The Himachal Pradesh State Industrial Development Corporation Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
The Himachal Pradesh State Industrial Development Corporation Limited - HPSIDC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Jun 2024
Closing Date24 Jun 2024
Tender Amount₹ 77,22,051
Costs
EMD
₹ 1,54,500Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
Construction Of Veterinary Hospital At Chowki Chandrahan Distt. Mandi (hp).
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SIDC_88918_1Bid Award Id
ViewTender No
Job No. 20Tender Authority
The Himachal Pradesh State Industrial Development Corporation Limited ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
b) Columns, pillars, posts and struts. Square, rectangular or polygonal in plan for all floor level in all heights.
240.48
-
-
(c) Beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintels up to any depth(not exceeding 1mtrs in depth) for all floor level in all heights.
182.39
-
-
(d) Suspended floors, roofs, landings, balconies and access platform.
170.67
-
-
(e) Stair cases with slopping or stopped soffits exclding landing
31.38
-
-
(f) Vertical surface such as wall any thickness partition plaster and string course and like
90.37
-
-
Providing and laying cement concrete 1:3:6 (1cement:3sand:16graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
26.93
-
-
Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (One cement : one point five sand : three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) excluding cost of centering, shuttering, finishing and reinforcement all work up to plinth level including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.(a) Foundation footing bases of columns etc. and mass concrete.
30.33
-
-
Providing and laying reinforced cement concrete 1:1.5:3 (One cement : one point five sand : three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.(a) Foundation footing bases of columns etc. and mass concrete.
11.9
-
-
Reinforced cement concrete 1:1.5:3 (One cement : one point five sand : three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) in beams, suspended floors, roofs having slop up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge
63.68
-
-
Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size.
5.43
-
-
Providing Tor steel reinforcement including cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position including cost of binding wire complete in Super-structure for all floor level in all heights, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (Thermo-mechanically treated bars of grade Fe-500D or more).
16786.76
-
-
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve crushed stone aggregate 20mm (Twenty millimeter) nominal size) at plinth level in Cement Mortar 1:6 (One cement: six sand) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
62.33
-
-
Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer-in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) including payment of MC/ local body dumping charges it lived any as per satisfaction of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.
78.73
-
-
Stone filling / Soling under floor dry hand packed with hard stone( 22.5 cm thick) of approved quality consolidated properly with hand or mechanical rammer to required level and preparing surface complete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
9.84
-
-
Brick work using common burnt clay building bricks FPS (non modular) of class designation 7.5 in super structure for all floors in all heights in cement mortar 1:6 (One cement isto six sand) and curing complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.
43.54
-
-
Half Brick masonry in common burnt clay building bricks FPS (non modular) in Cement Mortar 1:4 (One cement: four sand) in brick of class designation 7.5 in Super-structure above plinth level for all floors in all heights including curing complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
246.06
-
-
Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position with hole fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Sal wood in all floors level, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
2.78
-
-
Providing and fixing pannelled glazed and pannelled and glazed door shutter for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge (Butt hinges and necessary screws shall be paid separetly 2nd class teak wood 35mm thick shutters).
66.33
-
-
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of average width of apertune 1.4 mm in both directions wth wire of dia 0.63mm, for doors, windows and clerestory windows with hinges with necessary screws 35 mm (Thirty five millimetre) thick shutter second class teak wood including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.
51.79
-
-
Providing & fixing aluminium sliding door bolt ISI marked anodized (anodic coating not less than grade AC-10 as per ID :1868), transparent or dyed to required colour and shade with bolts and nuts screws etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a) 300mm x 16mm.
17
-
-
Providing and fixing aluminium tower bolts (ISI Marked ) anodized anodic coating not less than AC-10 as per IS :1868 transparent or dyed to required shade & colour., including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a)300 x 10mm
274
-
-
Prooviding and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC-10 as per IS 1868 with nuts and secrews etc complete., including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a) 125mm.
134
-
-
Providing and fixing oxidized brass hooks and eyes 250mm ( Two hundred fifty millimeter)hundred , including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
60
-
-
P/F aluminium hanging floor door stopper, ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868 with nuts screws etc to suit shutter thickness complete , including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
22
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer(having brand logo with ISI, IS :3564, embossed on the body, door weight upto 35kg and door width upto 700mm) with necessary screws complete.
11
-
-
6mm (Six millimeter) Cement Plaster in cement mortar 1:3 (One cement : three sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
288
-
-
15 mm cement plaster in single coat on the rough side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
256
-
-
15 mm (Fifteen millimeter) cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm (Eighty millimeter) in girth and finished even and smooth. Cement mortar 1:6 (One cement : six sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
602.11
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface finish to the surface complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
1028.43
-
-
Distempering (Two or more coats) with dry distemper of approved brand and manufacture of requred shade on new work, over and including wate thinnable priming coat to give an even shade including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
484.71
-
-
Finishing wall with weather proofing cement paint of required shade new work (two or more coats applied @3.84 kg/10sqm) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
256
-
-
Providing and fixing precoated galvanised iron profile sheet (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x55mm) with EPDM seal, upto any pitch in horizontal/vertical or cuved surfaces, excluding the cost purlins, rafters and trusses and including cuttig to size and shape wherever required including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
163.39
-
-
Providing steel work welded in built up sectionframed work, cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. (a) In trusses and trussed purlins in building.
40.85
-
-
b) In grating framed guard, bars ladders, railing, brackets and similar works i/c carriage of materials with in all lead and lift
16.94
-
-
Providing and fixing ridges or hips of width 60cm (Sixty centimeter) over all width plain GS sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete 0.63mm thick with zinc coating not less than 275 gm/m2
42.1
-
-
GI metal ceiling lay in plain tegular edge global white color tiles of size 595 x 595mm and 0.5mm thick with 8mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
8.96
-
-
P/F 15cm wide 45cm overall semicircular plain GI sheet gutter with iron brackets 40 x 30 cm size bolt & nuts and washers i/c making necessary connection with rain water pipe complete in as per design.
44.8
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.) of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
13.5
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
606.75
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
104
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer
5.4
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
27.7
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete size Size of Tile 600x600 mm
215.23
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
26.88
-
-
Construction course rubble hammer dressed U shape open surface drain with side wall 15 x 22cm in cement mortar 1:6 (1cement :6 sand) and inside plastering with cement plaster 1:3 including earth and laying 10cm concrete in 1:5:10 of 40mm nominal size and 7.5cm cement concrete 1:2:4 of 20 mm nominal size and finished with a floating coat of neat cement as per standard design.
62.2
-
-
Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate laid in one layer finished with floating coat of neat cement 50mm thick.
23.45
-
-
Applying priming coat (excluding priming coat) on wood and other wooden surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint other than white.
221.9
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture
221.9
-
-
Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting ready mixed paint brushing red oxide/zink oxide chrome.
147.37
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
290.37
-
-
Providing and fixing color glass for tromble wall 5.5mm thick completion all respect as per rubber washer etc including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
19.2
-
-
12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- laminated conforming to IS : 12823, Grade 1, Type - II marked : for ceiling including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6.93
-
-
Providing and fixing pine wood ceiling of approved quality with butt jointing board 12.5 mm thick including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
95.6
-
-
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
2
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
2
-
-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.: 15 mm dia nominal bore
80
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc: 25 mm dia nominal bore
30
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (a)15 mm nominal bore
13
-
-
(b) 25 mm nominal bore
5
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore
1
-
-
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm
2
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
2
-
-
Providing and fixing 100 mm sand cast Iron grating for gully trap.
4
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
2
-
-
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
2
-
-
Providing and fixing soil, waste and vent pipes : 100mm dia Sand cast iron S&S pipe as per IS: 1729
30
-
-
Providing and fixing soil, waste and vent pipes :75mm dia Sand cast iron S&S pipe as per IS: 1729
40
-
-
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : (a) For 100 mm dia pipe
12
-
-
(b) For 75 mm dia pipe
20
-
-
Providing and fixing plain bend of required degree (a) for 100 mm dia pipe
2
-
-
(b) For 75 mm dia pipe
2
-
-
Providing and fixing single equal plain junction of required degree : (a) 100mm dia sand cast iron S&S pipe as per IS 1729
4
-
-
(b) 75 mm dia sand cast iron S&S pipe as per IS 1729
4
-
-
Providing and fixing collar (a) for 100 mm dia pipe
4
-
-
(b) for 75 mm dia pipe
6
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100mm inlet and 100mm outlet Sand Cast Iron S&S as per IS: 1729
2
-
-
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : (a) 100 mm diameter pipe
30
-
-
(b) 75 mm dia pipe
40
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2000
-
-
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
12
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
4
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
6
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
6
-
-
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
4
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
: 25 mm nominal bore
2
-
-
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25mm nominal bore Horizontal
2
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class esignation 7.5
3
-
-
Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand).Stone ware spout
4
-
-
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100 mm diameter
48
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
104
-
-
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). 30mm red sand stone
36
-
-
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending,welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggretate 20mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer- incharge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal.
360
-
-
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.
100
-
-
Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete: 32 mm long
200
-
-
Cutting in earth work and disposal of excavated earth upto a lead of 2km by mechanical transport.
1352
-
-
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
64.2
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work up to plinth level 1:5:10 (One cement : five sand : ten graded stone aggregate 40 mm (Forty millimeter) nominal size)
10.01
-
-
centering and shuttering including strutting, propping etc. and removal of form for .:- (a) Vertical surface such as wall any thickness partition plaster and string course and like including carriage of materials through all modes of transportation with in all leads and lifts and direction of Engineer-in-Charge.
284.7
-
-
Providing and laying cement concrete 1:4:8 (1cement: 4sand: 8 graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts and direction of Engineer-in-Charge.
157.5
-
-
Providing and laying PVC pipes in weep holes including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. :100mm dia.
209
-
-
Providing and laying stone soling behind the retaining wall complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
31.2
-
-
Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
2
-
-
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc approved by HPPWD (NTC/Ashok Panjla Tiles/NTCCI/Pooja Concrete Fabricators, M/S Dalal Tiles Pvt. Ltd.) with approved color design and pattern including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
23.4
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. : 510x1040 mm bowl depth 250
1
-
-
Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material within all leads and lifts.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements