WAPCOS Limited Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
WAPCOS Limited - WAPCO Tender
Civil And Construction
Building Construction
Eprocure
Opening Date19 Jun 2023
Closing Date24 Jul 2023
Tender Amount₹ 3,74,01,550
Costs
EMD
₹ 7,48,100Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_WAPCO_157918_1Bid Award Id
ViewTender No
WAPCOSINFSIVMRFEMKULLUTender Authority
WAPCOS Limited ViewPurchaser Address
-Website
http://http://www.wapcos.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All kinds of soil.
874
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
... More
a) All kinds of soil
903
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
822
-
-
... More
Disposal of earth by mechanical transport including loading, unloading for a lead upto 10 Km.
82
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
54
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
... More
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
13
-
-
... More
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
624
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
... More
All kinds of soil.
113
-
-
... More
CONCRETE WORK
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
108
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
5
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
-
-
-
... More
1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
2
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
123
-
-
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
81
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
21
-
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
81
-
-
... More
R.C.C. WORK
-
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
All works upto Plinth level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
245
-
-
... More
All works above plinth level upto floor V level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
438
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars
29345
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars
52500
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
233
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
736
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
1623
-
-
... More
Weather shade, Chajjas, corbels etc., including edges
68
-
-
... More
Stairs, (excluding landings) except spiral-staircases
25
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
738
-
-
... More
Shelves (Cast in situ)
14
-
-
... More
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
21
-
-
... More
Edges of slabs and breaks in floors and walls
-
-
-
... More
Under 20 cm wide
287
-
-
... More
Extra for shuttering in circular work (20% of respective centering and shuttering items)
25
-
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1338
-
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
73
-
-
... More
BRICK WORK
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
7
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
188
-
-
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
10
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
-
-
-
... More
a) Cement mortar 1:4 (1 cement : 4 coarse sand)
10
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level
-
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
483
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
493
-
-
... More
Providing and filling AAC blocks including proper watering and compaction in sunken areas all complete as per drawings and as directed by the Engineer-in-chargein-Charge.
13
-
-
... More
MARBLE WORK
-
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite of any colour and shade
-
-
-
... More
Area of slab upto 0.50 sqm
21
-
-
... More
Area of slab over 0.50 sqm
12
-
-
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
32
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
14
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
... More
Granite Stone of approved shade
5
-
-
... More
WOOD WORK
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately)
-
-
-
... More
Second class teak wood
2
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
71
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
71
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
250x16 mm
10
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
-
-
-
... More
250x10 mm
37
-
-
... More
100x10 mm
11
-
-
... More
Providing and fixing bright finished brass handles with screws etc. complete:
-
-
-
... More
125mm
90
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
-
-
-
... More
1.5mm thick
141
-
-
... More
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.
32
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
192
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
Fixed to steel windows by welding
8
-
-
... More
Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete.
28
-
-
... More
STEEL WORK
-
-
-
... More
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
-
-
-
... More
10 x 80 mm
304
-
-
... More
10 x 140 mm
64
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
5255
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
... More
Hot finished seamless type tubes
11349
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1443
-
-
... More
FLOORING
-
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
42
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
9
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
... More
Size of Tile 600x600 mm
869
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Size of Tile 600x600 mm
331
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
-
-
-
... More
Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
473
-
-
... More
Providing and fiixng 18 mm thick Polished finish granite stone in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.
51
-
-
... More
Extra for pre finished nosing to treads of steps of marble stone.
73
-
-
... More
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre.
22
-
-
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
... More
Light shade pigment using white cement
5
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Roofing Work
-
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
841
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
... More
Ridges plain (500 - 600mm)
159
-
-
... More
Gutter (600 mm over all girth)
117
-
-
... More
FINISHING
-
-
-
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement : 6 coarse sand)
2151
-
-
... More
6 mm cement plaster of mix:
-
-
-
... More
1:3 (1 cement : 3 fine sand)
733
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
1140
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
2883
-
-
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour
-
-
-
... More
Two coats
2883
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
-
-
-
... More
New work (two or more coats) over and including water thinnable priming coat with cement primer
5
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
1060
-
-
... More
Finishing walls with textured exterior paint of required shade :
-
-
-
... More
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
1140
-
-
... More
Neat cement punning.
5
-
-
... More
ROAD WORK
-
-
-
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
83
-
-
... More
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :
-
-
-
... More
On W.B.M. @ 0.75 Kg / sqm
275
-
-
... More
On bituminous surface @ 0.50 Kg / sqm
275
-
-
... More
Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge
-
-
-
... More
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
14
-
-
... More
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.
