Floriculture Department Tender

(Air Walker): - Providing, designing and fixing of air swing in pair of size 1100x550x1480mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia all pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated .All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety . The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. (Item as per LMR)

(Horse Rider Station) : Providing, designing and fixing of horse rider station of size 1000x600x1200 mm fabricated with main post of 114 mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made from plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety . The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix theequipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material,shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. (Item as per LMR)

(Leg Press) : Providing, designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. (Item as per LMR)