Border Security Force Tender

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.a) 2 x 10 sqmm. (19 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(a) 3x 1/2 x 25 sqmm. (28 mm)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (From Bus Bar to MCBDB) (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (From Bus Bar to MCBDB) (b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and Laying of one number 2 x 10 sqmm XLPE Insulated PVC Innersheathed, Armoured PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments, the following size in the existing masonry open duct as required.

Supplying and Laying of one number 3.5 x 35 sqmm XLPE Insulated PVC Innersheathed, Armoured PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments, the following size in the existing masonry open duct as required.

Supplying, Laying and fixing of one number 2 x 10 sqmm XLPE Insulated PVC Innersheathed, Armoured PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick G I saddle)

Supplying, Laying and fixing of one number 3.5 x 35 sqmm XLPE Insulated PVC Innersheathed, Armoured PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick G I saddle)

Supplying and Laying of one number 3.5 x 35 sqmm XLPE Insulated PVC Innersheathed, Armoured PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Supplying and Laying of one number 2 x 10 sqmm XLPE Insulated PVC Innersheathed, Armoured PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Supplying and fixing Bus bar chamber with 63 amps , 415 volts, 4 way 4 Nos Copper bus bars, Complete with connections, earthing the body etc. as required. Anchor make Item code 98382 or other equivalent Havells, Crompton, Phillips, Legrand.

Providing & fixing of Cable junction box of size-300mm X 260mm X 120mm (fibre reinforced plastic)with double pole MCB (SPN) C-32 Amp (Havells make) with din rail, terminals, fixing with suitable size screw/ washer & rawel plug including connections etc. as required. Make -Sintex.

Fabrication supply installation and commissioning of CPRI approved outdoor cubical hut type based Bus Bar/ junction Box made up of not less than 3.0 mm thick CRAC sheet done with 70 micron Powder Coating (RAL-7032) after 7 tank chemical pretreatment having depth of 300 mm (D) and 750 mm (W) x 500 mm (H) surface area excluding hut with 02 compartments having front openable doors supported on Stainless Steel 304 Brushed Finish Ball Bearing Hinge including suitable gasket and locking arrangements with IP55 protection grade and Alluminum(E91E Grade) 6P+2N with Current Density 0.8A/sq. mm -100 Amps with suitable insulation support, suitable holes for cable entry/ Exit, Junction Boxes shall be mounted on 40 mm x 40 mm x 6 mm thick G.I angle frame with four nos. 1 metre long legs and these legs to be grouted in suitable cement concrete foundation(1:3:6) etc as reqd.