Temple Trust Shri Naina Devi Ji Tender

Providing and fixing of fancy bracket of sizes 1.5 ft.x25mm dia shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as required. (ISI make) Complete In all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.

Providing and fixing removable cover for access and testing earthing with copper earth plate 600 mmx600 mm x 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (With charcoal or coke and salt), coated in silicone grease and wrapped with den so tap, earthing electrode complete as required in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.

Supplying and fixing automatic L.T. C.R. Panel 415 volts ,current 4000 amp ,phase single & three phase ,frequency 100, Ip rating 42,55,65 ,capacity depends range 400-500,timer, MCB, SMCB, main switch, Change over having size 4 feetX1.5feet X 5 feet with MS sheet having thickness 2mm , with opening double door with locking arrangement and embedding in cement concrete Plate form having size 5feetX2ffetX2feet complete. both as required complete in all respect as per the best satisfaction of Engineer In Charge. If sme other requirment in panel it should be fixed in panel . Make:-Havells, Philips ,Switch and Gear box , Crompton make (All material used in panel should be ISI make of above company).

Providing and fixing Electric pole 10 to 15 feet Length with base plate of 300mmx300mmx10mm size having dia 10mm bottom, 7.5 cm in center & 50 mm dia at top. The size of foundation should be 0.75x0.75mtr.X0.75mtr. In foundation concrete 1:5:10 having thickness 10 cm. & R.C.C. block 1:2:4 having size 60cmx60cmx60cm. Including errection of pole with best satisfaction of Engineer-in-charge with bar bed fencing with nails up to 60cm ht nails size should be 7.5 cm @ 10 cm c/c including applying priming coat and aluminum paint complete in all respect.

Supplying and fixing 50 mm dia G.I. pipe in pedestal Path between shed to shed with complete welding and providing additional support as required complete in all respect by providing barbed wire fencing and nails having size 7.5 Cm @10 cmc/c long with complete welding at the top of pipe including painting priming coat & aluminums paint complete in all respect .(ISI make)

Providing fixing & fabrication mild steel iron bracing required design as per drawing for vertical support of GI pipes from one shed to another shed & supporting tray at different locations by providing vertical support including priming coat & painting with aluminums paint complete in all respect where required barbed fencing & nails should be provided including nuts & bolts/welding complete as required.(ISI make)

Providing and fixing Cable Tray Made of galvanized steel size 150mmx10mmx3mm with assembly supporting flange fixing at intervals 1.20 meters C/C to support cable tray. Cable tray support size should be 250 x 50 x 5 min fixing with truss to hold bracket/flange with Nuts & Volts or complete welding. It should be complete by all means with painting etc. Make:- Informeka , Trade XL , Rapid flow (ISI make from make mentioned)

Supplying and fixing aluminum cable 4x35mm Temperature range flexing -5°C to +50°C , fixed installation -40°C to +70°C , Insulation and sheath-compound of thermoplastic PVC , Nominal voltage U0/U 0,6/1 kV ,Test voltage 4 kV, Test voltage 4 kV , Minimum bending radius single-core 15x cable Ø multi-core 12x cable Ø Core insulation of PVC Tests compound type DIV4 to HD 603 S1 , Cores stranded in concentric layers Highest permissible voltage , Permissible short circuit temperature , Common core sheath, Direct current systems 1,8 kV , Alternating current systems, • Single-phase systems, Single-phase systems one outer conductor earthed 0,7 kV , Three-phase systems 1,2 kV as required. Outer dia should be app.28.5, Aluminum wt per Km should be 406 kg /per KM. at. Gross wt should not less than 1120Kg.Per Km. J type part 32303, AWG No. 2. Make:- Havells , Compton , anchor (ISI make from mentioned makes).

Supplying and fixing male & female contact 10 Amp -270 volts Connection type 3 ways as required. (ISI make)Complete In all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.

Supply and erection of cement concrete muff of approximate size 30"X15" fabricated from 1:2:4 cement concrete mixture and duly painted with double coat white cement paint. Complete In all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.