Temple Trust Shri Naina Devi Ji Tender

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

Centering and shuttering including strutting, propping etc. and removal of form for :- Suspended floors, roofs, landings, balconies and access platform complete in all respect within all leads and lifts as per direction and best satisfaction of Engineer- in charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) ISI make

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Sal wood 1st. quality.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling complete in all respect as per direction and best satisfaction of Engineer-in- charge :- (a) Kiln seasoned selected planks of sheesham wood (i) 35 mm thick shutter.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows. Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Float glass panes (i) 5 mm thick glass pane (weight not less than 10 kg per sqm.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. ( a) 35 mm thick shutters (i) Kiln seasoned selected class of sheesham wood

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. ( i) 100x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) 125 mm

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) 250 mm weighing not less than 150 gms

6 mm cement plaster of mix :-1:3 (1 cement : 3 fine sand) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Cement mortor 1:3.

15 mm cement plaster on rough side of single or half brick wall of mix:- 1:4 (1 cement: 4 coarse sand) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Cement mortor 1:4.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) ISI Birla or J.K.make

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content :- With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Two coats.

Finishing walls with Acrylic Smooth exterior paint two coats of required shade :- New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Asian Paint

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. Two or more coats on new work (a) Asian Paint

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :-1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Kajaria or Nitco make Size of tile 600x600 mm or size as specified by Engineer-in- Charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.(a) Kajaria or Nitco make or size as specified by Engineer-in- Charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) size of tile 500x500 mm complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Kajaria or Nitco make or size as specified by Engineer-in- Charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) 25 mm thick

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) 0.63 mm thick with zinc coating not less than 275 gm/ m² and Tata or Durashine make

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) ISI make

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) 0.63 mm thick with zinc coating not less than275 gm/m² and Tata or Durashine make

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with (a) GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and, perforation complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

Providing and fixing duel purpose vitreous China closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.(a) Cera make model color white commode ceramic backline floor mounted sheet size 26"x14"x29" complete in all respect.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550 x 400 mm with a 15 mm CP Brass single hole basin mixer complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) White Vitreous China Wash basin brand-bazzle kitchen colour brown material engineered wood size 450x610x 450 wall mounted, modern with one cabinet which not less than 30 kg. Cera make

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.(a) Cera make.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (a) Kohlar luxe jet spray health faucet polished chrom.)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Saint Gobain

Providing and fixing toilet paper holder complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) C.P. Brass (a) Nova or Hindware make

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (a) 150 mm complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge (a) Nova or Hindware make weight not less than 500 gm.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour :- (a) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. .

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :(a) 100 mm inlet and 75 mm outlet complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (i) Sand cast iron S&S as per IS - 398 (a) Nova or Hindware make Heavy duty

Providing and fixing soil, waste and vent pipes : (a) 100 mm dia (i) Sand cast iron S&S pipe as per IS:(1729 complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) ISI make.

Providing and fixing soil, waste and vent pipes complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) 75 mm diameter ISI make (i) Sand cast iron S&S pipe as per IS: 1729

Providing and fixing plain bend of required degree.(a) 100 mm dia complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (i) Sand cast iron S&S as per IS - 1729

Providing and fixing plain bend of required degree.(a) 75 mm dia complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (i) Sand cast iron S&S as per IS - 1729

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :-75x75x75x75 mm complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (i) Sand cast iron S&S as per IS - 1729

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) 15 mm dia nominal bore Jindal B class ISI make

(b) 20 mm dia nominal bore complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Jindal B class ISI make

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Sintex make double layer

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) 15 mm nominal bore (a) Nova or Hindware make

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) 15mm nominal bore (a) Nova or Hindware make

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. : (a) With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5 complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.