Border Security Force Tender

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. (i) 3 x 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (i) 20 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Supplying and fixing pvc battern/angle holder including connection etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) i) 8 way , Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) ii) 12 way , Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i) Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.ii) Double pole

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Providing and installation of 24/25 Watt LED 6500 K Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack complete with all accessories and tube etc directly on ceiling/wall, including connection with 1.5 sq mm FRLS PVC insulated copper conductor, Single core cable and earthing etc as required (Make Like Havells High wattage PCB Batten code -LHEXAWP7IN1W025 or manufacture having their service centre in Jammu) +- 10% variation depends on the equivalent model.

Supplying and fixing of 300 mm sweep, metalic exhaust fan suitable for single phase, 50 Hz, 230 volts, AC supply in existing opening including connections etc. as required. (Make Crompton - drift air/ Bajaj - Bajaj Bahar 300 mm/ Havell's - Ventil air DS (FHVVEMTDSB12)/ Usha- Aeroclean plus 300mm).

Supply, Installation, Testing and Commissioning of 30 watt security fitting made out of aluminum alloy/ powder painted CRCA body (minimum IP65 protection), high efficency acrylic diffuser, having system efficacy ≥100 lumens/watt; CRI ≥ 70, colour temperature =3000K to 6500K (as required), (including dismantling the old fitting if any) complete with constant current electronic driver including fastner, welding proper fixing in the existing pole/wall/surface, connection testing complete etc. as required.(make crompton/Surya/ Bajaj- GLEAM- F- 33L WHSYPCSDV2/ Halonix- FLDZ- NEO/ Havells- JETA QUANTO FLS 30W LED 765SYMPCGRY.)

Supplying & laying of one number XLPE insulated and PVC sheathed Armoured power cable of 1.1 KV grade of size 2 x 25 sqmm, direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering Conf. to IS:7098 part - I of make Havells / Polycab / finolex / RR Kabel.

Supplying & laying of one number XLPE insulated and PVC sheathed Armoured power cable of 1.1 KV grade of size 2 x 25 sq mm in the existing pipe/open as required. IS:7098 part - I of make make Havells / Polycab / finolex / RR Kabel

Supplying and Laying of 3.5 x 50 Sqmm Aluminum conductor PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required , but excluding sand cushioning and protection covering.make Havells / Polycab / finolex / RR Kabel

Dismantling of existing fitting fixture and accessories, switch board, distribution board, etc of building including making good the damage etc complete as reqd.

Fabrication, supplying, installation, testing and commisisoning of hut type double door compartmantalised, double door feeder pillar of size ( 600mm H X 600mm W X 300mm )outdoor type with back opening totally enclosed weather proof, damp proof, vermin proof having slanting drip proof top with 100 A TPN Aluminium bus bars insulated with heat shrinkable sleeves with M.S angle iron frame of 40X40X5 size of 600mm long legs suitable for 415 volts, 50HZ AC supply complete with painting, connections, interconnections with aluminium conductors complete with brick/ cement concrete foundation i/c finishing etc. and providing and fixing following accessories complete as required. i)100 Amp FP MCCB 35 KA, - 1 Nos (Havells/ L&T DH Series/ Siemens/ABB/C&S/Schneider make ). ii) 32 SP MCB -6 Nos iii) 32 A DP bakelite connectors-6 Nos iv) 40 X 40 X 5 mm angle frame ( 5 meter@ 3 Kg/ meter )

Providing,installation and testing of 415 V,3phase,4 wire ,50 Hz A.C. indoor floor/wall mounted (on a base frame) comparmentalized, totally enclosed, degree of protection IP-42, for indoor application cubical type panel of suitable size withthe following mounting thereon . It shall be fabricated out of 2 mm thick CRCA sheet, frame work may be angle iron/chanel thpe construction ( Where ever necessary) and complete with higned doors having locking arrangement and providing detachable gland plate at the botom of the panel. Complete with inter connections, 200 amps 4 Nos Aluminium bus bar, 2 nos 20x3 copper strip for earth conductors, cable alleys & having provision for future extension, connections ,suitable rating inter connections, earthing, testing and commissioning, ete as required . The panal shall be painted / finished with powder coating in Siemens Grey Shade RAL 7032 and supplied with base channel and suitable pedestal of 50 mm x 50 mm x 6 mm angle iron frame. (minimum size of panel 1500 mm x 1200 mm x 300 mm ).( MAKE only CPRI APPROVED PANEL BUILDER). INCOMMER I) 250 Amp FP MCCB 36 KA, - 1 No. ( Havells- IHLLSEC40250 /L&T DH series /equivalent of Siemens/ABB/C&S/Schneider make) ii) 200 Amp FP On load Change over switch open execution type 1 No. ( Havells- IHCNFO0200 /L&T DH series /equivalent of Siemens/ABB/C&S/Schneider make) OUTGOINGS i) 100 Amp FP MCCB 35 KA, - 2 Nos (Havells/ L&T DH Series/ Siemens/ABB/C&S/Schneider make ) ii) 3 Phase Voltage,Current, Frequency (Make :- L & T/C&S) - 1 set iii) CTs 200/5A, CL-1, 15 VA, Cast Resin for metering - 3 Nos. (Make:- AE ) iv) LED Phase indicator light-03 Nos