Bharat Sanchar Nigam Limited Tender

Supplying and Erection of Swaged type Steel Tubular Pole of total length 9 mtr. & designation "410 SP-33" with bottom section 5 mtr. long (165.1 mm. outer dia. , 5.4 mm. thickness) ,middle section 2 mtr. long (139.7 mm. outer dia. , 4.5 mm. thickness) & top section 2 mtr. long (114.3 mm. outer dia. , 3.65 mm. thickness) , with approximate nominal weight of 154 kg , complete with M. S. Plate of size 300 mm. x 300 mm. x 6 mm. welded at bottom , complete with anti climb device etc. as reqd. Erection of steel tubular pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Replacement / Supplying and erection of 11 KV triple pole heavy duty link set (air break switch) (2 insulator,1Pc. ) complete with installation at site etc. complete as reqd. (Single phase Link set) (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Replacement / Supplying and erection of a set of three no. 11 KV Drop-out fuse units complete with earthing rod as reqd. (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Supplying of 7.77 mm. dia. ACSR conductor (Weasel - 6/1 x 2.59) having tensile strength of 1136 Kgs. and approx. weight of 128 Kg / Km complete as required. (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Supplying & Fixing of angle iron / channel iron / flat iron for brackets / cross arms etc. reqd. for pole top / D.P. structure complete with providing nuts bolts , welding , clamps etc. as reqd. (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Replacement / Supplying & laying of HT / ABC cable of 11 KV grade Aerial Bunched power cable (ABC Cable) of 11 KV grade of size 3 core x 35 Sq. mm. (Aluminum conductor Cross Linked Polyethylene Insulated (XLPE) individual core screened) a/w load bearing (messenger) conductor 25 sq mm , confirming to IEC 60502 part 1 complete with laying as per site requirement (ISI). (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Replacement / Supplying & laying of LT cable of 1.1 KV grade of size 3.5 core x 25 Sq. mm. Aluminum conductor Cross Linked Polyethylene Insulated (XLPE) complete with laying as per site requirement (ISI). (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Replacement / Supplying & laying of LT cable of 1.1 KV grade of size 4 x 6 Sq. mm. unarmoured Copper condutor Cross Linked Polyethylene Insulated (XLPE) complete with laying as per site requirement (ISI). (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Replacement / Supplying & laying of LT cable of 1.1 KV grade of size 2 x 6 Sq. mm. Copper condutor Cross Linked Polyethylene Insulated (XLPE) complete with laying as per site requirement (ISI). (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Replacement / Supplying & Laying of 3 x 1.5 Sq mm PVC insulated, PVC sheathed flexible copper conductor unarmoured cable of 1.1KV Grade on surface/wall i/c making connections, testing etc complete as reqd. (ISI Make) (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Supplying & making outdoor cable end termination for 3 core x 35 Sq.mm. 11 KV grade Aluminium conductor XLPE, insulated individual core screened H.T.cable with heat shrink joint including all accessories including Sockets, lugs, glands, ferrules, etc. complete in all respects as required for cable.

Supplying , Installation,Testing and Commissioning of Maintenance free Chemical earth station as per latest RDSO specifications consisting of :- a) Copper Bonded steel electrode of 3 metre long, 17 mm dia with copper bonded thickness of minimum 250 microns and UL listed and marked - 1no. b) Maintenance free, environmental friendly, mineral compounds, semi soluble , Non corrosive , conductivity improving material of RDSO approved- 35 Kg. c) Polyplastic , heavy duty, weatherproof, environmetle free earth pit chamber with cover size approx. top dia 250mm, bottom dia 330 mm and height 260 mm Heavy duty of 7 Ton load capacity, the base unit should have knockouts for interconnecting of strips

Providing and fixing 20 mm x 3 mm GI Strip on surface or in recess for connections etc. as required.

Replacement / Supplying and erection of 11 KV pin insulator complete with large steel head G.I.pin , nuts , washers etc. as reqd.(Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Replacement / Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings , ball and socket type and complete with galvanised strain clamps , bolts , nuts , washers etc. as reqd.(Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Replacement / Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9KV (rms) with a nominal discharge current rating of 5KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as reqd.(Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Supplying and erection of galvanised stay set for 11 KV Over head line complete with 19/20 mm dia x 1.8 meters long stay rod , anchor plate of size 45cm x 45cm X 7.5 mm thick , thimble, stay clamps, turn buckle ( 20 mm x 600 mm ), 7/4.00 mm dia G.I. stay wire and 11 KV strain insulator etc. in cement concrete 1:3:6 (1cement : 3 coarse sand: 6 graded stone aggregate 40 mm Nominal size) foundation including excavation & refilling etc as required.

Providing and Fixing H.T. Danger Notice Plate of 250 mm x 200 mm made of mild steel , at least 2 mm thick and vitreous enamelled white on both sides, and with inscription in signal red colour on front side as required.(Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Dismantling & re-installation of existing Prodigy meter / HT Trivector Meter / CT PT etc complete with dismantling of from existing Prodigy meter / HT Trivector Meter / CT PT etc from Pole mountings complete and re-installation in new circuit as required with fixing on new mountings, sealing of meters and lisioning with JPDCL /KPDCL/ Electricity Supply Co.etc as per requirement.

Replacement of existing faulty fitting and supplying and fixing new 2 feet (60 cms) 20 Watt LED fittting as light source, suitable for operation on 220 volt single phase ac supply complete connections etc. complete as reqd.( M/s Crompton / Havells of similar superior make) (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Replacement of existing faulty outdoor fitting and Supplying and fixing new 25 Watt LED Street Light Energy saving dust and water proof LED fitting with inbuilt controller suitable for operation on 220 V to 240 Volt etc. on existing duly fixed on the existing GI bracket with nuts & bolts etc reqd.( M/s Havells, Philips, CG, Bajaj, Wipro or SS make). (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Supplying and fixing of ABC Modular Type CE certified capacity 2 Kg Fire Extinguisher filled with ISI marked IS: 14609 ABC Powder complete in all respect.

Pdg and fixing of 4 mm dia copper wire on surface / recess for loop earthing along with surface / recessed cable etc as required.

Supplying, installation, testing and commissioning of LT Panel suitable for operation on 415 V, 3 phase, 50 Hz, 4 wire AC supply system of cubicle design, outdoor, Double door type with hut type top for weather protection etc. fabricated in compartmentalized design from CRCA sheet steel of 16 SWG sheet steel including cleaning, degreasing, scrubbing, finishing etc. and processed complete with powder coating in approved shade, having minimum 100 Amp. capacity TP&N aluminium alloy Bus Bar of high conductivity, 2 nos earth studs, interconnections between switchgears, gland plates cut in two halves and suitable frame made out of 40mm x 40mm x 5mm angle iron of approx 1.0 mtr. height complete with transportation upto site, loading, unloading etc. and grouting of the panel in ground with suitable size CC work / installation in existing CC foundation including digging / cutting the foundation etc. including minor civil work, sign writing etc. complete as per site requirement including providing following switchgear in panel:- i) 32 A 4 Pole MCB ---- 02 Nos as Incomers ii) 63A, 4 pole, panel interior type front operated change over switch - 01 no. iii) Digital type Multi functional meterwith display for Voltage, Current & Freuency complete with CTs etc. (V,I,F) - 01 no. iv) 25 A, 4 Pole, 415 V, C-series MCB ------- 01 No. (Outgoing-1) v) 32 A , DP, 240 v, C- series MCB ------- 02 No. (Outgoing-2) vi) LED type Indicators for RYB -01 set

Supplying, installation, testing and commissioning of M.S. Box suitable for operation on 415 V, 3 phase, 50 Hz, 4 wire AC supply system of outdoor, with sloping roof top for weather protection etc. fabricated from CRCA sheet steel of 16 swg sheet steel including cleaning, degreasing,scrubbing, finishing etc. and seven tank processed complete with powder coating in approved shade suitable for 100 A rating, 25 KA, Four Pole, MCCB in it gland plates including having arragement for fixing on existing steel tubular/ PCC pole with suitable size, sign writing etc. complete as per site requirement.

Supplying and fixing of 8 Way Double door SP&N sheet steel MCB DB, 240 Volt on surface / recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted, earthing etc. as reqd. (Note :- Dismantled unserviceable/faulty/burnt material shall be the property of the agency. Rates should be quoted taking due credit on this account.)

Supplying and fixing of 4 Way Double door SP&N sheet steel MCB DB, 240 Volt on surface / recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted, earthing etc. as reqd.

Supplying and fixing of 25 Amp 4 Pole MCB,415 V 10 KA C curve MCB suitable for inductive load of following poles in the existing MCB DB rating surface / recess complete with connections, testing , commissioning etc. as reqd

Supplying and fixing of 32 Amp Double Pole MCB, 240 V 10 KA C curve MCB suitable for inductive load of following poles in the existing MCB DB rating surface / recess complete with connections, testing , commissioning etc. as reqd

Supplying and fixing of 6 Amp SP MCB, 240 V10 KA C curve MCB suitable for inductive load of following poles in the existing MCB DB rating surface / recess complete with connections, testing , commissioning etc. as reqd

Supplying and fixing of 16 Amp SP MCB, 240 V 10 KA C curve MCB suitable for inductive load of following poles in the existing MCB DB rating surface / recess complete with connections, testing , commissioning etc. as reqd

Providing and fixing 100 Amp, 30 KA Four pole MCCB with thermomgnetic release and terminal spreaders in existing cubical panel board i/c drilling hole in cubical panel, making connections etc as required.

Cat (B) - Buy Back Items Buy-Back (ie minus):- Buy back charges for following life expired / faulty / unserviceable assets complete with dismantling etc. on as-is-where-is basis & clearing the site as per site requirement.

25 KVA 11 KV / 433V, 3 Phase , 50HZ, Dyn11, outdoor ONAN type, aluminium wound transformer, i/c Transformer oil

Swaged type Steel Tubular Pole of length 7-9 mtr

LT Panel comprising of Changeover switches, MCBs etc. and, suitable for operation on 415 V, 3 phase, 50 Hz, 4 wire AC supply system of cubicle design, outdoor, Double door type.