-
-
-
... More
40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
9
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
-
-
-
... More
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
69
-
-
... More
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete.
-
-
-
... More
New work (Two or more coats)
21
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
38
-
-
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
5
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
42
-
-
... More
ALUMINIUM WORKS
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
69
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the costof EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
1287
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
100
-
-
... More
With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)
34
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
... More
Upto 5mm depth and 5 mm width
318
-
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.
-
-
-
... More
Powder coated minimum thickness 50 micron aluminium tubular handle bar
16
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
12
-
-
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
-
-
-
... More
Powder coated minimum thickness 50 micron aluminium
190
-
-
... More
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-incharg
-
-
-
... More
Powder coated minimum thickness 50 micron aluminium
190
-
-
... More
WATER PROOFING
-
-
-
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
-
-
-
... More
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
-
-
-
... More
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
-
-
-
... More
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
-
-
-
... More
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
54
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
... More
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge.
-
-
-
... More
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
-
-
-
... More
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
43
-
-
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :
-
-
-
... More
(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.
-
-
-
... More
(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.
-
-
-
... More
(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
-
-
-
... More
Using rough kota stone.
52
-
-
... More
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :
-
-
-
... More
Using rough kota stone.
79
-
-
... More
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage.
64
-
-
... More
PLUMBING
-
-
-
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
11
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
... More
(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
12
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen Sink with Drain Board
-
-
-
... More
510 x1040 mm bowl depth 250 mm
4
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Flexible pipe
-
-
-
... More
32mm dia
16
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
12
-
-
... More
Providing and fixing toilet paper holder
-
-
-
... More
C.P. brass
11
-
-
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
-
-
-
... More
Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
16
-
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
12
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality to conforming to IS 8931.
-
-
-
... More
15 mm nominal bore
11
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
... More
15 mm nominal bore
4
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931.
-
-
-
... More
15 mm nominal bore
5
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS : 8931
-
-
-
... More
15 mm nominal bore
32
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
12
-
-
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
-
-
-
... More
100 mm dia
15
-
-
... More
Cutting holes upto 30 X 30 cm in walls including making good the same.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks
11
-
-
... More
Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
15
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Internal work - Exposed on wall
-
-
-
... More
20mm nominal outer dia pipes
40
-
-
... More
25mm nominal outer dia pipes
72
-
-
... More
32mm nominal outer dia pipes
24
-
-
... More
40mm nominal outer dia pipes
12
-
-
... More
50mm nominal outer dia pipes
24
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work including cutting chases and making good the walls etc.,
-
-
-
... More
15mm nominal outer dia pipes
50
-
-
... More
20mm nominal outer dia pipes
40
-
-
... More
25mm nominal outer dia pipes
30
-
-
... More
32mm nominal outer dia pipes
10
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This incudes jointing of pipes and fittings with one step CPVC solvent, trenching, refilling, and testing of joints complete as per the direction of the engineer incharge
-
-
-
... More
External work
-
-
-
... More
50mm nominal outer dia pipes
100
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end).
-
-
-
... More
25 mm nominal bore
4
-
-
... More
32 mm nominal bore
8
-
-
... More
40 mm nominal bore
2
-
-
... More
50 mm nominal bore
2
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
25 mm nominal bore
2
-
-
... More
Providing and fixing unplasticised PVC connection pipe with brass unions.
-
-
-
... More
30 cm length
-
-
-
... More
15 mm nominal bore
20
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
20000
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
400
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 X 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
... More
100 X 100 mm size P type
-
-
-
... More
With Sewer bricks conforming to IS : 4885
7
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90 X 80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 X 610 mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg):
-
-
-
... More
With Sewer bricks conforming to IS : 4885
12
-
-
... More
Inside size 120 X 90 cm and 90 cm deep including C.I. cover with frame (medium duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg)
-
-
-
... More
With Sewer bricks conforming to IS : 4885
1
-
-
... More
Extra for depth of manholes
-
-
-
... More
Size 90x80cm
-
-
-
... More
With Sewer bricks conforming to IS : 4885
10
-
-
... More
Size 120x90cm
-
-
-
... More
With Sewer bricks conforming to IS : 4885
1
-
-
... More
Constructing brick masonry road gully chamber 50 X 45 X 60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 X 450 mm precast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
-
-
... More
Making soak pit 2.5 m diameter 3.0 m deep with 45 X 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Supply, Installation, testing and commisioning of Domestic Water Pumps(to lift water from underground domestic water tank to terrace tank of building)Location - Near underground water tank with Level Controller with sufficient nos. of low / high level alarms, contacts with electrodes and control wiring for the automatic operation of all water supply pumps to achieve the functional requirement shall be provided. Control wiring between these pumps and water tanks shall be provided. Raw water pumps must start at low level of water in underground domestic water tank & stop at high water level in that tank. Dry running protection shall be provided for all the pumps.All water supply to operate automaticaly through level controller.
