Floriculture Department Tender

35 mm sq 4 core

16 mm sq 4 core

10 mm sq 4 core

10 mm sq 2 core

6 mm sq 2 core

Supply, installation and commissioning of ornamental decorative CI lamp post of Andythornton,Dwarika,Karare Mujassme,Pragati make as per Cat No: DLP-2-30-201 having base 15",3 mtr high,enamel coated with antique finish and PU coating as per sample,with pre inbuilt control gear box fitted with connector and 3 amp Mcb sp.The pole shall have to be erected on cement concrete block to be paid separately.

Supply and installation of CI decorative single arm bracket DBR-022,painted by an anti corrosive enamel paint and Pu coating as per approved design andythornton,pragati,Dwarika,Karare Mujassme make.

Placing and laying of cement concrete block in 1:2:4 mix,2ft underground and 1/2ft above ground,1.5 ft in dia including grouting of three No. foundation bolts,MS templates,MS/HDPE bends for inlet and outlet of cables,shuttering and curing complete.

Providing and fixing of LED bush/spike/shrub light including cement concrete block of desired mix as per integrated COB 12 W IP66 Philips or equivalent 31386.

Laying of cables partly through HDPE pipe,to be laid underground,the item includes the cost of earth work not less than 300 mm deepback filling and making the surface good but excl cost of cable but including cost of HDPE pipe.

38 mm dia

50 mm dia

providing and fixing of 30 Watt high efficiency LED flood light ( inc c/o cement concrete block) having 25 degree beam angle,6000K colour temp,30401 m output as per Cat No: FLEL32C60 Philips/CG/Syska/ Polycab( lightup) make.

Providing and laying of 1.5 mm sq PVC insulated 2 core copper wire for connecting the light fixtures,and flood light luminaries.

Design,fabrication,assembling,supply,installation and commissioning of feeder panel suitable for 415 V,3 phase,50Hz 4 wire power supply system with 100 Amp Al bus bar 3 phase as per requirement.Panels shall be fabricated out of 2mm thick CRCA sheet steel in cubical formation,compartmentalized in form 3b construction,floor mounting,free standing and dust and vermin proof complete of required size outdoor type lockable doors duly grafted in cement concrete. The items shall includide 100 AMP MCCB and 8 way MCB DB for main supply including 200 AMP four strip bus bar also including automatic timer with contactor of required capacity of Make Legrande/ Havells or equivelent.

Providing and fixing of following fixtures of ISI mark Legrande/Havells or equivelent make.

MCB 4 pole 63 Amp

MCB 2 pole 63 Amp

MCB 2 pole 40/32 Amp

MCB 2 pole 25 Amp

MCB 2 pole 16 Amp

MCB 10 Amp

providing earthing stations at locations as per requirement with 600 x600 x6mm thick G.I electrode and a mixture of salt and charcoal plate electrode complete.

providing and fixing of 25x3 mm GI strip and wires including providing of all fixing accessories and connections.

S/I/of acrylic globe luminaire Amphore 300 glowmac/Havells including c/o 12 watt LED lamp standard.

Supply,installation,testing and commissioning of 12.5 Mtr.long high mast ( octagonal) shaft totally hot dipped galvanized ( 85 microns confirming to IS 2629) through single dipped process and suitable for wind velocity of 180 Km/hr as per IS-875 ( part III).The single sectionmast shall have adequate size door opening at the base having anti vandal type locking arrangement and flush door construction.It should also include accessories for 12.5 Mtr high mast including head frame,steel wire rope 5mm dia ( 7x19 construction)with safety factornot less than 5 drum winch,galvanized lantern carriage way suitable for carrying 6 No. luminaries and its control. The mast should be provided with foundation bolts manufactured from special steel along with nuts,bolts,washers,anchor plates and templates.The mast shall have an internal type power tool mounted at the base compartment for its raising and lowering operation,complete with its operating mechanism,Philips/Bajaj/CG/Vipin/bbp make.

Construction of suitable foundation for high mast as per the approved design ( after obtaining soil test report) and site conditions including all material viz,steel,cement ( M20) mix min cement content 300 Kg/m3, 20/25 mm aggregate ,sand ,soling ( well compacted, consolidated,handpacked) inclusive of lean mudmat M 7.5 1:4:8 mix with n/s of agg. 40mm incl. cost of reinforcement Fe 500,cutting,bending,straightening and cost of binding wire,shuttering,de-watering,carriage of material and curing.( concrete work and reinforcement detailing as per IS-456 latest and SP-16 and IS-13893) complete. Errection of high mast by the help of suitable equipment,provision of earthing electrode and connection of high mast earth terminal with 25 x3mm GI strip complete.

Supply,installation,testing and commissioning of LED luminaire dia cast aluminium IP 65,200 W LED as per Cat No. LSFO-200-CDL/60 Philips/CG/Havells,polycablightup or eq make.

S/I/T/C of Al casting Bollard as per BGBOL-605 (9W) CAT No. 111282 Philips make or equivalent over a bed of cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 1’-6” dia 2’-0” depth with earth work excavation soling, mud mate with required size of nuts and bolts or as approved at site with HDFE bends, backelite connecors, MCB etc complete.

Construction of cement concrete bed of required size for installation of 250 Kva servo controlled voltage stablizer and panel in.1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) with earth work excavation , mud mate and concrete as per directions of site Engineer complete job.

Providing and laying of 10 SWG G.i wire feeder pillar to pole etc complete.

Design,fabrication,assembling,supply,installation and commissioning of main panel suitable for 415 V,3 phase,50Hz 4 wire power supply system with 600 Amp Al bus bar 3 phase ( outdoor type double door ) as per requirement.Panels shall be fabricated out of 2mm thick CRCA sheet steel in cubical formation,compartmentalized in form 3b construction,floor mounting,free standing and dust and vermin proof incl.p/f of angle iron stand and cement concrete block. The item includes one No. 400 Amp MCCB (35KA) 4 pole, 8 No. MCB 160 Amp 4 pole (25KA), volt meter/MP meter with CT coils.

Supply,installation,testing and commissioning of three phase neutral 250 Kva 50Hz oil cooled ( transformer oil to be provided with thestablizer,confirming to IS 335,IEC 296) unbalanced type servo voltage stablizer( confirming to IS 981) Alba/electric field/Cosco make,having an input line voltage from 110v to 270v ( phase to neutral) and balanced output voltageof 220v +/-5% ( test certificate to be provided by the manufacturer ) the unit further incorporates the following:- (a) 0-500 v moving iron type voltmeter with the selector switch. (b) A three phase changeover switch to read voltage on incoming and output side. (c.) indicating lights 6 No's two numbers for each motorized units,one for lower limit and other for higher limit. (d) Six push button control for movement operation of three motorized dimmer units tow for each unit i.e one for the raise operation and one for lower operation under the conditions of adjustment of auto/manual selector switch (DPDT) (e) Single phase preventer (contractor switch) Legrand make. (f) six potential meter resistance with lock meter two for each phase control,one for sensitivity and other for level control. (g) Two sets of indication lamps three numbers each to indicate output and input indication. (h) 20% over load bearing capacity for one hour complete. Note:- All above items are complete with all carriages of materials in all respects. Nothing extra will be paid for said items.