Border Security Force Tender

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 6 sq. mm

Supplying and fixing of 20mm sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. As required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and Commissioning etc. as required.

Single pole

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt etc. As required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 x 35 sq. mm (25mm)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Supplying ,installation, testing and commisioning of 20 watt 6500 K LED lighting fixture with extruded polycarbonate , surface mounted, environmental friendly, energy efficient ready to use pack complete with all accessories directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Make:- Havells/ Philips / Crompton )

Providing and fixing of 45 watt environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. suitable for dia Ø 32 mm G.I. pipe bend mount on wall (medium class) including wiring 3 x 1.5 Sqmm, FRLS, PVC insulated, single core, copper condoctor cable and clamping etc. as required.(Make:- Havells/ Philips / Crompton )

Supplying and Laying of one number XLPE insulated, cores laid up, PVC innersheathed armoured power cable of 1.1 KV grade armoured UG electric cable with aluminium conductor of size 2x35 sq.mm. as per IS 7098(Part1) 1988 with upto date amendments direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering.(Make:- Havells/Polycab/Plaza/KEI /finolex/Gloster)

Supplying and Laying of one number XLPE insulated, cores laid up, PVC innersheathed armoured power cable of 1.1 KV grade armoured UG electric cable with aluminium conductor of size 2x35 sq.mm. as per IS 7098(Part1) 1988 with upto date amendments on wall surface as requiured (Make:- Havells/Polycab/Plaza/KEI /finolex/Gloster)

Supplying and fixing of 100 Amps rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Fabrication of supplying installation testing and commisisiong of cubicle type floor mounted compartmentalised out door type double door weather proof main power cum control panel made out of not less than 2mm thick CRCA sheet , should be painted with powder coat painting of approved shade (smoke grey) as per CPRI approved complete with locking arragement and keys as reqd ( desgin and fabrication of panel prior to approval of engr - in - charge before installation) ,steel having of size 900mmx1950mm with standard deep of 400mm one panel comprising 200 A TPN alluminum bus bar current density of 130A/sq.cm strip on SMC/DMC support,each bus bar shall be suitable insulated with PVCsleeves/tapes ,phase to phase clearnace :32 mm min,Phase indication lamp (R Y B ) and cable way with provision of fixing cable gland the bottom,air ventilation groves at the sides,insulators, earthing stunds,nuts and bolts etc and ,duly mounted on suitable size MS angle iron frame of MS channel base for grounting having size 50mmX50mmX5mm thick and 900 mm long iron angle , including providing of fixing of R Y B phase Indicatior lamp complete etc as requried with sweachgear accessories (i) 160 Amp 4 Pole 36 kA MCCB - 01 No. (ii) 100/63/40 Amp 2 Pole 36 kA MCCB - 11 No. .(as per CPWD specifications (Part IV Part-1 internal) Sub feeder