The Himachal Pradesh State Industrial Development Corporation Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
The Himachal Pradesh State Industrial Development Corporation Limited - HPSIDC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date26 Sep 2022
Closing Date3 Oct 2022
Tender Amount₹ 5,07,68,994
Costs
EMD
₹ 5,00,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
Construction Of Indoor Sports Hall At Pragpur Distt. Kangra (hp). (sh- Civil And Sanitary Installation Work).
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_SIDC_65485_1Bid Award Id
ViewTender No
Job No. 1Tender Authority
The Himachal Pradesh State Industrial Development Corporation Limited ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying and filling in plinth with local sand and under floors including. Watering , ramming consolidating and dressing complete including carriage of material with in all lead and lifts.
131
-
-
Disposal of surplus earth by mechanical transport including loading , unloading for a lead up to 10 Km.
211
-
-
Supplying chemical emulsion in sealed container including delivery as specified chlorpyriphos/ Lindane Emulsifiable containtrate of 20 % including carriage of material with in all lead and lifts.
33
-
-
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termites, treatment ( excluding the cost of chemical emulsion ) Treatment of soil under existing floors using chemical emulsion @ one litre per hole , 300 mm apart including drilling and plugging 12 mm diameter holes with cement morter 1:2 (1 Cement:2 coarse sand) to match the existing floor With chlorpyriphos EC 20% with 1% concentration including carriage of material with in all lead and lifts.
1616
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -all work upto plinth level 1:4:8 ( 1 cement: 4 coarse sand (zone-III):8 graded stone aggregate 40 mm niminal size) including carriage of material with in all lead and lifts.
193
-
-
Providing and laying cement concrete in retaining walls, return walls ,walls (any thickness) including attached pilasters, columns, pieprs, abutments, pillars, post. Struts, buttresses, string or lacing courses, parapets, copingbed blocks, anchor blocks, plin window sills, fillets etc.upto all floors level excluding the cost of centring, suttering and finishing 1:2:4( 1 cement: 2 coarse sand (zone-III):4graded stone aggregate 20 mm niminal size) including carriage of material with in all lead and lifts.
2
-
-
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4( 1 cement: 2 coarse sand (zone-III):4graded stone aggregate 20 mm niminal size) including carriage of material with in all lead and lifts.
143
-
-
Providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers including carriage of material with in all lead and lifts.
37
-
-
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.70 kg. per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including carriage of material with in all lead and lifts.
143
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6( 1 cement: 3 coarse sand (zone-III):6graded stone aggregate 20 mm niminal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand , including finishing the top smooth including carriage of material with in all lead and lifts.
195
-
-
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge including carriage of material within all leads and lift. (a) All work upto plinth level
227
-
-
All works above plinth level upto floor V level.
97
-
-
Providing steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete up to all floor level Thermo- Mechanically Treated bars of grade Fe-500D or more including carriage of material with in all lead and lifts.
39906
-
-
Providing Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation, footing, bases of columns etc.for mass concrete including carriage of material with in all lead and lifts.
204
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of material with in all lead and lifts.
453
-
-
Columns, Pillars, Piers, Abutments,Posts and Struts including carriage of material with in all lead and lifts.
178
-
-
Shelves (Cast in situ) including carriage of material with in all lead and lifts.
8
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide including carriage of material with in all lead and lifts.
1
-
-
Brick work with common burnt clay F.P.S (non modular) bricks of class desigation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material with in all lead and lifts.
48
-
-
Brick work with common burnt clay F.P.S (non modular) bricks of class desigation 7.5 in superstructure in Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material with in all lead and lifts.
1
-
-
Half Brick work masonry with common burnt clay F.P.S (non modular) bricks of class desigation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material with in all lead and lifts.
1
-
-
Half Brick work masonry with common burnt clay F.P.S (non modular) bricks of class desigation 7.5 in superstructure above plinth level upto floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material with in all lead and lifts.
1
-
-
Extra for providing and placing in position 2 Nos 6 mm dia . M.S bars at every third course of half brick masonry including carriage of material with in all lead and lifts.
