Administrative Reforms Inspections Trainings And Grievances Department Tender

ROTARY PRINTING MACHINE *Two colours offset & one numbering unit with interchangeable cassette system for 30 inch, 27 inch, 26 inch, 23 inch variable size cut-off. *Delivery output of fan folder, horizontal perforation & sheeter unit. TECHNICAL SPECIFICATION :- Substrate : Paper 45-175 GSM Working Width (Max.) : 558.8mm (22”) Reel diameter (Max.) : 1016mm (40”) Circumferential Adjustment of cylinder: 360 degree with motorization . Numbering circumference : 30 inch, 27 inch, 26 inch, 23 inch Numbering cam and holder: 30 inch-4 nos., 27 inch-4 nos. 26, inch-4nos, 23 inch-2 nos. Spiral Folder Speed (Mech.) : 25000 ft/hr Sheeter Unit speed : 10000 to 15000 sheet/hours. Speed depending paper quality gsm.

SHEET FED OFFSET PRINTING MACHINE TECHNICAL SPECIFICATION : Single Colour Sheet Fed Offset Printing Machine. Max. Sheet Format: 52.5x77.5 cm (20”x30”) Streem Feeder with 2-tiltable sucker system suitable for 40-400gsm, Anti-Set off Powder Spray Unit, Anti Static/marking sheet covered Del. Drum Cylinder, Protocol Registration. Inverter duty A/c main motor with frequency control variable speed drive, dual drive pile table.

SHEET FED OFFSET MACHINE 4-Colour Sheet fed Offset Printing Machine Max. Print Format: 18”x25” * Stream Feeder with 2-Titlable Suckers. *Motorized Running Registration System RCR/RLR Controlled from consol/visual table Unit *High Pile Delivery. *IR dryer. *Anti-set off powder spray Unit. *Anti-Marking Jackets. *Anti-Static Del. Drum Cylinder *Protocol Registration. *CE Certified Machine.

PROGRAMMABLE HEAVY DUTY WIRE STITCHING MACHINE & SPINE TAPING MACHINE. Speed : upto 20 seconds/Minute Book Length : Max. 430mm Min. 90mm Book Width : Max. 400mm Min. 360mm (center stitch, open book) Max. 300mm Min. 190mm (side stitch) Book thickness : Max. 30mm Min. 2 sheet (Stab Stitch upto 60mm) Wire : 18x20, 19x20-1/2, 20x24, 20x25 & 21X25 Flat, Power : 3.7 H.P (2.75kw), 415v, 50Hz, AC, Actual power consumption in operation : 1:2 kw. Salient Features *Gathering paper or book-blocks are manually fed into the machine in open form before folding. *The gripper jaw automatically carries the papers/book-block further for stitching. * The length of book, no. of stitches and distance between stitches is to be saved once in 20 programs memory in the touch screen panel on the machine. * The programs stitches the pin at exact location as set. * The stitching head should be compulsory of Delux. Optional Online Attachment I. Book Folding Machine. II. Automatic Spine Taping Machine.

THREAD BOOK SEWING MACHINE Largest size of book : 16”x9” Smallest size of book : 4.5”x4” Number of Stitches : upto 7 Sets. Capacity : 70 seconds/Min. Power Required : ½ HP Motor. Features :- • Equipped with chain feeding saddle. • Electromagnetic Clutch & Brake Automatic • Centralized Lubrication System • Machine Lamp and control panel complete with all accessories.

AUTOMATIC FEEDING CREASING AND PERFORATION MACHINE Maximum Paper Size :- 508mmx760mm Minimum Paper Size : 150mmx200mm Stock range : 120-400gsm Feeding : Automatic Bottom Suction feeding. Counting : Infrared Counting Speed : 7000 sheet/hr. Power : 2kw Three Phase. Dimensions : 1150mm W x 1640mm L x 1100mmH Salient Features • PLC controlled with touch screen. • 6 Nos. Heavy duty hardened and grinded rollers for Multi Perforation & Creasing. • Efficient roller setting device for fast changeover. • Digital counting with infrared counter • Oil free machine. Very less oil consumption with help of genuine heavy bearings. • Sturdy construction of entire machine for long life.

EYELET PUNCHING MACHINE • Semi-Automatic Punching with Eyelet mounting. • Power Driven 3 Phase. • Eyelet auto feeding.

SIX CLAMP FULL AUTOMATIC PERFECT BINDING MACHINE Maximum Book Length & Width : 440mmx230mm, Minimum Book Length & Width : 150mmx100mm, Spine Thickness : 3 to 50mm, Cover Size Cover size max. : 440mmx510mm, Cover size min. : 150mmx220mm, Maximum Speed : 2000 books per hour, Electrical Motors : 9 HP (400-415 V) 3 phase, Heaters : 2.25 KW (200-220V) Single Phase SALIENT FEATURE 1) 6 heavy duty Aluminum alloy clamps with a 6-Axis bearing block for high precision and cover registration 2) Smooth and precise clamp adjustments for setting up book thickness. 3) VFD (variable frequency drive) allows users to fine tune production speeds making it easily operable 4) PLC program logic control (optional) 5) No book no cover-no cover no bind system with laser guided sensors provides for hassle free production by saving time and reducing book/cover wastage. 6) Carbide tip strip cutter with a high speed strip extractor makes for precise and clean cutting. 7) Solid one piece carbide notching cutters with depth and angle adjustments. 8) A3 roller spine Glue unit with built in heaters and head and tail glue cut off for accurate spine gluing. 9) Bevel Gear driven side glue unit with built in heaters for precise side gluing. 10) Pre spine pasting and a cycloidal nipping for precise book to cove registration and pasting 11) Full automatic cover feeder with inline dual stage creasing rollers 12) Online creasing width and depth adjustments for on the fly tuning 13) Double sheet detector and laminated sheet feeder caters for a multi-job use. 14) Pre spine pasting and a cycloidal nipping for precise book to cover registration and pasting. 15) Chute delivery system Optional Features : 1) Hot Melt Adhesive Pre-melt tank (18 ltr capacity) 2) Program Logic Control System (PLC) 3) Optional belt conveyor delivery/stacking system 4) Optional feeder tray for manual feeding of gate-fold covers 5) Double sheet detector 6) Air compressor No Cover-No Bind System

DIE MAKING MACHINE PVC Etching Machine: 25 Ltrs. Plate Size: 50x50cms. UV Exposure Machine Vacumised Plate Size : 50x50 cms. Salient Features • CE Certified Machine. • Heavy Gauge PVC Machine • Peddle Rotation Chain System • Friendly Panel Board. • Top Tank is PVC but inside the Tank the rotation Blades and the Rods used is Stainless Steel. • Top Quality Switch Gears is used. • Plate Clamping and Etching Area is 50x50cms at a time.

AUTOMATIC EDGE SQUARING MACHINE DESCRIPTION :- Book Block size : 810 mm Book spine (min-max) : 5 -70 mm Book Height : 100 mm System Clamp Pressure (adjustable) : 10000 kgs Joint bar pressure: 4000 kgs Power : 3 HP, 3-phase Hydraulic Oil Capacity : 70 litre Weight : 1000 kg PRODUCT SPECIFICATION: • Incorporated with PLC software with HMI screen touch button • Meets the requirement of finishing center stitched magazines, exercise note books, booklets, balance sheets etc. • Emergency switch is there to abort the operation cycle in case of any accident. • Can be operated manually, semi-automatic and automatic • Single man power is required. • Exhaust fan is there to maintain proper temperature in the power pack area thus prevents rubber hoses and hydraulic components. • Castors are provided for maximum mobility of the machine.

630 KVA Servo Controlled Automatic Voltage Stabilizer (Copper) Specification : * Input Voltage Range : 250 to 460 volts (Phase to phase) * Output voltage range : 415 volts +-1% (Phase to phase) * Frequency : 50HZ * Capacity overload : 20% overload for one hour. * Protections : Overvoltage, under-voltage through relays and overload and short-circuit through suitable MCCB *Indoor type *Unbalance type * Suitable for all power factor. * Cooling shall be ONAN. * Efficiency be more than 95% * Adequate size of the stabilizer using heavy duty TATA Steel * Speed of correction more than 10 volt per second. * Suitable capacity of AC synchronous servo motor be used * Suitable quantity of fresh transformer oil of power oil/savita make for adequate cooling * Quality for copper used be 99.97% pure. * Main ON indication lamp. * Visual indication for input voltage beyond the input voltage range. * Voltmeter of 96x96 mm size 0-300v range, A.E make. * Selector switch to check input and output voltage * Auto/manual switch to operate the stabilizer in manual mode with the help of push button, in case of failure in the automatic circuit.