Border Security Force Tender

Supplying and drawing of 1.50 sq. mm 3 Core PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 from top of the pole to the junction box ( Make like: Havells-WHMFDSKB31X0/ Anchor/ Polycab/ Finolex/ RR Kabel)

Supplying and making end termination with brass compression gland and aluminium lugs for following sizes of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 x 25 Sqmm (28 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following sizes of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 x 70 Sqmm (38 mm)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineerin charge. All kinds of soil

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Supplying & erection of 9 Mtrs long hot dip galvanized octagonal pole with base plate including RCC foundation and erection of the pole with galvanized nuts etc as required. The following specifications should be adhered for pole & accessories Model No HM79 70/155 mm foundation bolt M24 Make of CG/ Philips/Trilux/ :- a) Pole Top dia - 70 mm b) Pole Bottom dia - 155 mm c) Thickness of sheet - 3 mm, d) Base plate of size - 260mmX260mmX16mm e) single Arm Bracket made from flat GI Channel suitable for mounting 02 Nos 150 watt LED Flood lights f) Making arrangement for inlet & outlet cable for connections of LED light. g) Foundation bolts M24 including washers, plates i/c connection and interconnection & the pole shall be fixed using nuts etc. completed as required.

Supplying and installation Security light’s Cable junction Box of minimum IP66 grade having Size of 205 x 255 x 112 mm, weather proof for outdoor installation at the bottom part of the pole having an arrangement for 2 nos 3.5 x 25 sqmm cable entry including suitable GI clamps of size min 32 x 6 mm for mounting on pole with nut bolts gaskets and locking arrangements with suitable insulation support like 6 way DIN Rail - 01 Nos, 1, 6 AMPs SP MCB C series- 02 Nos, 4 Pole Copper Connector - 1 Nos and interconnection with 1.5 sqmm FRLS flexible copper cable etc as required.. (Make Hensal/Sintex)

Supplying, installation, testing and commissioning of 150 Watt LED integral type flood light, on 9 Mtr Octagonal Pole on bracket including making connections as required etc. (Make like: Crompton Code- LFLN-150-CDL/ 60-M / Havells – JETA IRIS FLS 150W LED 757P2AV2 WBLTG / Philips- BVP283 LED181 CW FG SY5WB 150W PSU SPD)

Supplying and Erection of following size swaged type steel tubular poles as IS : 2713 (part II) - 1980, including Pole bracket made of 40 mm dia GI Pipe (Medium Duty) 1.14 Mtr long along welded with 100 mm GI Pipe and nut bolt with suitable nut and bolt and having painted with 2 coats of anti –corrosive primer and 2 coats of aluminum paints including Base Plate having size of 300*300*6mm in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation of size 450 x 450 x 1000 mm size after filling the cement concreate at a depth of 1.5 Mtr including excavation and refilling and installaion of IP66 Cable junction Box Size 205 x 255 x 112 weather proof make hansel for outdoor installation with the pole having an arrangement for 2 nos 3.5 x 25 sqmm cable entry, Junction box should be clamp with the pole of 32 x 6 mm GI Strip and Nut and bolt, Connection in junciton box should be made after fitting of suitable of copper connector, carrier plate,01 Nos 6/10 Amp MCB etc as required a) 410SP-17 ( overall length- 8.5 mtr, approx weight- 89 Kg + 4.5 Kg = 93.50 Kg)

Providing and fixing of Bracket for street light pole made of MS having 2 Nos 40 mm dia, 1.14 Mtr long along welded with 100 mm GI Pipe suitable for mounting of 2 nos. 45 Watt LED street ligjt on 8.5 meter long steel tubular poles having 2 no’s 18mm dia symmetrically located holes for multicore wire entry, Bracket having painted with 2 coats of anti –corrosive primer and 2 coats of aluminum paints etc as required.

Supplying and installaion of Street light IP66 Cable junction Box Size 205 x 255 x 112 weather proof make hansel for outdoor installation with the pole having an arrangement for 2 nos 3.5 x 25 sqmm cable entry including suitable GI clamp 32 x 6 mm for mounting on polewith nut bolts gasket and locking arrangements with suitable insulation support like 6 way DIN Rail - 01 Nos, 6 AMPs SP MCB C series- 02 Nos, 4 Pole Copper Connector - 1 Nos and interconnection with 1.5 sqmm FRLS flexible copper cable etc as required.etc as req. (Make Hensal/Sintex)

Supplying, installation, testing and commissioning of 45 Watt LED Street Light, on 8.5 Mtr MS Pole bracket including making connection as required. (Make like: Crompton Code- LSTS-45-CDL-M or similar make like Havells- ENDURA SUN DOWN SL 45W LED 765PASYBOTG /Philips - BRP331 LED54 CW R5N PC PSU S1 SPD)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

Providing and fixing 50 mm dia, PE-100, 6.0 Kg pressure HDPE pipe (in black color) for cable protection along with 8.5 meter high MS pole with suitable GI clamp of 32 mm x 6 mm GI strip to hold the 2 Nos PVC pipe with suitable size nut and bolt etc as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required i) 50 mm dia. G.I. pipe

Supplying, installation, testing and commissioning of Outdoor double door type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 3 mm thick CRCA sheet, with inbuilt locking arrangement, 3 mm pasivated gland plate, depth not less than 450 mm and all connection (incoming and outgoing) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 600 mm long legs, 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including providing and fixing following switchgear, fixing LED phase indicator and following accessories etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 30 cm above the ground level. The panel should not less than 600 mm x 600 mm x 450 mm as CPRI approved. Note:- (i) Panel size indicated is nominal. The actual size shall be as per the drawing approved by the Department. Incomer1 i) MCCB5 04 Pole 63 Amp 16 Ka, L frame, adjustable thermal and adjustable magnetic setting, = 01 nos with spreader terminals ii) MFM 4410 LED Meter CL 1.0 WC441010OOOO 9425 - 1 No. (Make: - Selec/ L&T) iii) LED Phase Indicating Lamps - 1 Set of 03 Nos. Outgoings i) 40 Amp TPN MCB = 04 nos

Supplying, installation, testing and commissioning of outdoor hut type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 3 mm thick CRCA sheet, double door type with inbuilt locking arrangement, 3 mm passivated gland plate, depth not less than 450 mm and all connection (incoming and outgoing) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 800 mm long legs, 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including providing and fixing following switchgear, fixing LED phase indicator and following accessories etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 30 cm above the ground level. The panel should not less than 1250mm x 1250 mm x 450 mm as CPRI approved. Note:- (i) Panel size indicated is nominal. The actual size shall be as per the drawing approved by the Department. Incomer i) MCCB 04 Pole 125 Amp Fixed type 26-30 Ka breaking cap. 01 nos with spreader terminals iii) MFM 4410 LED Meter CL 1.0 WC441010OOOO 9425 - 1 No. (Make :- L&T/ selec) iv) LED Phase Indicating Lamps - 1 Set of 03 Nos. Outgoings i)MCCB 04 Pole 63 Amp Fixed type 16 Ka breaking cap. 04 nos with spreader terminals ii) TPN MCB 40 Amp - 02 Nos

Supplying and fixing Bus-Bar chamber with 32 Amps, 415 volts, 4 way 4 nos. copper bus bars, Complete with connections, earthing the body etc. as required. Anchor Make Item Code 98377 or other equivalent Havells etc