1
-
-
Providing and fixing 18 mm thick gang saw, cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of requiredsize, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) Joints treated with white cement , mixed with matching pigment, epoxy touch ups, including rubbing,curring, moulding and polishing to edges to give high gloss finish etc.compete at all levels Granite of any colour and shade as per approved by Engineer-in- Charge including carriage of material with in all lead and lifts. (a) Area of slab upto 0.50 sqm
1
-
-
Area of slab over 0.50 sqm
7
-
-
Providing edge moulding to 18 mm thick marble stone counter, vanities etc., including machine polishing to edge to give high gloss finish etc, complete as per design approved by Engineer-in- Charge Granite Work including carriage of material with in all lead and lifts.
1
-
-
Extra for fixing marble/ granite stone over and above corresponding basis item, in facia and drops of width upto 150 mm with epoxy resin based (Araldite or equivalent) adhesive including cleaning etc.complete. including carriage of material with in all lead and lifts.
11
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in platform, vanity counter and similar location in marble/ Granite/ Stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete including carriage of material with in all lead and lifts.
10
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50cm deep and 1.8 cm thick, fixed in uniral partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement conrete 1:2:4( 1 cement: 2 coarse sand (zone-III):4graded stone aggregate 6 mm niminal size) as per direction of Engineer-in- charge and finished smooth Granite Stone of approved shade including carriage of material with in all lead and lifts.
2
-
-
Providing and fixing ISI marked flush door shutters conforming to IS:2202(Part I) non- decorative type, core of block board construction with frameof 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of material with in all lead and lifts.
111
-
-
Providing and fixing decorative high pressure lamminated sheet of palin/ wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality comforming to IS : 2046 Type S,Including cost of adhesive of approved quality 1.0 mm thick including carriage of material with in all lead and lifts.
221
-
-
Providing and fixing aluminium sliding door bolts. ISI marked, anodised (anodic coating not less then grade AC 10 as per IS :1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of material with in all lead and lifts. (a0 250x16 mm
34
-
-
Providing and fixing aluminium tower bolts. ISI marked, anodised (anodic coating not less then grade AC 10 as per IS :1868), transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material with in all lead and lifts. (a) 250x10mm
43
-
-
(b) 100x10mm
16
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less then grade AC 10 as per IS :1868), transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material with in all lead and lifts. (a)125mm
118
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. including carriage of material with in all lead and lifts.
36
-
-
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handle of approved quality for aluminium door, with necessary screws ect complete as per direction of Engineer- in- Charge including carriage of material with in all lead and lifts.
22
-
-
Providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shurtters( overall area of door shutter to measured) including carriage of material with in all lead and lifts.
111
-
-
Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg / m3, 50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in- Charge. including carriage of material with in all lead and lifts.
2188
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-incharge. including carriage of material with in all lead and lifts. (a) 10x80mm
682
-
-
(b) 10x120mm
262
-
-
Steel work welded in built up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required including carriage of material with in all lead and lifts. (a) In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works
1529
-
-
Structural Steel work riveted or bolted in built up sections trusess and framed work including cutting hoisting, rixing in position and applying a priming coat of approved steel primer all complete including carriage of material with in all lead and lifts.
1478
-
-
Steel work in built up tubular trusses including cutting hoisting, rixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete including carriage of material with in all lead and lifts. (a)Hot Finished seamless type tube
2217
-
-
Designing, manufacturing, supplying and erecting Pre- Engineered Multispan building as per spans and sizes indicated in drawings with due consideration of applicable wind loads, seismiczone-IV live load. Dead load, snow loads as per aplicable loads compresing of : a) Roof panels 0.5 mm thick Galvalume sheeling of approved make and labour. B) Providing steel members with 35 DFT Enamel paint c) Providing Secondary steel members finished with 35 DFT Red oxide primer and 35 DFT Enamel painted 35 DFT Enamel paint. At all height and levels including transport tanes, loading,unloading etc.All complete as per drawing and as per direction by the Engineer- in- charge.
