Custodian Evacuee Property Tender

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix all complete all works upto required level

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size all complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level

Labour engaged for reerecting of columns and gate for making necessary holes for grills in stairs including repositiomimg of W.C all job complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate all complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto required level using 1:2:4 (1 cement : 4 coarse sand : 4 graded stone aggregate 20 mm nominal size

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 11.51.1 In colour such as White, Ivory, Grey, Fume Red Brown as per Engineer in Charge

CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates (subject to actual weight as per site)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separatel

P/Fixing Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge (glazing, panelling and dash fasteners to be paid for separately. For fixed portionPowder coated aluminum (minimum thickness of powder coated 50 microns)

P/f of Wash Basin with pedestal all complete job 2x1.5 feet avg of approved barand and manufacture as per Engineer in Charge

P/F CP angles valves all complete job of approved brand and manufactre

P/F CP bib cock long nose off approved brand and manufacture as per Enginner in charge

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Avg 1mm thick

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two or more coats as requried

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on steel work for two or more coats applied

Painting with synthetic enamel paint of approved brand and manufacture on steel work to give an even shade. Two or more coats on work all complete

p/f of glazing in between the shutters avg 4 mm thick as per Engineer in Charge

P/F of 2.5 mm thick ACP sheet for door all complete job

Removal of mud mulba during execution including loadin unloading and dumping of debris to dumping ground beyond 10 km limit all complete job to be paid as per actual on site by means of animal transport/mech transport