by PMC complete as per standard design in all respect as per direction of Engineer -in -Charge
1
-
-
For depth of road gully chambers 450 x 450 mm beyond 600 mm in all respect as per direction of Engineer -in -Charge
1
-
-
Constructing brick masonry rectangular type manhole with sewer bricks conforming to IS 4885 in cement mortar 1 : 5 (1 cement : 5 coarse sand) inside cement plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, outside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand) foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). RCC top slab with 1 : 2 : 4 mix and making necessary channels in cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), inside finished with a floating coat ot neat cement including excavation, refilling and disposal of surplus earth as directed by Project Manager complete as per standard design.900x800mm upto 1500mm deep with ISI marked steel fiber reinforced concrete (SFRC) manhole cover and frame having hold fasts (Heavy Duty HD-20) 560 mm internal diameter in all respect as per direction of Engineer -in -Charge
1
-
-
RAIN WATER HARVESTING SYSTEM
-
-
-
Construction of rain water harvesting size 3m dia x 3.5m effective depth for the re-charging of storm water run off including the civil work with following specification [Construction of Chamber].DE-SILTING CHAMBER: Providing and constructing mansonary de-silting chamber 2000mm x 1500mm with 1.0 m effective depth inside with 75 class designated brick work in cement mortar 1:6 (1cement : 6 fine sand) with C.I double seal heavy duty 560mm dia manhole cover (2 Nos.). top slab 1:2:4 mix (1cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size) with minimum 1.5% reinforcement, foundation concrete 1:5:10 (1cement : 5 fine sand:10 grade stone aggregate 20mm nominal size including baffle wall, necessary excavation, back filling and disposal of surface earth. Complete with inlet, outlet and overflow arrangement. Foot rest @400mm c/c, grating of required size with 16mm sq.bars and frame @20mm clear spacing fixed at month of pipe as per site conditions and direction of Project Manager ; DRILLING: Drilling percolation borehole 200mm dia with reverse rotary method in all types of soil upto 40mm depty including cost for mobilization of rig and making good the area upon completion of work. Contractor shall arrange for all necessary tools, water and consumable and laying for drilling; Providing and laying pea gravel all around the casing pipe; 160 mm dia slotted UPVC pipe of 6 Kg/cm2 - 35 m -40m or as per site sub-strata or set as per direction of Project Manager; 160 mm dia UPVC blind pipe of 6 Kg/cm2; RAIN WATER HARVESTING WELL FILTRATION CHAMBER: Providing and constructing rain water harvesting well/filtration chamber of size 3m dia x 3.5m eff. depth inside with 75 class designated brick work in cement motor 1:6 (1cement : 6 fine sand) with 560mm dia C.I double seal medium duty manhole cover with top slab 1:2:4 mix (1cement : 2 course sand :4 graded stone aggregate 20mm nominal size) with minimum 1.5% reinforcement , foundation concrete 1:5:10 (1cement : 5 fine sand and 10 graded stone) aggregate 20mm nominal size including 300mm duty. Boulder 10-20mm, 300mm duty, gravel 5-10mm size, 300mm depth coarse sand 1.5-2.0mm including necessary excavation, back filling and disposal of surface earth complete with inlet, outlet, overflow arrangement pvc coated Foot Rest, 100mm dia deep holes @500mm c/c to be provided 1200 c/c above the bottom of wall, 100mm C.I vent pipe -2m height with cowls lncluding cost of excavation, back filling and all other operations necessary for completing the job in all respect as per direction of engineer in charge
1
-
-
Providing and constructing Soak pit (2.0 Mtrs. Dia) with septik tank of size 3.0 m x 2.0m and eff. depth 2.0 m inside with 75 class designated brick work in cement motor 1:6 (1cement : 6 fine sand) with 3 Nos. 560mm dia C.I double seal medium duty manhole cover with top slab 1:2:4 mix (1cement
: 2 course sand :4 graded stone aggregate 20mm nominal size) with minimum 1.5% reinforcement , foundation concrete 1:5:10 (1cement : 5 fine sand and 10 graded stone) aggregate 20mm nominal size including necessary excavation, back filling and disposal of surface earth complete with inlet, outlet, overflow arrangement pvc coated Foot Rest, 100mm C.I vent pipe -2m height with cowls in all respect as per direction of Engineer -in -Charge
1
-
-
Electrical items (Temporary Worker shed & Creche)
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point / with 1.5 sq.mmFRLS PVC insulated copper conductor single core cable in surface / recessed steelconduit, with piano type switch, phenolic laminated sheet, suitable size MS box andearthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required in all respect as per direction of Engineer -in -Charge
1
-
-
Providing & fixing LED bulbs 9W with approved quality and make including bulb holder in all respect as per direction of engineer in charge .