-
-
-
... More
Capacity 1 LPS each minimum
-
-
-
... More
Head 20 Mts.
-
-
-
... More
RPM 2800 / 2 HP
-
-
-
... More
No. of pumps 1
2
-
-
... More
Providing and Fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
90
-
-
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.
-
-
-
... More
0.80 mm thick with zinc coating not less than 275 gm/m²
120
-
-
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
110mm
30
-
-
... More
Bend 87.5
-
-
-
... More
110mm bend
12
-
-
... More
Shoe (Plain)
-
-
-
... More
110mm shoe
6
-
-
... More
Providing and fixing unplasticised PVC pipe clips of approved design to unplasticized PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete
-
-
-
... More
110mm
60
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams
6
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
150 mm diameter
200
-
-
... More
200 mm diameter
200
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
-
-
-
... More
150 mm diameter S.W. pipe
80
-
-
... More
200 mm diameter S.W. pipe
80
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design
-
-
-
... More
150 mm diameter S.W. pipe
120
-
-
... More
200 mm diameter S.W. pipe
120
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
150 mm dia. R.C.C. pipe
5
-
-
... More
250 mm dia. R.C.C. pipe
5
-
-
... More
300 mm dia. R.C.C. pipe
5
-
-
... More
Supply, Installation, Testing and Commisioning of Evacuated Tube Collector type Solar Water heater of 100 litres with electrical back up with enamel coated tank complete in all respect as per the directions of engineer in charge
10
-
-
... More
Supply Installation, Testing and Commisioing of Handicap Toilet special fixtures to the complete satisfaction of the engineer in charge
-
-
-
... More
(a) SITC of Grab Bar vertical swing white(Ref. Jaquar Cat. No. WAC-WHT-BG0800 OR approved equivalent)
3
-
-
... More
(b) SITC of Grab Bar Left/Right 90 angle, White (Ref Jaquar WAC-WHT-BAD090
3
-
-
... More
(c ) SITC of Grab Bar 842mm long white, White (Ref Jaquar WAC-WHT-BRO750)
3
-
-
... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.
-
-
-
... More
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.
-
-
-
... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)
213
-
-
... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
54
-
-
... More
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.
-
-
-
... More
32 mm dia.
10
-
-
... More
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.
-
-
-
... More
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser
32
-
-
... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
32
-
-
... More
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.
32
-
-
... More
Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH 8mm DIA 1.2 METER LONG FLEXIBLE TUBEAND WALL HOOK ALD-CHR-573 or equivalent
11
-
-
... More
Providing & fixing chrome plated brass battery based infrared sensoroperated pillar cock, having foam flow technology.
-
-
-
... More
15 mm nominal bore
4
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
... More
150mm diameter
9
-
-
... More
Providing and fixing CP Brass Single lever telephonic wall mixer ofquality & make as approved by Engineer in charge.:
-
-
-
... More
(a) 15mm nominal dia
9
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
... More
600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms
9
-
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
9
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
POINT WIRING
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
Group C
147
-
-
... More
Wiring for group controlled (looped) light point/ fan point/call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
Group C
205
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2280
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
20
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps switch
86
-
-
... More
15/16 amp switch
68
-
-
... More
3 pin 5/6 amp socket outlet
86
-
-
... More
6 pin 15/16 amp socket outlet
68
-
-
... More
Bell Push
10
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
50
-
-
... More
Supplying and fixing following size/module, GI box along with Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
... More
1 or 2 Module
10
-
-
... More
3 Module
154
-
-
... More
4 Module
10
-
-
... More
6 Module
20
-
-
... More
8 Module
20
-
-
... More
12 Module
10
-
-
... More
SUBMAIN & CONTROL WIRING
-
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
50
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
750
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
10
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
10
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
120
-
-
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
90
-
-
... More
CABLES
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
200
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
100
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
100
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
150
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3½ X 400 sq. mm (82mm)
4
-
-
... More
3½ X 300 sq. mm (70mm)
8
-
-
... More
3½ X 35 sq. mm (32mm)
10
-
-
... More
4 X 16 sq. mm (28mm)
4
-
-
... More
3½ X 120 sq. mm (45mm)
4
-
-
... More
3½ X 185 sq. mm (57mm)
4
-
-
... More
4 X 25 sq. mm (28mm)
4
-
-
... More
4 X 10 sq. mm (25mm)
4
-
-
... More
3½ X 50 sq. mm (35mm)
4
-
-
... More
LT CABLES
-
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables :
-
-
-
... More
Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.
