Temple Trust Shri Naina Devi Ji Tender

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 percent and confirming to IS:15622 of approved make in old colours and shades laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS:15477 in average 6MM thickness including grouting of joints laid on adhesive including grouting the joint with wild cement and matching pigments etc complete within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a)size of tile 800x800 mm (a) Simpolo make.

15 mm cement plaster on rough side of single or half brick wall of mix:- 1:6 (1 cement: 6 coarse sand) within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge.

Wall painting with acrylic premium emulsion paint, having VOC (Volatile Organic Compound )content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour (a) Two coats within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge (a) Asian make .

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc, complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic:- With toughened glass panes of 8 mm thickness (weight not less than 12.50 kg/ sqm) within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge (a) Jindal ISI make.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:- 1:2:4 (1 cement: 2 coarse sand): 4 graded stone aggregate 20 mm nominal size) within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) All work upto plinth level.

Providing and fixing CP brass bib cock of approved quality confirming to IS:8931 within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) All work upto plinth level. (a) 15 mm nominal bore (a) jaiquor make.

Providing and faxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, ie. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainlens steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) Jindal ISI make.

Constructing masonry chamber 60x60x75 cm inside, in brick work in cement motor 1:4 (1 cement 4 coarse sand) for sluice valve with CI surface box 100 mm dope diameter ,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RC top slab 1:2:4 mix (1 cement 2 coarse sand 4 graded stone aggregate 20MM nominal size) i/c necessary excavalion foundation concrete 1:5:10(1 cement 5 line sand graded stone aggregate 40MM nominal size) and inside plastering with cement motor 1:3(1 cement 3 coarse sand 12 mm thick , finished with a floating coat of neat cement complete as per standard design.( with common burnt clay FPS (non modular) brick of glass designation 7.5 within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge.

(b) 20MM dia nominal bore within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) Jindal B class Hissar make.

P/f CP brass shower rose with 15MM over 20MM inlet within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (i)150MM dial

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fetting arrangement of approved quality and colour-:(a) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88MM weighing not less than 170 grammes within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge.

P/f Fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked fixing with approved adhesive etc complete (finolex or equivalent make) within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a)75MM dia pipes (a) jaiquor make.

Providing and fixing CP brass single lever telephonic wall mixer of quality and make as approved within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge.(a) 15 mm nominal dia

Providing and fixing PTMT soap dish holder having length of 138 mm. breath 102 mm ,height of 75MM with fitting concealed fitting arrangements weighing not less than 106 grammes within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge.

(b)110MM dia pipes.( finolex or equivalent make) within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) Jindal B class Hissar make.

Providing and fixing 600x450 MM beveled edge mirror of superior glass of approved quality complete with 6 mm thick hardboard ground fixed to wooden cleats with CP brass screws and washers complete within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. saint Gobain make.

Hall brick masonry in common bumt clay F.P.S. (Non modular) building bricks of class designation 7.5 in super structure above plinth level up to floor V level (a) Cement mortar 1: 4 (1 cement: 4 sand) within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) All work upto plinth level comtete 2nd Class bricks

Providing and fixing duel purpose vitreous China water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and and brackets 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge (a) Hindware make.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 percent and confirming to IS:15622 of approved Brand and manufacturer in all colours and shades, in skirting riser of steps laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS:15477 in average 6MM thickness including grouting of joints laid on adhesive including grouting the joint (Payment for crowding of joints to be made separately) within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a)size of tile 800x800 mm.(a) Simpolo make.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) All work upto plinth level. ISI make.

Providing and fixing white vitreous China pedestal for washing basin completely recessed at the back for the reception of pipes and fittings within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) Hindware make.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) In all kinds of soil

P/f PVC floor trap of self cleaning design with grating without vent arm complete i/c cost of cutting and making goods in the wall and floor of finolex equivalent makewithin all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) 110x75 mm nominal diameter (a) Heavy duty.

Providing and fixing GI pipes complete with GI fitting and clamps , i/e making good the walls etc concealed pipe including painting with anti corrosive bitumastic paint cutting cheese and making good the world within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) All work upto plinth level.(a)15MM dia nominal bore (a) Jindal B class Hissar make.

Providing and fixing 8 MM Dia CP/SS jet with flexible tube up to 1 metre long with ss triangular plate to European type WC of quality and make as approved by Engineer in charge

Centering and shuttering including strutting,Propping etc, and removal of form for suspended, floor, roofs, landings, balconies and access platform within all lead & lifts, complete in all respect as per direction of Engineer-in-charge.

Providing and flexing wash basin with CI brackets, 15 mm dia CP brass single hole mixer of approved quality and make including painting of fitting and brackets cutting and making good the walls wherever required a white various China Wash Basin size 550x400MM with 15 mmcp brass single hole basin mixer within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge.

Providing and fixing CP brass angle valve for Basin Mixer and Geyser point of approved quality confirming to IS:6931A15 mm nominal bore within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge. (a) All work upto plinth level (a) jaiquor make.

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete within all leads and lifts as per direction and best satisfaction of Engineer-in - Charge (a) ISI make.