1
-
-
Switch board with 5 AMP 3 pin sockets & switch control
1
-
-
Prefabricated Mobile Toilets
1
-
-
Prefabricated Mobile Toilet( Economy 10 Seater Capacity, with sizes 5.50m x2.70m 3.0 height from Ground. Frame, Pillars, Ladders & railing make SS. Roof door panels are made of FRP. Unit fixed on wheels for easy movement at Sites as per requirement in all respect as per direction of Engineer -in - Charge
1
-
-
Galvanized structural steel plate 200mm wide 6 mm thick 24m long in all respect as per direction of engineer in charge .
1
-
-
Painting
Lettering with paints of approved brand and manufacture with readymixed paint (other than white) letters/figures of 15 cm height in all respect as per direction of engineer in charge .
1
-
-
Painting two coats (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt, dust and other foreign matters: Enamel white paint complete in all respect as per direction of engineer in charge .
1
-
-
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5kg. I.S.I. Marked in all respect as per direction of Engineer -in -Charge
1
-
-
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 9.0 Kg ISI Marked. in all respect as per direction of engineer in charge .
1
-
-
Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.: Capacity 22.5 kg in all respect as per direction of engineer in charge .
1
-
-
Supplying and installing at approved location approved make fire buckets of 24 gauge galvanized steel sheet, standard 9 liters capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer with stand in all respect as per direction of Engineer -in -Charge
1
-
-
providing and fixing of Safety siren/ alarm (at admin building) in all respect as per direction of engineer in charge .
1
-
-
Providing, fixing, testing and commissioning of multistage, horizontal/vertical, centrifugal, 2 pole, 50 HZ, AC pumps incorporating C.I. casing and frame, stainless steel shaft, bronze / SS impeller, TEFC induction motor directly coupled to the pump, IP44 protection, class B insulated, C.I. body, hydraulically and dynamically balanced to give vibration free operation, with mechanical seal arrangement, fixed on a base plate with suitable vibration eliminator pads complete with level controller, electrical control panel / starter panel, necessary wiring / Cabling, pressure gauge, valves, vibration eliminators on the delivery side and strainer on suction side, including non-return valve and isolating valves on suction and delivering sides as required, including suction, delivery headers and interconnecting piping (G.I. Heavy Class) complete in all respects. - in all respect as per direction of engineer in charge .
-
-
-
Domestic Trasfer Pumps For Overhead Tank Filling; Flow rate (each) = 2.0 M3 /hr; Pumping Head = 35 m; 1 Set (2 Nos Pumps. 1 Working + 1 Standby); Location : Plumbing Plant Room in all respect as per direction of engineer in charge .
1
-
-
Making connection of Municipal water line with existing Muncipal line including excavation, construction of valve chamber & making good the walls, floors, road etc. Proper water proofing to ensure no. ground water seepage in the manhole: For upto 100mm dia pipe in all respect as per direction of engineer in charge .