1
-
-
Providing and installing 50 mm thick insulation with rock wool 16 Kg /m3 with one side FSK. At all heights and levels including hardware all complete as per drawing and direction of Engineer- in- charge including carriage of material with in all lead and lifts.
1393
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of material with in all lead and lifts. 25 mm thick
198
-
-
Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (Average) thick cement morter 1:3 (1 cement:3 coarse sand) and jointed with gray cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete including carriage of material with in all lead and lifts.
20
-
-
Extra for kota stone / sand stone in treads of steps and risers using single upto 1.05 metre length.
22
-
-
Providing and fixing Ist quailty ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make , in all colour, shades except burgundy, bottle green , black of any size as approved by Engineer-in-charge, in skirting,risers of the steps and dados, over 12 mm thick bed of cement morter 1:3 (1 cement:3 coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm,including pointing in the white cement mixed with pigment of matching shades complete including carriage of material with in all lead and lifts.
379
-
-
Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622 of approved make , in all colour such as white , lvory, gray,FumeRed Brown, liad on 20 mm thick cement mortar1:4 (1 cement:4 coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm,including pointing in the white cement and pigment of matching shades complete including carriage of material with in all lead and lifts.
76
-
-
Providing and laying doublecharged vitrified floor tiles in different sizes (thickness to be specified by the manufactruer ) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades , laid on cement :4 coarse sand ) including grouting the joint with white cement and matching pigments etc. complete including carriage of material with in all lead and lifts. size of tile 600x600 mm
351
-
-
Providing and laying doublecharged vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS 15622, of approved make, in all colours and shade, in skirting ,riser of steps over 12 mm thick bed of cement mortar 1:3(1cement :3 coarse sand ) including grouting the joint with white cement and matching pigments etc. complete including carriage of material with in all lead and lifts. size of tile 600x600 mm
36
-
-
Mirror polishing on marble work / stone work where ever required to give high gloss finish complete including carriage of material with in all lead and lifts.
218
-
-
Providing and laying flamed finish Granite stone floooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawing with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4(1cement :4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade includung rubbing , curing and polishing ect. all complete as specified and as , direction by the Engineer-in- charge including carriage of material with in all lead and lifts. Flamed finish granite stone slab Jet Block,Cherry Red,Elite Brown, Cat Eys of equivalent.
22
-
-
Providing and laying polished Granite stone flooring in required design and patterns , in linear as well as curvilinear portions of the building all complete as per the architectural drawing with 18 mm thick stone slab over 20 mm (average ) thack base of cement mortar 1:4(1cement :4 coarse sand )1:4(1cement :4 coarse sand ) liad and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as , direction by the Engineer-in- charge including carriage of material with in all lead and lifts. Polished Granite stone slab Jet Block,Cherry Red,Elite Brown, Cat Eys of equivalent.
13
-
-
Granite stone slab 18 mm thick in risers of steps,, skirting, dado and pillars laid on 12 mm (Average) thick cement morter 1:3 (1 cement:3 coarse sand) and jointed with gray cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete including carriage of material with in all lead and lifts.
79
-
-
Extra for pre finished nosing to treads of steps of marble stone
20
-
-
Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agreagte) finished with a floating coat of neat cement including cement slurry , etc. but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm niminal size stone agregate including carriage of material with in all lead and lifts.
832
-
-
Siupply and Installation of canadian maple wood sports flooring af approved make , colour , shade and patterns in approved plank sizes Rates shall be inclusive of all types of profiles, skirting 2-3 mm thick approved underlay amterial as per manufacturers recommendatons, Canadian Maple Hardwood Sports Flooring “Certified by the BWF according to BWF standards - Grade 1” LABO SPORTS TEST CERTIFY finished with 21mm thick, 57 to 83mm wide and in random length in tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom 200 side with air pass groove and treated with special anti-termite and water-resistant lacquer. THE UNDER FRAME: - Resilient SPF Pine Wood sleeper subfloor of 70 mm x 45 mm, treated with anti-termite solution and fixed on the bottom side with 10/19 mm thick EPDM rubber pads, stappled through the two wings at 350 mm x 350 mm. INSTALLATION: - IPS subfloor treated with a vapour barrier to be placed on the levelled IPS sub-floor before laying the under frame. The runners having air cushion pads to be placed on the vapour barrier in perfect level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. The expansion of 12-15 mm will be left open between the wooden flooring and the surrounding tiled area / walls. FINISHING: - After installation the floor will be machine sanded in uniform level and finished with 2K SPORT is a two-component water-based polyurethane lacquer for sportive wooden floors. It has been formulated in order to meet the highest anti slip standard requirements for sport wooden floors. ECOSTAR 2K SPORT is in conformity with European standards for sportive wooden floors meeting EN14904 standard's requirements, DIN 18032-2 for slip resistance and it's classified as EN 13501-1. Hardness, distension, chemical and mechanical resistances put 2K SPORT on top of range's quality at all heights and levels all complete as per drawing and as direction by the Engineer-in-charge including carriage of material with in all lead and lifts.
832
-
-
Supply and laying of UNI color & wooden pattern of minimum 6.0 mm thick heterogeneous sports vinyl floor, 3.7 kg per sqm. Roll dimensions 1.5x20.5vertical deformation EN 148093.5mm Energy return NF P 90 203 0.31 m/s, sliding Coefficient EN 13036-4 80to 110, Ball Bounce EN 1223590%, Ball Speed UEFA 50to 65 cm , Abrasion resistance EN ISO 5470-1 1000 mg , Impact resistance EN15178 N/m Indentation resistance EN 1516 0.5 mm, Certified by EHF ,AFC, AVC, IFF & BWF including carriage of material with in all lead and lifts.
372
-
-
Supply and installation of 8 mm thick rubber rolls, enviromental friendly and non toxic recycled, tough and abrasion resistance , SBR base with epdm chips embossed including carriage of material with in all lead and lifts.
67
-
-
12 mm cement plaster in single coat on brick/concrete/stone walls upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smoothcement plaster of mix 1:6 (1 cement : 6 coarse sand) including carriage of materials within all leads, lifts and other incidental.
1
-
-
6mm( Six millimetre) thick Cement plaster to ceiling with Cement mortar 1:3( One Cement:Three Sand) complete upto all floor level as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.
1
-
-
18 mm cement plaster in two coat under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand finished rough with sponge including carriage of materials within all leads, lifts and other incidental.
1
-
-
Finishing wall with textured exterior paint of required shade New Work ( Two or more coats applied @ 3.28 liters/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm including carriage of materials within all leads, lifts and other incidental.
1211
-
-
Wall painting with acrylic emulsion paint Two coats , having VOC ( Volatile Organic Compound) Content less then 50 grams/litre, of approved brand and manufacture including applying additional coats wherever requried, to achieve even shade and colour including carriage of material with in all lead and lifts.
3063
-
-
Painting and synthetic enamel paint of approved brand and manufacture to give an shade Two or more coats on new work including carriage of material with in all lead and lifts.
132
-
-
Providing and fixing 10 mm thick Multi layered polycarbonate sheet system, with AluminiUm Frame work confirming to the detail technical specification as per approved architectural drawing and direction of the Engineer-in charge. (Aluminium frame work shall be paid separately as per relevant item of the BoQ.) including carriage of material with in all lead and lifts.
134.45
-
-
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle precoated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be prepainted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in- Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/ mK including carriage of material within all lead and lift.
143
-
-
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) including carriage of material within all lead and lift.
105
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) including carriage of material within all lead and lift.
278
-
-
Water Proofing: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of :- 1st course of applying cement slurry@or 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) including carriage of material within all lead and lift.
22
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of material within all lead and lift. (a) For Fixed Portion For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
964
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
2149
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
190
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-incharge complete. Upto 5mm depth and 5 mm width including carriage of material within all lead and lift.
660
-
-
Providing and Fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete Powder coated minimum thickness 50 micron aluminium including carriage of material within all lead and lift.
102
-
-
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge Powder coated minimum thickness 50 micron aluminium including carriage of material within all lead and lift.
102
-
-
Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming toAISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7 / STAAD PRO-V8i / Architek V 2.5.16 / Revit architecture -2011 or equivalent. Proper usage of ConnectionAccessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance withASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming toAISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above including carriage of material within all lead and lift.
21871
-
-
Providing and fixing of external wall system on Light gauge steel frame work with . Outer face having 6mm thick heavy duty fiber cement board fixed on 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm and internal face 12.5mm thick gypsum plaster board fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately) including carriage of material within all lead and lift.
1211
-
-
Providing and fixing of internal wall system on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately) including carriage of material within all lead and lift.
977
-
-
Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per National Building Code 2009 complete as per direction of Engineer-in-charge including carriage of material within all lead and lift.
1211
-
-
Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm including carriage of material within all lead and lift.
120
-
-
Providing and fixing of external thermal insulation and composite system with First layer of selfextinguishing type Expanded Polystyrene (EPS) insulation boards of 120 mm thick ( max 1mX0.5m section), confirming to IS 4671:1984, having thermal conductivity of 0.034 W / mK, (measured as per IS 3346- 1980), density of 20-24 kg / m³ measured as per IS 5688- 1982, Fire retardant property self-extinguishing type as per EN 13501- 1, bonded with special polymer modified cementitious adhesive confirming to EOTA ETAG 004 (European Technical Approval) formulated to bond polystyrene insulation boards to typical mineral substrate (according to ETAG 004) and Polypropylene mechanical fasteners with plastic pin confirming to EOTA ETAG 014 (European Technical Approval) having dia 10mm & L=200mm on finished level wall and the junction between two adjacent EPS boards to be sealed with low expansion moisture cure Polyurethane Foam.Second Layer consists of Fiberglass mesh covered with alkali-resistant coating, mass per unit area 145 gm/m2, mesh size: 3.9x4.0 mm ±10% embedded in special polymer modified cementitious Base Coat with hydrophobes and the corners will be protected with Corner-beads with alkali-resistant mesh wings at least 10 cm wide, mesh mass per unit area min 145 gm/m2. The surface will be levelled, finished, made smooth complete in all respect as per manufactures specification and as per directions of Engineer-in-Charge including carriage of material within all lead and lift.
1211
-
-
Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately) including carriage of material within all lead and lift.
577
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid including carriage of material within all lead and lift.
10
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap including carriage of material within all lead and lift.
14
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer including carriage of material within all lead and lift.
1
-
-
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required White glazed fire clay kitchen sink of size 600x450x 250 mm including carriage of material within all lead and lift.
2
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore including carriage of material within all lead and lift.
10
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore including carriage of material within all lead and lift.
8
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore including carriage of material within all lead and lift.
60
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe including carriage of material within all lead and lift. (A)32 mm dia
14
-
-
(b) 40 mm dia
10
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material within all lead and lift.
25000
-
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. including carriage of material within all lead and lift.
10
-
-
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of material within all lead and lift.
10
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms including carriage of material within all lead and lift.
8
-
-
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms including carriage of material within all lead and lift.
8
-
-
Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all lead and lift.
14
-
-
Providing and fixing toilet paper holder C.P. brass including carriage of material within all lead and lift.
10
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge including carriage of material within all lead and lift.
6
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth White Agaria Marble Stone including carriage of material within all lead and lift.
6
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 45 cm length including carriage of material within all lead and lift.
60
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter including carriage of material within all lead and lift.
8
-
-
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge 15 mm nominal dia including carriage of material within all lead and lift.
8
-
-
Providing and fixing C.P brass twin coat hooks fixed on toilet door with CP brass screws including carriage of material within all lead and lift.
10
-
-
Providing and fixing health faucet with 1m PVC tube and Swivel hook including all fittings complete including carriage of material within all lead and lift.
10
-
-
Providing and fixing of Stainless Steel Grab bar 600 mm long compiete with brackets fixed to PVC rawl plug with C.P. Brass screws complete in all respects including cutting and making good the walls required including carriage of material within all lead and lift.
2
-
-
Providing and fixing Vertical or horizontal storage type hot water heater fixed to wall with anchor bolts & nuts,15 mm CP brass angle stop cock and 15 mm CP brass non-return valve complete including making connections with 15mm dia CP connecting pipes on inlet and outlet, suitable lenght of pawer cable and 15 amps plug including carriage of material within all lead and lift. (a) 15 Ltr Cap.
1
-
-
(b) 25 Ltr Cap.
4
-
-
Providing & fixing water purifier cum water cooler made of stainless steel having storage capacity of 80 liter & cooling capacity 60 liter/ hour with Reverse osmosis syetem & ultra voilet membrane TDS reductioin 90% having automatic back wash system with filtration unit& all other requried accessories complete in all respect as per direction of the Engineer in charge including carriage of material within all lead and lift.
2
-
-
Providing and fixing UPVC 6kg/cm2 Soil, Waste & RWP pipes(IS:13592 Class B)including all fittings (Plain or door) e.g. Bends, junction, cowls, offsets, access pieces as per IS: 14735 jointing with rubber cing/Solvent cement joints including cutting chase or holes in walls and floors and making good wherever required including carriage of material within all lead and lift. (a) 90 mm outer dia
20
-
-
(b) 110 mm outer dia
350
-
-
© 160 mm outer dia
20
-
-
Providing and fixing UPVC waste pipes 6 kg/cm2 for WB, SINK, URINAL, FD (IS:4985 class III) including all fitting (plain or door) e.g. Bends, junction, cowls,offsets,access pieces as per IS: 4985 jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors and making good wherever required including carriage of material within all lead and lift. (a) 40 mm outer dia
30
-
-
(b) 50 mm outer dia
20
-
-
© 63 mm outer dia
30
-
-
Providing and fixing in position upvc P" or S" trap of self cleaning design of following sizes for the embedded areas making proper connection with chemical sealent joint, cutting chase/ hole in floors/ slabs and bringing the same in proper condition in cement concrete 1:2:4 mix complete as required. including cost of cutting and making good the walls and floors wherever required including carriage of material within all lead and lift. (a) 110 mm inlet and 110 mm outlet
30
-
-
Providing & fixing in position upvc floor drain including cost of cutting and making good the wall and floors wherever required including carriage of material within all lead and lift. (a) 110 mm inlet and 63 mm outlet
15
-
-
Providing and fixing UPVC inlet fitting with maximum 3 inlets 32,40or 50 mm size fabricated from 110 mm dia UPVC pipes and fixed to upvc sockets, fixed to upvc trap with chemical sealent joint and set in cement concrete as per standard drawing complete including carriage of material within all lead and lift.
30
-
-
Providing and fixing upvccleanout plug(Ceiling or floor) with suitable insert keys for opening, male threded joint with upvc socket fixed to uPVC pipe complete in all respects including carriage of material within all lead and lift. (a) 110 mm dia
6
-
-
160 mm dia
4
-
-
Providing and fixing Stainless Steel Grade (304)grating with ring and stainlesssteel anti cockroach basket and two SS screw including fixing to the floor with cement mottar including carriage of material within all lead and lift.
45
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. including carriage of material within all lead and lift. (a) 15 mm dia nominal bore
20
-
-
(b) 20 mm dia nominal bore
60
-
-
(b) 25 mm dia nominal bore
40
-
-
© 32 mm dia nominal bore
60
-
-
(d) 40 mm dia nominal bore
60
-
-
50 mm dia nominal bore
120
-
-
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work including carriage of material within all lead and lift. (a) 15 mm dia nominal bore
20
-
-
20 mm dia nominal bore
60
-
-
25 mm dia nominal bore
40
-
-
32 mm dia nominal bore
60
-
-
40 mm dia nominal bore
60
-
-
50 mm dia nominal bore
120
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. including carriage of material within all lead and lift. (a) 15 mm dia nominal bore
200
-
-
20 mm dia nominal bore
100
-
-
25 mm dia nominal bore
50
-
-
32 mm dia nominal bore
20
-
-
40 mm dia nominal bore
20
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore including carriage of material within all lead and lift.
1
-
-
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main 20 mm nominal bore including carriage of material within all lead and lift.
1
-
-
Providing and fixing Themoflex or cereflex thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expended synthetic rubber over pipes of followings nominal bores and thickness including all requried accessories complete as per specification including carriage of material within all lead and lift. 9 mm thick (pipe insidethe toilet) : For 15 mm dia pipe
60
-
-
For 20 mm dia pipe
30
-
-
Providing , fixing , testing and commissioning of motorised butterfly valve of following dia for filling of overhead water tank complete with high and low level control switches to control tanks. The level controllers shall be installed in overhead tanks. The level switch will close the valve when water tank level is low. the system should be complete in all respects with accessories 220 V AC/ 24 V DC IP67 electric water level control unit, copper control wiring in whether proof casing etc. (Make: Belimo/Audco/Advance/AIP) including carriage of material within all lead and lift. (a) 40 mm dia pipe
1
-
-
50 mm dia pipe
1
-
-
Providing and fixing full way lever oprated forged brass ball valve of brass body with forgedc brass hard chromplated steel ball tasted to a pressure not less than 15 kg/sqcm with threaded/ flanged joints complete with nuts, gaskets,washers etc. including carriage of material within all lead and lift. (a) 15 mm dia
2
-
-
20 mm dia
2
-
-
25 mm dia
2
-
-
32 mm dia
2
-
-
40 mm dia
6
-
-
50 mm dia
6
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work including carriage of material within all lead and lift. (a) 40 mm dia nominal bore
50
-
-
(b) 50 mm dia nominal bore
50
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality including carriage of material within all lead and lift. (a) 40 mm dia nominal bore
50
-
-
(b) 50 mm dia nominal bore
50
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of material within all lead and lift.
2
-
-
Providing and fixing full way lever operated forged bras ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 15 kg/Sqcm with threaded/ flanged joints complete with nuts, bolts, gaskets, washers etc. including carriage of material within all lead and lift. (a) 40 mm dia nominal bore
2
-
-
(b) 50 mm dia nominal bore
2
-
-
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete including carriage of material within all lead and lift. (a) 150 mm diameter
20
-
-
(b) 200 mm diameter
60
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design including carriage of material within all lead and lift. (a)150 mm diameter S.W. pipe
100
-
-
(b) 200 mm diameter S.W. pipe
60
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material within all lead and lift.
6
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material within all lead and lift. : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material within all lead and lift.
8
-
-
Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material within all lead and lift.
4
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material within all lead and lift.: Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material within all lead and lift.
4
-
-
Extra for depth for manholes Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material within all lead and lift.
2
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia including carriage of material within all lead and lift.
240
-
-
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design including carriage of material within all lead and lift.
40
-
-
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material within all lead and lift.
1
-
-
Constructing 5x2x1 mtr( Effective Depth) internal dimension brick masonary septic tank with 1st clas bricks in cement mortar 1:4 (1Cement:4 Course Sand ) RC top Slab with 1:2:4 mix (1Cement: 2 Course sand:4 graded stone aggregate 20 mm nominal size ) inside and outside plastering 12mm thick with cement mortar 1:3 ( 1cement; 3 Coarse Sand ) finished with a floating coat of neat cement inside and rough plaster outside , 2 nos. 150 mm dia SW Tees, 3 No. 600x600 mm size SFRC Manhole cover with frame, necessary baffle walls, 100 mm dia 2100 mm high SCI vent pipe with cowl, complete as per drawing, including excavation refilling and disposal of surplus earth including carriage of material within all lead and lift.
1
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete including carriage of material within all lead and lift. (a) 150 mm dia. R.C.C. pipe
80
-
-
250 mm dia. R.C.C. pipe
80
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design including carriage of material within all lead and lift. (a) 250 mm diameter S.W. pipe
80
-
-
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material within all lead and lift.
20
-
-
Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material within all leads and lifts.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements