The Himachal Pradesh State Industrial Development Corporation Limited Tender

Providing and applying of tack coat using bitumen emulsion confirming to IS:8887, using emulsion pressure distributor including preparing the surface & cleaning with mechanical broom. Rapid setting bitumen emulsion On WMM : @ 0.4kg/sqm

On Bituminous surface @0.25kg/sqm including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge

Providing and laying butuminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, tyransported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to te required grade, level and alignment and rolling with smooth wheeled, vibratory and tendem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of engineer-in-charge: With bitumen of grade VG-30 @3.6% (percentage by weight of total mix) prepared in Batch type hot Mix plant of 100-120 TPH capacity.

Providing and laying butuminous concrete using crushed stone aggregates of specified grading premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to te required grade, level and alignment and rolling with smooth wheeled, vibratory and tendem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of engineer-in-charge: With bitumen of grade VG-30 @5.5% (percentage by weight of total mix) using and cement filler @3% (percentage by weight of aggregate) prepared in Batch type hot Mix plant of 100-120 TPH capacity.

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade and colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals,oils, grease and foreign material etc. complete as per direction of engineer-in-charge and accordance with applicable specifications.

Providing and fixing Glow studs 3M of size 100x100x20 mm made of heavy duty body shall be moulded ASA (Acrylic Styrene Acryloretrite) or HIP ( high imapact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The glow stud shall support a load of 13635 kg tested in accoprdance with ASTM D 4280. The slope of retro-reflective surface shall be 35 (+/-5) degrees to base. the reflective panels on both sides with atleast 12 cm of reflective area up each side. the luminance intensity should be as per the specification and shall be tested as decribed in ASTM I: 809 s recommended in BS: 873 part 4 : 197. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.

Providing and fixing post delineators made of ABS round body fitted with 2 nos. 100mm dia high reflectve reflectors and mounted on MS pipe of 65 mm dia dully powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.

Earth work in excavation by mechnical means (Hydroulic excvator or manual means) in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 mtr,including getting out the excavated soil and disposal of surplus excavation soil and disposal of surplus excavated soil as directed with all leads and all kind of soil.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering in all work upto plinth level. (a) P/l cement concrete 1:4:8 (1cement:4sand :8 graded stone aggregate 40mm nominal size)

P/l cement concrete 1:3:6 (1cement:3sand :6 graded stone aggregate 20mm nominal size)including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge

P/l cement concrete 1:2:4 (1cement:2sand :4 graded stone aggregate 20mm nominal size) including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge

Steel work welded in built up sections,trusses and framed work including cutting,hoistingm,fixing in position and applying a priming coat of read lead paint in:-(a) In gratings framed guard bars,ladders,railing brackets and similar works including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and laying of interlocking concrete paver block ISI mark pavements asper drawing and technical specification clause 1504 including carraige of material with in all leads and lifts.Coloured blocks red,yellow and grey. 80mm thick. including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge

Surface dressing of ground including removing vegetation and in equalites not exceeding 15cm deep and disposal of rubbish lead upto all leads and lifts in all kind of soil including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and laying in position specified grade of reinforced cement concrete including the cost of centering and shuttering in all work upto plinth level. (a) P/l cement concrete 1:2:4 (1cement:2sand :4 graded stone aggregate 20mm nominal size) including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge

Centring and shuttering including strutting ,proping etc. and removal of form work for.walls any thickness including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge

Steel reinforcement for R.C.C. work i/c straighting ,cutting bending,placing in position and binding all complete above plinth level. Thermo-mechanically treated bars of grade Fe-500D or more including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material within all leads and lifts.