1
-
-
Escape signs
1
-
-
Fire signs
1
-
-
General signs
1
-
-
Supply and installation of 48 mm thick steel door shutter of 60 min fire rated confirming to BS-476, Part-22 and IS:3614part-II; abricated with 2 Nos. of 1mm thick galvanisedsteel sheet Size 1200 X 2380 MM S/L Sq. mtrs 8.568 with 202 grade SS ball bearing hinges (100x75x3 mm ) Assa Abloy, Fire rated door closer (standard arm) Assa Abloy, 60 min fire rated cleared wired glass (150X750X/7.3 MM), 202 grade SS back to backdoor handle (250 mm) Assa Abloy, Dead lock with
70 mm cylender Assa abloy complete in all respect to the satisfaction of Engiineer In- charge.sandwitching honeycombmaterial in between. Door frame are manufactured with 1.25 mm thick galvanised steel sheet pressed to formdouble rivet profileof size 143x60 mm. The frame and shutterare finished with powder coated in all respect as per direction of Engineer -in -Charge
1
-
-
Internal & External Works
-
-
-
PVC INSULATED HEAT RESISTANT FLAME RETARDANT AND LOW SMOKE (HRFRLS) COPPER CONDUCTOR WIRING IN PVC CONDUIT.Wiring for light point / fan point / exhaust fan / call bell point with 1.5sqmm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required: Group C
1
-
-
Wiring for twin control light point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sqmm FRLSPVC insulated copper conductor single core cable etc as required.
1
-
-
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
1
-
-
Wiring for power plug with 2x4 Sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC Conduit along with 1 No.4 Sq.mm.
HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
1
-
-
Wiring for power plug with 4x4 Sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC Conduit along with 2 No.4 Sq.mm.
HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
1
-
-
Wiring for circuit/sub-main with following size pvc insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface / rccessed PVC conduit along with 1 No.
HRFRLS/PVC insulated single core copper conductor cable of same Size for earthing as
-
-
-
2x1.5 Sq mm (For Light CKTs / Secondary Light Point)
1
-
-
2x2.5 Sq mm (For Chamber Light)
1
-
-
Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke sirgle core (flexible) copper conductor cable in surface / recessed PVC conduit along with 2 No.10 Sq.mm. (4x10 + 2x10) HRFRLS/PVC insulated single core copper
1
-
-
Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke sirgle core (flexible) copper conductor cable in surface / recessed PVC conduit along with 2 No.16 Sq.mm. (4x16 + 2x16) HRFRLS/PVC insulated single core copper
1
-
-
SUPPLYING AND FIXING PVC CONDUITS: Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and maing good the same in case of recessed conduit as required :50 mm dia
1
-
-
SUPPLYING AND FIXING METAL BOXES: S/F Metal boxes following sizes (nominal size) on surface or recessed suitable for fixing phenolic laminated sheet cover in front including painting etc. as as required:
-
-
-
200mm x 150mm x 75mm deep
1
-
-
250mm x 300mm x 100mm deep
1
-
-
ERECTION OR FITINGS AND ACCESSORIES: Supplying and fixing GI Modular box of (100mmx75mmx50mm) size with modular plate and cover in recess including providing and fixing pin 5/6 amps modular socket, outlet and 5/6 amps modular switch connections etc. as required.
1
-
-
Supplying and fixing G.I. Modular box of (100mmx75mmx50mm) size with modular plate and cover In recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch connections etc. as required.
1
-
-
Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required.
1
-
-
Supplying and fixing bakelite batten/angle holder including connections etc as required:
1
-
-
Supplying and fixing GI Modular box of (75mmx75mmx50mm) size with modular plate and cover in recess including providing and fixing pin 5/6 amps modular switch, connections etc. as required.
1
-
-
Supplying and fixing GI Modular box of (100mmx75mmx50mm) size with modular plate and cover in recess including providing and fixing pin 5/6 amps modular 2way switch, connections etc. as required.
1
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm
1
-
-
32 mm
1
-
-
40 mm
1
-
-
415V SWITCHBOARD , 1000Amp Aluminium Busbar, With 2Nos Incomer EDO FP 50KA ACB 1000Amps One for Transformer supply & Other for DG Incomer each with LSIG Protection, Multifunction meter, with minimu On,Off,Trip,Spring Charge, R,Y,B Indication, TNC Switch. Outgoing as follows:
630A FP MCCB, 36KA-1Nos
160A FP MCCB, 36KA -2Nos
100A FP MCCB, 25KA-8Nos
63A FP MCCB, 25KA-8Nos
32A FP MCB, 10KA-16Nos
With APFC of 275KVAR with Automatic power factor correction relay, Incomer shall have Auto Transfer function & DG Controlling relay for Auto Start/Stop of Diesel Generator.
1
-
-
Dry Type Distribution Transformer of 630KVA, 11/0.433KV,DYN11 suitable for outdoor mounting on double pole structure, with Isolator switch.
1
-
-
Diesel Generator 600KVA, 415V, 50Hz , With Canopy , Day Fuel Tank, Chimney etc complete in all respects.
1
-
-
METAL BOARDS FOR SWITCH GEAR MOUNTINGS: Supplying and erection of following depth, sheet metal cubical pedestal of suitable' dimensions 'with plus-minus 5 cm variation, made from 1.6 mm thick. MS sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement with sufficient. No vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15cm high from ground level and 45cm thick. The cubical pedestal shall be 15cm from the top of cement concerete platform. 300 mm deep (nominal)
1
-
-
SUPPLYING AND FIXING OF BUS BARS IN THE EXISTING CHAMBER / CUBICAL Copper Busbar-
Supplying and fixing copper strip bus-bars suitable for 200A 415V capacity 4No. Each of cross-sectional area (25.4mm x 4.75mm), in each existing enclosure or cubical with all accessories including
2.2
-
-
MOULDED CASE CIRCUIT BREAKERS AND AIR CIRCUIT BREAKERS: Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubical panel making connections, etc. as required
-
-
-
63A / 40A - 16KA
1
-
-
160A - 16KA
1
-
-
MINIATURE CIRCUIT BREAKES / RESIDUAL CURRENT CIRCUIT BREAKERS: Supplying and erection of 6 amps to 32 amps rating, 10KA breaking capacity, 240V, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections
-
-
-
Single Pole Cat-A
1
-
-
Double Pole Cat-A (20A)
1
-
-
Triple Pole Cat-A (32A)
1
-
-
Supplying and fixing 20 amps, 240 volts, SPN moulded type, socket outlet, with 2 pole and earth, enclosed plug top along with 20 amps "C" curve, SP, MCB, in moulded enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
1
-
-
Supplying and erection of 40/50/63 amps rating, 10KA breaking capacity, 240V, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections: Triple Pole & Neutral Cat-A (63A)
1
-
-
Supply and fixing 30A 415V TPN industrial socket outlet, 4-pole and earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 30A TPN-MCB on surface or in reecss, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.
1
-
-
MCB DISTRIBUTION BOARDS: Supplying and fixing of following way single pole and neutral sheet steel MCB dislribution board 240V on surface / recess complete with tinned copper bus. bar. wire-set, neutral link. earth bar, din-bar, detachable gland plate, cable. identification labels interconnections phosphatized and powder painted including earthing as required. Double Door-6 Way
1
-
-
Supplying and fixingof following way triple pole and neutral. sheet steel MCB dislribution board. 415V on surface / recess. with provision for 4. pole MCB/lsolator/RCCG/RCBO as incomer and sr MCBs as outgoing, complete with tinned copper bus. bar. wire-set, neutral link. earth bar, din-bar, detachable gland plate,
cable. identification labels interconnections phosphatized and powder.Double Door-4 Way (8+12) horizontal
1
-
-
EARTHING AND LOOP EARTHING:
-
-
-
GI Electrode Earthing with 80 mm dia and 3 meter length, The electrode should be hot-dip galvanized with 120-150 micron. The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 50 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-friendly and having RoHs certification
.GI Electrode Earthing should be maintenance free and dose not required regular manual addition of water. GI Electrode Shall be tested from CPRI.The earting pit should be cover with FRP cover, of 300 x 300 mm.GI Electrode earthing should be as per approved list of makes.
1
-
-
Supplying and fixing 25mm x 5mm copper strip on surface or in recess for earthing connection etc. as required
1
-
-
Supplying and fixing 25mm x 5mm GI strip on surface or in recess for earthing connection etc. as required
1
-
-
LIGHTENING CONDUCTOR: Providing and fixing of Lightning conductor finial, made of 25mm dia 300mm long GI tube, having single prong at top, with 85mm dia 6mm thick GI base plate including hole etc. complete as required.
1
-
-
Riveting, sweating and soldering of copper / GI tape with another copper / GI tape base of the finial or any other metallic object as required.
1
-
-
Supply and fixing GI tap 20mmx3mm thick on parapet or surface of wall for lightening conductor as required (for vertical run)
1
-
-
Supply and fixing GI tap 20mmx3mm thick on parapet or surface of wall for lightening conductor as required (for horizontal run)
1
-
-
Supplying and laying of GI tape 32mmx6mm thick from earth electrode to directly in ground as required.
1
-
-
UNCLASSIFIED ITEMS: Providing and fixinng MV danger notice plate of 200mm x 150mm made of mild steel at least 2mm thick and vitreous enameled white on both sides and with inscription in signal red color on front side as required
1
-
-
ALUMINIUM CONDUCTOR PVC INSULATED ELECTRIC ARMOURED CABLES: Providing, laying and
fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured / XLPE power cable, working voltage 1100V grade on surface etc. of the required size
-
-
-
Armoured Cable 6sqmm (twin core)
1
-
-
Armoured Cable 70sqmm (3.5 core)
1
-
-
Cu cable Armoured Cable 35 sqmm (3.5 core)
1
-
-
PROVIDING AND INSTALLATION OF CEILING / EXHAUST FANS: Providing and installation of exhaust fan of following sizes in the existing opening, including' making the hole to suit the size of the above fan. making good the damages. connections. Testing and commisslonina etc as reauired: Exhaust fan, heavy duty 380mm sweep including suitable Louver
1
-
-
SUPPLYING AND FIXING OF WALL BRACKETS / CEILING FITTINGS: Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder(s), complete with all accessories but excluding CFL lamp including making connections. testing etc as required: Bulk Head Fitting, CFL type (Category - A)
1
-
-
Supply and erection of Poles: Supplying and erection of street light bracket made of GI pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt and nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over prming coat complete in all respects as required. 40mm dia GI pipe heavy class
1
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of up to 150 sqmm size in the existing RCC/ HUME/ METAL pipe as required. (Laying of MV Cables)
1
-
-
CABLE TRAY AND RACE WAY: Supply, laying & fixing 14 SWG single compartment GI race way of following sizes along-with necessary cable support system as directed including fixing accessories like dash fasteners cable ties and junction box etc. complete in all respects including earthing of trunking with 4sqmm. PVC insulated wires including cutting chasing of floor and making of good (cutting of floor by machine).GI Race ways shall be minimum 20mm below floor finish as required as per approved drawings, specifications of this tender and directions of Project Manager.
1
-
-
40x 300 x 50mm deep
1
-
-
50 x 225 x 50mm deep.
1
-
-
Supplying & installing following size of perforated pre-painted M.S cable trays with perforation not more than 17.5%, in convinient sections,joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required.
1
-
-
600 mm width x 62.5 mm depth x 2.0 mm thickness
1
-
-
450 mm width x 62.5 mm depth x 2.0 mm thickness
1
-
-
DISTRIBUTION BOARD & 3 PHASE METER & SUB MAIN DISTRIBUTION BOARD (SMDB): Supplying and
fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board double door of sheet steel, dust protected, duly powder painted, inclusive of 80 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, with provision of 40A / 63A TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars ( with 6 MCB’s/ MCCB) as required.
-
-
-
12 Way TPN DB Double Door (Vertical)
1
-
-
S/I/T/C sheet steel inclosure for 32-63Amp TPN MCB complete with all accessrories as required.
1
-
-
MULTIFUNCTION METER: S/I/T/C 3 Phase Multifunction Meter, L&T, 4410 LED, Class 0.5 with RS 485 along with 3 Nos. CTs of 100/5A Class-I and 3 phase indicator lamps, internal wiring with copper flexible wire, all connections, testing, commissioning and other petty material required to complete the job including labour charges or erection in existing cubical panels with cost of cutting the panel sheet and din bars etc.
1
-
-
LIGHTING FIXTURES: Supply, Carriage, erection, testing and commissioning of LED fitting. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from NABL I UL accredited laboratory for LM79 & LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor 0.9, THD 10%. The sample of fitting shall be got tested in the presence of representative from NABL I UL accredited laboratory and the testing fee shall be borne by the contractor / supplier.
-
-
-
S/E of 40W LED Liner fitting surface mounted. made of extruded aluminium heat sink body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230V, 50 HZ supply, high efficent fixtures complete in all. The job includes cost of cutting the false ceiling to fix the fitting including giving support of chain from ceiling or frame and making connection to the nearest point with copper wires.
1
-
-
S/E of 40W LED Liner fitting surface mounted. made of extruded aluminium heat sink body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230V, 50 HZ supply, high efficent fixtures IP65 complete in all. The job includes cost of cutting the false ceiling to fix the fitting including giving support of chain from ceiling or frame and making connection to the nearest point with copper wires.
1
-
-
S/E of Surface Mounted LED 40 W Fitting Panel of size 4' foot long complete with driver. The fitting is to be fixed on ceiling with anchor fasteners.
1
-
-
S/E of Self contained with 8W fluorescent tube for non maintained emergency lighting for 3 hours duration Complete as required.
1
-
-
S/E of 230/48Volts 440AH ,Battery charger with rectifier, DC Ammeter, DC Voltmeter and common DC bus for DC supply to battery.
1
-
-
12W LED round fitting recess mounted. The The job includes cost of cutting the false ceiling to fix the fitting including making connection to the nearest point with copper wires.
1
-
-
S/I/T/C of LED street light light fitting of 70W / 72W rating with minimum 110 lumens per watt. The fitting is to be fixed on existing bracket mounted on Pole. The job includes cost of fitting, wiring connection etc. required to complete the job.
1
-
-
Supply ,Fixing, testing and commissioning of internal road light poles including the cost of providing top 70mm and bottom 130mm dia 3 mm thick 200x200x12mm MS base plate welded to the base of the pipe , Arm Length 1000mm and including digging and including the cost of masonry base pedestal built with 1:3:6 concrete (1 cement, 3 coarse sand and 6 graded stone aggregate 40 mm nominal size) provided with a 200 mm x 150 mm x 100 mm deep looping cable GI box recessed in the base pedestal / surface mounted fabricated from 14 SWG GI sheets with hinged gas kitted lockable door, terminal block for incoming and outgoing PVCA cables, 10 amps SP MCB, 2 Nos. suitable length 25mm dia GI pipe for incoming and outgoing cables and including the cost of painting, wiring, in pole from terminal block up to the light fittings with 2 x 2.5 sq.mm copper conductor 1100 volt grade PVC insulated wires along with loop earthling with 1 no. 8 SWG GI wire, earth stud etc. complete as required and as below. IS2713-PART II. 6
mtr Long Swaged Pole. Planting depth shall be 600 mm. Height above ground shall be 5.4 metres including MCB & M.S. box etc. as required.
1
-
-
S/I/T/C of LED street light light fitting of 25W rating with minimum 110 lumens per watt. The fitting is to be fixed on existing bracket mounted on wall. The job includes cost of fitting, wiring connection etc. required to complete the job. Wall mounted fixture
1
-
-
Supply, installation, testing and commissioning of Addressable type fault isolator for isolating shorted, dewired and loose circuits between two successive fault isolators with automatic resetting arrangement (base model).
1
-
-
Supply, installation, testing and commissioning of Addressable control relay modules for AHU & stairs Pressurization Fan.Hooter and manual call point etc.
1
-
-
Supply, installation, testing and commissioning of Hooter/Strobe Lights with 110 cd. The strobes shall be synchronized for better evacuation.
1
-
-
Supply and laying of 2 Core, 1.5 Sq. mm twisted pair copper conductor cable, low smoke zero halogen, high performance silicon rubber insulated, overall shielded, sheathed fire survival (HPSR) armored cable on surface/ recess/ existing couduit/ existing cable tray complete in all respect as per BS 6387 CWZ, EN50200, LPCB approved for the same size.
1
-
-
Supplying, installing, testing and commissioning of Analog Addressable air duct smoke detector with an efficient housing design and sampling tubes mounting based LED, Address Switch to programme the detectors, complete as required. (FOR AHU's).(It shall be UL/FM Listed)..
1
-
-
CCTV SYSTEM:
-
-
-
Supply Installation testing commissioing of 540 TVL Day/Night Dome cameras with sensitivity of minimum
1.6 lux (Color) and 0.01 lux(B&W). The cameras shall use the1/3-inch interline transfer CCD sensor and shall have a 2.8 to 12mm varifocal lens. The Cameras shall be EN/UL Listed asper the specifications -(in P
& G area , Lift Lobby and admin office)
1
-
-
Supply Installation testing commissioing of 540 TVL CCD Camera with minimum lux level of 0.01 lux. The cameras shall use 2.9 to 8mm varifocal lens. Electronic Shutter range of 1/50 - 1 / 100,000 sec. The Cameras shall be EN/UL Listed asper the specification-( pasage)
1
-
-
Supply Installation testing commissioing of 540 TVL CCD True Day/Night Camera with minimum lux level of
0.001 lux. The cameras shall use 2.7-13.5 mm varifocal lens. Electronic Shutter range of 1/50 - 1 / 100,000 sec. The Cameras shall be EN/UL Listed asper the specification.(External Perhaperi)
1
-
-
Outdoor Aluminium housing Small, Sleek, Contemporary Design High Reliability Die-Cast Construction Tamper-Proof Hardware, with Heater/Blower, Sun Shroud, Meets IP66 and NEMA Standards. UL,CE, FCC certified with Inbuilt power adapter for cameras asper the specification.
1
-
-
Supply, installation, testing & commissioning of UL listed DVR 16ch with 6Slots for HDD and DVD writer,Compression H.264,Outputs CVBS (BNC),HDMI, VGA ,4 audio input,Control RS 485 and RS 232,16 Alarm Input ,Video Output Loop Through,ESata connector for backup device,One front and one rear USB connector for mouse or USB memory device,Support Joystick Mode Manual, motion detection, scheduled,
alarm,Alarm handling Motion detection Supports NAS
1
-
-
Supply, installation, testing and commissioning RG11 Cable in existing Conduit/raceway/cable tray with clamp/sadles/tie as per technical specification etc complete ar required .
1
-
-
Supplying and fixing of 25 mm steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
1
-
-
SITC of 42" LED 1920 x 1080 HD Display System
1
-
-
UN- INTERRUPTED POWER SUPPLY
-
-
-
Supply, installation of 1 KVA UPS with 15 Minutes battery Backup at load using Sealed Lead Acid Maintenance Free batteries. Battery design life is 5-6 yrs.including with MS Racks for housing batteries, Battery Disconnector, battery to battery inter-links, Battery to UPS cable for a distance of 10 meters per UPS complet as required.
1
-
-
TPN ISOLATOR FOR GOODS LIFT
-
-
-
Supply, installation, testing and commissioning of Recessed 63A ,4Pole TPN isolator in powder coated, 1.6mm thick MS enclosure having facility for incoming and outgoing cables, set of ON/OFF/Trip indicating lamps shall be protected by control MCBs, complete with all materials and as per site requirement.
2
-
-
Other Necessary Items/Material
-
-
-
Any other item required for the Complete Execution of the Project including for the Trial Run of the Plant but not coveered (Please Specify). Tenderer to use extra Sheet for all the Items required for the Plant. Extra Sheet needs to be on the Agency's Letter Head.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements