The Himachal Pradesh State Industrial Development Corporation Limited Tender

(B).columns, pillars, posts and struts square rectangular or polygonal in plan in any height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .

(C). beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth / heights /thickness including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

Providing and laying cement concrete 1:1.5:3 (One cement : one point five sand :Three graded crushed stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. including carriage of materials upto all leads and lifts. (a) Foundations, footings, bases of columns and the like and mass concrete. including carriage of materials upto all leads and lifts.

(B). columns, pillars, posts and struts up to all heights complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

(c). suspended floors, roofs, landing and shelves and their supports balconies beams,girders, bressumers and cantilevers upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

Providing and laying tor steel reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

Providing Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) upto all height 1st Class Bricks including carriage of material within all leads and lifts.

Providing Brick work using common burnt clay building bricks in superstructure 1:6 (1cement:6sand) up to all height including carriage of material within all leads, lifts and heights. 1st class bricks.

Providing and fixing double steel windows side hung, top hung and fixed glazed and wire gauge of standard rolled steel section joints mitred and welded and manufactured or relevant ISI standard specification with 16x3.15mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm size in cement concrete 1:3:6 (1cement:3sand:6graded crushed stone aggregate 20mm nominal size with wooden steel plugs or screws rawl plug opr with fixing clips or with bolts and nuts as required including providing and fixing of projected lugs handles prestaged bolting and fixing 5mm thick glass panes with special metal putty of approved make for glazed windows and wire gauge of IS designation S.S. 85 G with metal beading complete and frame with ISLC 75mm x 40 mm size mild steelTee of 20mm x 12mm for fixing glass pans, angle size 20mm x 20mm and flat size 20mm of Z steel angle 20mm x 12mm or fixed portion as per standard drawings including priming coat of read lead paint and carriage of material within all leads and lifts and other incidential complete in all respect as per instruction of the weight of z section should not be less than 1.60 kg per mtr. including M.S handles 150mm and tower bolts 200mm required complete in all respect including carriage of materials upto all leads and lifts.

15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Rough side exterior cement plaster on wall upto all height with a mixture of sand and gravel or crushed stone graded from 6mm to 12mm nominal size dashed over and including fresh plaster in two coats,backing coat 10mm cement plaster 1:3(1 cement:3 sand)and finishing coat 10mm cement plaster with cement mortar 1:3(1 cement:3 sand)mixed with 10% finely grounded hyderated lime by volume of cement including arriss,chamfers and/or rounded angles not exceeding 80mm in girth. Natural cement finish using ordinary cement. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials upto all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials upto all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth and cement primer complete. including carriage of materials upto all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials upto all leads and lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing i Dome shape with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials upto all leads and lifts

Providing and fixing ridges or hips 60 cm overall with 0.60 mm Thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials upto all leads and lifts. Tata Shakti make.including carriage of materials upto all leads and lifts.

Providing and fixing of M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instructions of the Engineer-in-charge. (weight of sheet not less than 15kg/sqm).including carriage of materials upto all leads and lifts.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paintIn gratings framed guard bars,ladders,railling,brackets,trusses , channel, tea,angle ,MS hollow section , flat,MS Pipe in Dome shape and similar works.including carriage of materials upto all leads and lifts.

Providing and fixing on wall face PVC(D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints withapproved adhesive complete. including carriage of materials upto all leads and lifts.110mm dia pipes including carriage of materials upto all leads and lifts

Providing and fixing accessories for wall face PVC(D-Plast) rain water pipes ie. bends, tee clamps etc. 110mm dia pipes including carriage of materials upto all leads and lifts

Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover &spring. Shutters having width below 3.5 metres.

Providing and fixing 27.5 centimetre long wire spring grade No.2 for rolling shutters including carriage of material within all lead and lifts

Providing and fixing ball bearing for rolling shutters including carriage of material within all lead and lifts

50 mm thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm thick cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement hardner mix : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 parts of cement: 1 part of metallic floor handening compound of approved quality by weight) including finishing complete including carriage of material within all lead and lifts

Providing and laying concrete for plain/ reinforced concrete in open foundations complete as per drawing and technical specification caluses 802,803,1202 and 1203. 1:4:8 (1Cement :4 Sand : 8 greded stone aggregate 20 mm size) including cost of form work and carriage of material within all leads and lifts.

P/F aluminium strips 50mm wide and 3mm thick painted with protective coat of bitumen in joints of floor including carriage of material within all lead and lifts

Excavation in earth work and banking in 20 cm. layers including breaking clods, ramming and dressing ground for the purpose of making embankment or filling up ground depressions upto al lead and lift including carriage of materials upto all leads and lifts.

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material within all leads and lifts.