-
-
-
... More
3.5c x 400 sqm XLPE cable
50
-
-
... More
3.5c x 300 sqm XLPE cable
100
-
-
... More
3.5 C x 185 Sqmm XLPE cable
75
-
-
... More
3.5 C x 120 Sqmm XLPE cable
75
-
-
... More
3.5 C x 50 Sqmm XLPE cable
75
-
-
... More
3.5 C x 35 Sqmm XLPE cable
75
-
-
... More
4 C x 25 Sqmm XLPE cable
75
-
-
... More
4 C x 16 Sqmm XLPE cable
120
-
-
... More
4c x 10 sqm XLPE cable
200
-
-
... More
DB
-
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
30
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
198
-
-
... More
Supplying and fixing following rating, four pole, 415 volts, isolator/MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps
1
-
-
... More
63 amps
4
-
-
... More
100 amps
2
-
-
... More
Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way (4 + 24), Double door
1
-
-
... More
12 way (4 + 36), Double door
6
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25 amps
3
-
-
... More
40 amps
12
-
-
... More
63 amps
6
-
-
... More
PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS
-
-
-
... More
Telephone socket outlet
19
-
-
... More
TV socket outlet
2
-
-
... More
Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as required.
-
-
-
... More
2 Pair
380
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng surface/recessed steel/ PVC conduit as required
40
-
-
... More
Supplying and fixing of following sizes medium class PVC conduit aong with accessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required
-
-
-
... More
25mm
420
-
-
... More
Supplying and Installation of following size perforated of painting with powder coating M.S. cable trays of perforation of not more than 17.5% in convinient sections, joined with connectors suspended from the cieleing with MS suspenders including bolts and nuts painting suspenders etc as required
-
-
-
... More
450 mm width x 50 mm depth x 2 mm thickness
50
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
60
-
-
... More
LIGHT FIXTURES
-
-
-
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
342
-
-
... More
Installation, testing and commissioning of ceiling fan including wiring the down rods of standard lenght (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable including providing and fixing phenolic sheet cover on the fan box as required etc
60
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm sweep
10
-
-
... More
Extra for fixing the louvers/ shutters complete with frame for exhaust fan of all sizes.
10
-
-
... More
Supply of ISI marked energy efficient exhaust fan plastic ideal for mounting on glass window with 200mm sweep (Havells Cat No. Ventilair DX 200mm sweep or equivalent)
10
-
-
... More
Supply of 18 W LED Tubelight with batten -Basic all purpose surface and wall mounted LED batten with Aluminum housing & integrated electronic driver with all accessories as required complete in all respect. (Havells Cat no. - LUMILINEPLUSBS18WLED865SPCS or Equivalent)
137
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
60
-
-
... More
SITC LED surface mounted circular downlight with LED Light Emitting Diode 15W, with white powder coated aluminium housing with integrated electronic driver complete in all respect
133
-
-
... More
SITC LED recessed circular downlight with LED Light Emitting Diode 15W, with white powder coated aluminium housing with integrated electronic driver complete in all respect
10
-
-
... More
Supply of 9 W LED Tubelight with batten 600 mm -Basic all purpose surface and wall mounted LED batten with Aluminum housing & integrated electronic driver with all accessories as required complete in all respect.
2
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
50
-
-
... More
MAIN LT PANEL
-
-
-
... More
Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA sheet, dust and vermin proof, outdoor type, double door, with canopy, TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus bar and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, powder coated painting and marking as specified. Switch boards complete as per schematic diagram:
-
-
-
... More
Type of construction: Form 3
-
-
-
... More
IP classification: 42
-
-
-
... More
All MCCBs in Main LT Panel shall have minimum 50 kA breaking capacity
-
-
-
... More
The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed in the Specifications
-
-
-
... More
Colour: Gray Powder Coated, as per approved sample.
-
-
-
... More
Incomings:
-
-
-
... More
1 nos, 320 Amps. 4 pole MCCB of fault breaking capacity 50 KA (ICS=ICU up to 433 V) and 1 nos. 160 Amps 4 pole MCCB, electrically operated, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, confirming to IS: 13947-2 1993 as amended up-to-date complete following accessories
-
-
-
... More
a) Independent manual spring closing mechanism-1 No.
-
-
-
... More
b) Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection-1set.
-
-
-
... More
c) Digital type Voltmeter, with selector switch & back up HRC fuses/MCB’s-1 set.
-
-
-
... More
d) Digital type Ammeter, with selector switch and one set of 3 nos. CT’s of ratio 1600/5A Class I accuracy and 15 VA burden-1 set. (Ratio to be filled up).
-
-
-
... More
e) 3 Nos. Phase indication LED lamps for each incoming with 2 Amp back up HRC fuse, breaker ‘ON’ indicating light with 2 A HRC fuse, test terminal block set, fuses, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required.
-
-
-
... More
f) Shunt trip coil 220 V AC.
-
-
-
... More
Bus Coupler:
-
-
-
... More
1 No.-160 Amps horizontal four pole drawout type, MCCB of fault breaking capacity 50 KA (ICS=ICU up to 433V) electrically operated, with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS-13947-2-1993 as amended up to date complete with following accessories for each ACB
-
-
-
... More
a) Independent manual spring closing mechanism-1 No.
-
-
-
... More
b) Breaker ‘ON’ indicating light with back up 2 A HRC fuse test terminal block, fuses, circuits as per standard practice, auxiliary contact contractors for positive electrical interlocking of breakers, etc as required-1 set.
-
-
-
... More
Bus Bars:
-
-
-
... More
TPN aluminum bus bars of minimum of 400 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.
-
-
-
... More
Interlocking:
-
-
-
... More
Electrical through advance contacts in ACB's/MCCB’s (Incomers & Bus Couplers) and mechanical (Castel Key) interlocking should be provided to ensure that only one supply is available at one time on each section of bus and to eliminate any possible of accidentally approaching two supplies at one bus section.
-
-
-
... More
Outgoings:
-
-
-
... More
(b) 100 Amps TPN MCCB (ICS=50 kA) - 2 Nos.
-
-
-
... More
(c) 63 Amps, TPN, MCB -6 Nos.
-
-
-
... More
(d) 40 Amps, TPN, MCB -4 Nos.
-
-
-
... More
CAPACITOR PANEL (40 KVAR): -
-
-
-
... More
Supply, install, test and commissioning of floor mounted capacitor panel 40 KVAR Capacity in 4 step automatic Power factor correction relay with setting for "Set Power Factor Bandwith ",and with integaral PF meter.
1
-
-
... More
External lighting panel
-
-
-
... More
Supplying, installation, testing and commissioning of cubical type outdoor panel with canopy suitable outdoor use for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates I/C cleaning and finishing complete with 7 tank process for powder coating in approved shade, bus bar supports, with short circuit withstand capacity of 25 MVA for 1 Sec., bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sq.mm. PVC insulated copper conductor S/C cable alleys, cable gland plates in two half, I/C providing following switchgears:
-
-
-
... More
Incomer:1nos 63A TPN MCCB
-
-
-
... More
1 no 96mm x 96mm digital Voltmeter and Ammeter with LCD display for voltage & current with suitably rated CTs and MCB protection.
-
-
-
... More
1 set of three phase indicating lamps with suitable protection.
-
-
-
... More
Busbar: Equally sized three phase and neutral copper bus bars suitably sized to carry 100A current with colour coded heat shrinkable sleeves.
-
-
-
... More
Outgoing:
-
-
-
... More
5nos 32A TPN MCBs
-
-
-
... More
Panel complete as above
1
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
14
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
50
-
-
... More
Panel complete as above with capacitor panel
500
-
-
... More
Providing and fixing of lightening conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick copper base plate including holes etc. complete as required.
2
-
-
... More
Fixing of lightening conductor finial (single prong), with base plate including holes etc. complete as required.
2
-
-
... More
Jointing copper/ G.I. tape (with another copper/ G I tape, base of the finial or any other mettallic object) by rivetting/ nut bolting/ sweating and soldering etc. as required
2
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
20
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
20
-
-
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
4
-
-
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
20
-
-
... More
SUBSTATION
-
-
-
... More
Supply, installation, testing and commissioning of 150KVA, 11kV/0.433 kV,, 3 Phase, 4 wire, 50 Hz., ON-AN Transformer, Dyn11 Vector group, copper bound with outdoor duty type, OFF load tap changer on HV Side range -7.5% ,0, +5% in the steps of 2.5% per step, type transformer with RTCC+AVR inclusive of all control cable. Cable box connection including cable adapter box at primary and secondary end (LT side) shall be connected through busduct/ cable, complete with all accessories including first filling of oil, double float buchholz relay protection, high winding temperature, oil temperture sensors and gauges etc. confirming to IS 1180 ammended upto date, interconnection of control cables and accessories etc complete.Note-Transformer will have metering CT & PT of class 0.5 including interconnection of control cables as per detailed technical specifications and as required. Transformer losses must be as per 1180.
1
-
-
... More
2-POLE STRUCTURE:
-
-
-
... More
1.0 Supply, erection and commissioning of 2-pole structure for terminating 11 KV O.H. supply from supply company as per specifications and drawing. The 2-pole structure shall comprise of:-
-
-
-
... More
a) MS tubular swaged pole 11 mtrs high (410SP 24) (as per latest relevant BS standard)or as per Indian std., in cement concrete foundation 1:3:6 (1 cement : 3 coarse sand : 6 graded aggregate 40mm nominal size) including excavation and refilling etc. as required. The rate shall be inclusive of painting with 2 coats of aluminium paint (on red oxide). The portion of pole under the ground shall be provided with 2 coats of bituminous paint -2 Nos.
-
-
-
... More
b) Steel sections, channels angles, flats, clamps, GI nuts, bolts and required hardware etc of different sizes for cross arms, bracings, supports etc. for pole GODO etc. including anticlimbing barbed wires (conforming to BS Standard) having 4 points barbs spaced 75 ±12mm apart. All steel structure shall be given 2 coats of red oxide primer and 2 finishing coats of aluminium paint as required as per drawings and direction of Engineer-in-charge -Lot
-
-
-
... More
c) Supply, installation, testing and commissioning of 11 KV class disc/pin/support insulators complete with clamps and fixing hard disc/pin/support insulators complete with clamps and fixing hard wares etc. complete as required as per drawings and direction of Engineer-in-charge -Lot
-
-
-
... More
d) Supply, installation, testing and commissioning of 11 KV station class thyrite type lightning arrestors complete with mounting arrangement (on all phases) -1 Set
-
-
-
... More
e) Supply, installation, testing and commissioning of drop out -lock out (DOLO) fuse, gang operating device (Air Break Switch) with pad locking arrangement (operating rod to be supported properly), complete with operating handle and locking arrangement -1 Set
-
-
-
... More
f) Supply, installation, testing and commissioning of GI stay set complete with 20mm dia 1.8 M long stay rod with 450 x 450 x 7.5 mm anchor plate with thimbles, stay clamps, 7/4.00 mm dia GI stay wire, turn buckle (20mm x 600mm) strain insulator bow tightner in cement concrete 1:3:6 foundation as excavation and refilling -1 Sets
-
-
-
... More
2-pole structure as described above.
1
-
-
... More
METER PANEL
1
-
-
... More
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of cubicle type 11 kV metering panel fabricated out of 14 SWG CRCA sheet steel, free standing floor readable dust and vermin proof with arrangement for sealing the covers and doors, re-inforcement of suitable size angle iron, channels, T sections of flats wherever necessary. Cable gland plate shall be provided on bottom of metering panel. Panel shall be treated with allanti-corrosion process prior to powder coating.
-
-
-
... More
Approval shall be obtained from concerened Electricity Board for the shop drawings before fabrication.
-
-
-
... More
The metering panel shall comprise the following
-
-
-
... More
Trivector Meter of Secure make, accuracy class 0.5
-
-
-
... More
3 nos cast resin CT's of 5/1 amps CT ratio, 15VA burden and accuracy class 0.5
-
-
-
... More
1 no. 3 phase potential transformer of approved make by Electricity Board
-
-
-
... More
Ratio 11000V/√3/110/√3
-
-
-
... More
VA Burden 100VA
-
-
-
... More
Class 0.5
-
-
-
... More
The metering panel shall be complete with all interconnections etc. as above including calibration of instruments as per Electricity Board.
-
-
-
... More
Supply, laying & Testing of following 11 KV( UE) grade multicore Aluminium conductor XLPE insulated cable, insulation screening with extruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required. Laying in ground including excavation, sand cushioning, brick protective covering and refilling the trench etc as required all inclusive.
-
-
-
... More
3 C x 70 Sq. mm 11 KV (UE)
100
-
-
... More
H.T outdoor cable Termination
-
-
-
... More
Supplying and making outdoor cable end terminations with heat shrinkable cable jointing kit complete with all accessories including lugs suitable for following size of 3 core XLPE aluminium conductor cable of 11KV grade as required
-
-
-
... More
70 sq mm
4
-
-
... More
RUBBER HAND GLOVES :Supplying Rubber hand gloves suitable for 11/6.6 KV operation with ISI mark.
2
-
-
... More
INSULATING MATS: Supply & installation of 2000 mm X 1000 mm and of thickness as mentioned below, approved quality insulating Elastomer mats as per specifications.
-
-
-
... More
Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2 mm (Class A)
10
-
-
... More
Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2.5 mm (Class B)
6
-
-
... More
First aid box
4
-
-
... More
Providing of First Aid Box as approved by St. John Ambulance Brigade/Indian Red Cross conforming to IS 2217-1963.
-
-
-
... More
Shock TREATMENT CHART
2
-
-
... More
SHOCK TREATMENT CHART :Supply and installation of shock treatment chart framed in good quality glass in English / Hindi / Local Language).
-
-
-
... More
Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on front side as required
10
-
-
... More
Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on front side as required
4
-
-
... More
11kV HT VCB PANEL BOARD: Supply, Installation, Testing and Commisioning of High Voltage Switchgear suitable for indoor installation 11 KV 3 phase 50 Hz AC Supply, 350 MVA breaking capacity, metal clad, draw out type, vacuum circuit breaker, motor charged, equipped with short circuit, over current, earth fault protection, master relay and auxiliary relay for transformer protection, PT, CT Operated Ammeter, Voltmeter indicating lamp etc as per IS: 13118 amended up to date.
1
-
-
... More
Supply, Installation, Testing, Commisioning (SITC) of 82.5 KVA of D.G. Set, 3PH, 50Hz, Prime rating, CPCB-II compliant, standard DG set with standard AMF panel complete with Silencer, standard controller with Auto start/stop System, Exhaust Bellows, Battery with Leads, Sub‐base Fuel Tank & First fill of Lube oil and Coolant. complete with engine, alternator, base frame, radiator/heat exchanger, fuel tank, control panel, fuel piping foundation, all electrical interconnection, loop earthing, silencer pipe/ exhaust chimney as per latest CPCB norms, standard accessories and accoustic enclosure complete in all respect as per the directions of engineer in charge
1
-
-
... More
Supply, Installation, Testing and Commissioning of Hot dip Galvanized octagonal pole with integral cotrol box, MCB and cable termination arrangement with top bracket of overall length 6 metre (sheet thickness 3mm), top dia.(A/F) 70mm and bottom dia. (A/F) 130mm, foundation size below ground level 550mm x 550mm x 1500mm, 4Nos. foundation bolts size 20mm dia., length 600mm with base plate dimensions 220mm x 220mm x 12mm thick with single arm, 1 metre each bracket fixed on the top of the pole
15
-
-
... More
Supply, installation, testing and commissioning of high performance 30W LED street light, with connectors all duly wired , connection & wiring from junction box with 3# 2.5 sqmm copper wires, Mounted on 6 mtr. Pole
15
-
-
... More
FIRE ALARM SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.6 zone panel for fire alarm system100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set.Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set.Amplifier change over switch for inter changing amplifier- 1 No.Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No.Gooseneck microphone with stand and ON/OFF switch -1 No.Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set.Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set.
1
-
-
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
7
-
-
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
7
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required
280
-
-
... More
Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery backup complete as required.
