Horticulture Planning And Marketing Department Tender

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All Works upto plinth level 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) including cost and carriage involved complete job

supply and filling of RBM including all leads lifts including consolidation complete in all respects

Providing and laying in position cement concrete reinforced of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level ThermoMechanically Treated bars of grade Fe-500D or m

Centering & shuttering including strutting, propping etc. and removal of form (12mm thick kit ply wood) for Foundations, footings, bases of columns shelves balconie slabs etc. for mass concrete..

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate

providing and fixing of 40 mm wide strips for flooring

Structural steel in single section with or without connecting plate including cutting hoisting fixing in position and applying a coat of approved steel primer followed by paint of approved brand and colour.including all sorts of carriage complete including priming painting complte in all respects

providing and fixing track High Rib sheets 1000 to 1020 mm cover with 28-35mm high crests at 250-255 mm TCT ( total coated thickness) high tensile SMP galvalume steel. This sheets shall have wide fans with 3 No. stiffing ribs effective water shedding and special male female ends with full return legs on side laps of purlins support and ant capillary flute inside lapp. The sheets shall have hot dip metallic coated of zinc aluminum (150gm/sqm) zinc/ aluminum coated mass total on both sides az-150 as is-1397,550 PMA , yeild stress. providing silicon modified polyester coating of approved color of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron pollster back coat on 5 micron primer coats on both surfaces including side and end lap and using 8mm galvalume hex self-drilling fastener on each crust of sheet for connection with purlins and seem bolts at 300mm centers on all side and end laps etc.(measured for unit of laid area ) complete. 0.50 mm thick high rib sheets

providing pre coated dalvainsed steel sheets roofting accessories (ridges ) plain 500 -600 mm white

providing and laying 15 mm cement plaster in 1:6 mix ( 1 cement 6 course sand ) complete

providing and fixing of ms bolts 25 mm dia , 450 mm long full thread for required length and fixed with holdfasts at base

providng and fixing of nuts of 25 mm dia

carriage for sand average of 12 km

carriage for Bajri average of 12 km

shifting of hoarding including dismentalling from existing place and reintallation at sutaible place including painting complete job

providing and fixing 30 watt flood lights including wiring conduits and providing fixing mcb and sockets boxes complete job with service line

cleaning of rabbish / vegetation from back side of shops incuding disposal of same away from mandi premises