6
-
-
... More
VIDEO SURVEILLANCE SYSTEM (IP CCTV)
-
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required- 1 run of cable
280
-
-
... More
Supply, Installation, Testing and Commissioning of CAT6 information outlet (I/O) for camera at user end.Approved Makes: Belden/ Siemon/ Panduit/ Der Wiser
14
-
-
... More
Supply, Installation, Testing and Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end.Approved Makes: Belden/Siemon/Panduit/Der Wiser
1
-
-
... More
Supply , Installation , Testing and Commissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity. Approved Makes: Belden/Siemon/Panduit/Der Wiser
14
-
-
... More
Supply , Installation , Testing and Commissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity.Approved Makes: Belden/Siemon/Panduit/Der Wiser
14
-
-
... More
Supply , Installation , Testing and Commissioning of 1, 2 and 4 port face plate white for I/O fixing at user side. Approved Makes: Belden/Siemon/Panduit/Der Wiser
14
-
-
... More
Supply , Installation , Testing and Commissioning of 3 MP Dome Camera , ONVIF profile S & G ,UL , CE , FCC Certified , 1/2.8" CMOS sensor ,3.6 mm fixed focal , triple stream ,Min Illumination :0.01 Lux @ (F1.2, AGC ON), 0.028 Lux @(F2.0, AGC ON), 0 Lux with IR , Shutter Speed : 1/5 ̴ 1/100,000 s , Edge analytics : line crossing , perimeter intrusion , stationary object ,Video Compression : H.265 ,H.264 , frame rate 30 fps @ 3MP , Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object ,Inbuilt IR LED , IR distance upto 30 mtrs ,IP 66 , POE .Approved Makes :Allgovision/ Impulse / Norden / Pelco/ Axis
10
-
-
... More
Supply , Installation , Testing and Commissioning of 3 MP Bullet Camera , ONVIF profile S & G ,UL , CE , FCC Certified , 1/2.8" CMOS sensor ,3.6 mm fixed focal , triple stream ,Min Illumination :0.05 Lux @ (F1.2, AGC ON), 0 Lux with IR , Shutter Speed : 1/5 ̴ 1/100,000 s , Video Compression : H.265 , H.264 , 120 dB WDR ,frame rate 30 fps @ 3MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object , Inbuilt IR LED , IR distance upto 30 mtrs ,IP 66 , POE .Approved Makes :Allgovision/ Impulse / Norden / Pelco/ Axis
2
-
-
... More
Supply, Installation, Testing & Commissioning of ONVIF profile S & G ,UL certified 16 Channel NVR , 4 SATA ports , each SATA capacity of upto 8 TB , Recording Bandwidth 320 Mbps , 1 X HDMI , 1 X VGA , Alarm : 16ch in / 1ch out , 1 X RJ45 port , 1x3.0 USB for backup / upgrade, 2x 2.0 USB for mouse , Smart Phone support : iOS, Android. Approved Makes :Allgovision/ Impulse / Norden / Pelco/ Axis
1
-
-
... More
Supply , Installation , Testing and Commissioning of 6TB Surviellance Hard Disk. Approved Makes: WD /segate /Toshiba/HP
2
-
-
... More
Supply, Installation, Testing & Commissioning of 3MP IR IP H.265 High Speed PTZ dome camera with 30X Optical zoom, Accurate & fast focusing, WDR, Micro SD card slot, Smart analytics and 200M IR support,Intrusion detection, Cross line detection,Auto Tracking,Compatibility ONVIF (Profile S,G), API.
2
-
-
... More
Supply, Installation, Testing & Commissioning of 40' Flat Screen HD led (24X7) with Interfaces include HDMI, DVI, D-sub, Component and Composite input as well as RS-232C and RJ45 for extensive connectivity, remote control and wall mount unit / floor stand complete with making connections etc complete as reqd. Approved Make:- LG / Samsung / Panasonic
1
-
-
... More
Client workstation Processor intel Zeon 4ghz or higher, OS geniune Window 10/7, Color Monitor 22", RAM 8GB DDR3 SDRAM, MEMORY 1TB HDD, 2GB GRAPHIC CARD complete as required
1
-
-
... More
FIRE FIGHTING WORKS
-
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
100 mm dia
15
-
-
... More
150 mm dia
2
-
-
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered
-
-
-
... More
450 lpm at 35 m Head
1
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
100 mm dia
3
-
-
... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :
-
-
-
... More
100 mm dia
3
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
... More
150mm
1
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
-
-
-
... More
Single headed Gunmetal
3
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
... More
30 m
3
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
-
-
-
... More
Gun Metal
6
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
-
-
-
... More
Gun Metal
3
-
-
... More
Providing and fixing standard firemans axe with heavy rubber handle.
3
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
-
-
-
... More
4 way - 150 mm dia M.S. Pipe
1
-
-
... More
Providing and fixing 4 mm thick glass door of size 2.1 m x 0.9 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour.
3
-
-
... More
Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer's specifications.
-
-
-
... More
a) CO2 gas nozzle type - 9 Litre capacity (IS:15683).
6
-
-
... More
b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683).
6
-
-
... More
c) ABC dry powder stored pressure type 6 kg capacity (IS:15683).
6
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
-
-
... More
Providing and fixing signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+ -10%) containing lumigen II as base chemical, covered under UV stablized coating and of appropriate size (Glo-lite or eq. Make) including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats anchor fasteners etc. complete in all respacts as diercted by Engineer-in-charge
6912
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements