Rural Development Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Rural Development Department - RDD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Feb 2023
Closing Date1 Mar 2023
Tender AmountRefer Documents
Costs
EMD
₹ 3,05,100Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_DRDPR_69320_1Bid Award Id
ViewTender No
3947-3951Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying, mechanically mixed and vibrated cement concrete 1:4:8 (one cement:four sand eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
22.57
-
-
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with :Cement mortar 1:5 (one cement : five coarse sand)including all leads and lifts of materials in foundation and plinth including carriage of material as required in all leads & lift and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
40.63
-
-
Random rubble masonry with hard stone of approved quailty in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm ( twenty millimetre )nominal size) upto plinth level with Cement mortar 1:6 (one cement : six coarse sand) as required in all leads & lift including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
12.32
-
-
Stone soling/boulder filling dry hand packed in under floor as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
46.88
-
-
Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters )so as to give a fair finish including centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete workincluding carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. in :
-
-
-
Foundation ,footing basis of columns etc. And mass concrete as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
82.5
-
-
Columns, pillars ,posts and struts square, rectangular or polygonal in plan as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
19.44
-
-
Beams cantilever girders and lintels side and soffits of beams, beams haunchings, cantilevers, bressumers and lintels any depth in all heights from floor as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
32.82
-
-
Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness , all as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
426.1
-
-
Vertical surface such as walls(any thickness) and the like including attached pilasters, buttersses plinth and string courses and the like including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
3.84
-
-
Form work in edges of slab and breaks in floor and walls under 20 cm wide as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
123.9
-
-
Demolishing R.C.C. work manually/ by mechanicalmeans including stacking of steel bars and disposal of unserviceable material within if any metres lead as per direction of Engineer - in- charge including carriage and other incidentals complete in all respect as per direction .
3.11
-
-
Making plinth protection 50mm (fifty millimetre ) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm ( twenty millimetre ) nominal size) over 75mm (seventy five milimetre ) thick bed of dry brick ballast 40 mm (forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.including carriage and other incidentals complete in all respect as per direction of Engineer-in-Charge.
34.44
-
-
Providing and laying local stone over plinth protection laid over and jointed with grey cement slurry complete with base of cement mortar 1 : 4 ( one cement : four coarse sand).: average thickness 20mm ( twenty millimetre ).including carriage and other incidentals complete to the entire satisfaction of Engineer-in-Charge.
34.44
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability .including carriage and other incidentals complete to the entire satisfaction of Engineer-in-Charge.
-
-
-
All works upto plinth level
30.36
-
-
all works upto plinth level upto any floor level
47.79
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto any level.Thermo-Mechanically Treated bars of grade Fe-500D or more.including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
8776.92
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to any floor level in all shapes and sizes in cement mortar 1:6 (one cement : six sand) including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
10.24
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five)in superstructure above plinth level up to any floor level.in Cement mortar 1:4 (one cement : four coarse sand)including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
100.68
-
-
Providing first clast deodar wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately),including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
6.27
-
-
Providing 40x5 mm ( forty into five )milimetre flat iron hold fast 40 cm (forty centimetre) long including fixing to frame with 10 mm ( ten milimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm ( thirty into ten into fifteen ) centimetre 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
290
-
-
Providing and laying local stone 40 mm (forty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) :25 mm ( Twenty five Millimetre) thick flooring including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
361.42
-
-
Providing and laying local stone over 20 mm ( Twenty millimetre )thick in risers of steps, skirting, dado and pillars laid on 12 mm ( twelve millimetre ) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
16.34
-
-
Providing and laying 40 mm ( fourty millimetre ) Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) 20 mm ( (twenty millimetre) nominal size finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
11.25
-
-
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm ( twenty millimetre ) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
3.68
-
-
Providing edge moulding to 18 mm ( eighteen Millimetre)thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.: Marble work, including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
5.54
-
-
Providing and fixing 10cm. (ten centimetre )to 12cm (twelve Centimetre ). thick Dhajji walls wrought on both sides excluding plastering and pointing but including 12 mm ( twelve Millimetre) to 20 mm ( twenty Millimetre) mesh wire netting on wooden frame and painting two coats on wood work with wooden reservative including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
401.22
-
-
Providing and laying local stone over 20 mm ( Twenty Millimetre ) thick in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal Three ) kilgo gram per Square metre including grouting the joints with white cement and matching pigments etc., complete:
26.69
-
-
Providing and laying local stone over 20 mm thick in different sizes(thickness to be specified by manufacturer), with waterabsorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cementmortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal Three ) kilgo gram per Square metre including grouting the jointwith white cement & matching pigments etc. complete
87.02
-
-
Providing and fixing panelled or panelled and glazed shutters for doors , including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately): Ist Class Deodar wood, 35mm ( thirty Five Millimetre )thick shutters.
43.56
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in charge. (Note:- Butt hinges and necessary screws shall be paid separately) First Class Deodar wood.35 mm ( thirty Five Millimetre ) thick shutters including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
111.22
-
-
Providing and fixing Wooden plank with suitable screws for wooden plank in ceiling etc. complete (frame work to be paid seperatately)complete as per Engineer-in-Charge. Ist Class Deodhar wood including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
189.38
-
-
Providing and Laying 25 mm ( twenty Five Millimetre ) wooden planking tongued and grooved, in flooring fixing to wooden base frame with iron screws complete (base wooden frame to be paid separately) Ist Class Deodhar wood including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
331.1
-
-
20 mm ( twenty millimetre) cement plaster in two coats under layer 15 mm thick cement plaster 1:4 (one cement : five coarse sand) finished with a top layer 5 mm thick cement plaster with a neat cement including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
42.98
-
-
Providing and laying 20mm ( twenty millimetre )mud plaster with choppedstraw @ 33kg/Cu.M.of earth intwo coats backing coat 15mm (fifteen millimetre ) thick and finishing coat 5mmthick on brick/stone masonrywalls for interior plasteringupto floor two level includingarrises,internal roundedangles,chamfers and / orrounded angles not exceeding80mm in girth and finished even and smooth. including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
513.57
-
-
Structute Steel work in built up tubular fixed with or without connecting plate (round, square or rectangular hollow tubes etc.) trusses and frame work etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
21414.71
-
-
Providing and fixing 15 cm (fifteen millimetre ). wide 45 cm (Forty Five centimetre ). overall semicircular plain G.I. Sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. Including making necessary conections with rain water pipe complete as per design 0.63mm thick sheet.including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
68.6
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm (one hundred ten millimetre ) diameter including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
55.8
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
-
-
-
Coupler, 110mm (one hundred ten millimetre )
12
-
-
Bend 87.5° 110mm(one hundred ten millimetre ) bend
12
-
-
Shoe 110mm (one hundred ten millimetre )
12
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm ( fifteen centimetre) diameter and weighing not less than 440 grams. including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
12
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete.:110 mm(one hundred ten millimetre ) including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
48
-
-
Providing and fixing aluminium sliding door bolts, ISImarked anodised (anodic coating not less than gradeAC 10 ( ten as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete : 250X16 mm (two hundred fifty into sixteen )millimetre including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
16
-
-
Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 asper IS : 1868 ) transparent or dyed to required colour orshade, with necessary screws etc. complete including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
-
-
-
200x10 mm(two hundred into ten )millimetre
15
-
-
150x10 mm(one hundred fifty into ten )millimetre
122
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
-
-
-
125 mm mm(one hundred twenty five )millimetre
32
-
-
100 mm ( one hundred ) millimetre
22
-
-
6 mm(six millimeter)thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand as per direction of engineer-in- charge including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
192.29
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
192.29
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UVresistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
192.29
-
-
French spirit polishing :Two or more coats on new works including a coat of wood filler including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
187.62
-
-
Constructing course rubble hammer dressed "U" shape open surface drain with side wall 15X22cm ( fifteen Into Twenty two )centimetre in cement mortor 1:6 (one cement: six sand) and in side plastering with cement plaster 1:3 (one cement : three sand ) including earth work and laying 10cm (Ten Centimetre) cement concrete 1:5:10 (one cement :five sand:ten graded stone aggregate 40mm (Forty millimetre) nominal size) and 7.5cm cement concrete 1:2:4(one cement :two sand ;four graded stone aggregate 20mm (Twenty millimetre) nominal size) and finishing with a floating coat of neat cement and curing complete as per standard design including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
32.5
-
-
Providing and fixing 1st class deodar wood eaves board 200mmx25mm ( Two hundred into twenty five millimetre )thick including fixing in position including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
89.64
-
-
Providing wood work in trusses,purlins,rafters,posts, post plates,wall plates and the like wrought framed,hoisted and fixed in position.:first class Deodar wood.including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
9.6
-
-
Providing and fixing Slate roofing with 7.5 cm ( seven point five) centi lap double layer fixed on wooden battens (wood work to be paid for separately):60 cm x30 cm( sixty into thirty ) centimetre size. 0.60mm thick prepainted insulated steel sheet sand-wich puf roofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating,the thickness of puff should not be less than 5 mm and wt.of puff shoud be 35-37 kg per cu.m. i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
259.28
-
-
Providing and fixing ridges or hips 60 cm sixty centimetre overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
32.07
-
-
Providing and fixing valley 90 cm ( ninty centimetre )overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns ( twenty microns over 5 five microns primer coating back coat of polyster of 5 five microns over 5 five microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm six millimetre dia with prepainted G.I. limpet and bitumen washers complete with all accessories including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
6.88
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
175
-
-
Providing and fixing Polished stainless steel SS 304 Grade. grills of required pattern in frames of steel windows by welding / including all fitting accessories complete (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.). including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
456.82
-
-
Providing and fixing ISI marked Stainless steel single acting spring hinges with necessary screws etc. complete : 75 ( seventy five ) including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.mm
130
-
-
Providing and fixing Stainless steel double acting spring hinges with necessary screws etc. complete. 150mm (one hundred fifty) millimetre including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
78
-
-
Providing and fixing 6.25 mm x 7.5 cm (sixty two into five into fifty millimetre) hand rails in 1st class Indian teak wood straight length complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
10.4
-
-
Providing and fixing Ist quality GRC/ Unistone wall cladding conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm ( twelve milimetre ) thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg (three. three kiligram) per sqm, including pointing in white cement mixed with pigment of matching shade complete..including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
176.58
-
-
Providing and fixing in wall lining / paneling /dado with panels of 12 mm (twelve millimetre )thick MARINE PLY ISI marked with 4 mm ( four milimetre ) thick veneers laminates ( Teak ply ) to be polished or flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, along with wood frame work consisting of battens 4cmx4cm ( four into four ) centimetre size 60cm ( sixty centimetre) centre to centre spacing both sides fixed with rawl plug and drilling necessary holes for rawl plug etc.and Decorative first class kiln seasoned teak wood beading out of 25x12mm ( twenty five into twelve) milimetre ,isection with wood screws including mitring at junctions and Decorative first class kiln seasoned teak wood cornice out of 75x60mm( seventy five into sixty ) millimetre section with wood screws to be polished including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
47.4
-
-
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten) millimetre dia complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
50
-
-
Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
5
-
-
Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC Collar ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
2
-
-
Supplying and fixing C.I. cover without frame for manholes 455x610 mm ( four hundred fifty five into six hundred ten) millimetre rectangular C.I. cover (medium duty) the weight of the cover to be not less than 23 kg ( Twenty three kilogram )complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
2
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work:- complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
-
-
-
15 mm nominal bore (fifteen millimetre)
15
-
-
20 mm nominal bore ( twenty millimetre)
10
-
-
Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc including carriage of materials with in all leads, lifts and other incidentals
-
-
-
1216 (16 mm dia ) pipe ( sixteen millimetre)
30
-
-
1620 (20 mm dia) pipe ( twenty millimetre)
20
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including testing of joints complete as per direction of the engineer in charge. including carriage of materials with in all leads, lifts and other incidentals 2000 ( two thousand litre)
2000
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre (ten litre ) low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid: Universal type water closed of size 570x460x380mm , Cat. No. S1053106 "S" trap with Ceranglo Deluxe Seat cover of snow white shade of CERA with in all leads and lifts of material and other incidentals as per direction of the Engineer-in-Charge.
7
-
-
Providing and fixing toilet paper holder C P Brass with flap guard Cat.No. F5003110 of CERA as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre ) C.P. brass pillar taps, 32 mm ( thirty two millimetre ) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Wash basin of size 630x450x290mm (Cat. No. S2040104 of CERA) with full pedestal of height 820mm ( eight hundred twenty millimetre) (Cat. No. S2090101 of CERA) as per direction of Engineer-in-charge. including testing of joints complete as per direction of the engineer in charge. including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm ( one hundred ten )including testing of joints complete as per direction of the engineer in charge.
-
-
-
150 mm dia. ( one hundred fifty millimetre )
5
-
-
110 mm dia. (one hundred ten millimetre )
30
-
-
75 mm dia. ( seventy five millimetre )
20
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm (twenty five to forty millimetre) nominal bore including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall et cincluding carriage of materials with in all leads, lifts and other incidentals.
1
-
-
Constructing masonry Chamber 30x30x50 cm ( thirty into thirty into fifty ) centimetre inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (one hundred into one hundred into seventy five ) millimetre (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm ( twenty millimetre ) nominal size),including necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm fourty millimetre nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm ( twelve millimetre )thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. (seven point five )including carriage of materials with in all leads, lifts and other incidentals.
4
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre ) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five millimetre ) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre ) long screws, rawl plugs etc., complete.including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Providing and fixing PTMT liquid soap container 109 mm ( one hundred nine millimetre ) wide, 125 mm ( one hundred twenty five millimetre ) high and 112 mm ( one hundred twelve millimetre ) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms( one hundred five grams ) Kent touchless Sanitiser/ Liquid soap Dispenser-1000ml (one thousand milimetre), white.including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Providing and fixing PTMT soap Dish Holder recessed type stainless steel No. 1531 of Hotelier Series of JAQUAR or ESS. having length of 138mm ( one hundred thirty eight millimetre ), breadth 102mm ( one hundred two millimetre ) , height of 75mm (seventy five millimetre ) with concealed fitting arrangements, weighing not less than 106 gms ( one hundred five millimetre ): including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).including carriage of materials with in all leads, lifts and other incidentals.
1
-
-
Providing and fixing 115 mm (one hundred fifteen millimetre ) nominal bore, 86 mm long, weighing not less than 88 gms PTMT concealed stop cock with flange of Jaguar and approved quality and colour as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
14
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre (one metre )long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions : 45cm (forty five millimetre ) length 15 mm ( fifteen millimetre ) nominal bore including carriage of materials with in all leads, lifts and other incidentals.
7
-
-
Providng and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) of 25 mm ( twenty five millimetre ) nominal bore as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
2
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm( fifteen millimetre ) nominal bore including carriage of materials with in all leads, lifts and other incidentals.
2
-
-
Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm ( one hundred ten into ninety millimetre ) including carriage of materials with in all leads, lifts and other incidentals.
14
-
-
Providing and fixing brass ferrule with C.I. mouth coverincluding boring and tapping the main 15 mm ( fifteen millimetre ) nominal bore including carriage of materials with in all leads, lifts and other incidentals.
2
-
-
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
-
-
-
150mm dia ( one hundred fifty millimetre )
2
-
-
110mm dia (one hundred ten millimetre )
5
-
-
75mm dia ( seventy five millimetre )
3
-
-
Providing and fixing a PVC plain bends ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
-
-
-
110mm dia (one hundred ten millimetre )
2
-
-
150mm dia ( one hundred fifty millimetre )
10
-
-
75mm dia ( seventy five millimetre )
20
-
-
Providing and fixing PVC door bend with oval access door insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts ISI market complete including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
-
-
-
110mm dia (one hundred ten millimetre )
2
-
-
150mm dia ( one hundred fifty millimetre )
10
-
-
75mm dia ( seventy five millimetre )
20
-
-
Providing and fixing PVC Cowel ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
-
-
-
150mm dia ( one hundred fifty millimetre )
1
-
-
110mm dia (one hundred ten millimetre )
1
-
-
75mm dia ( seventy five millimetre )
1
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre ) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete.complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
-
-
-
110mm dia (one hundred ten millimetre )
10
-
-
75mm dia ( seventy five millimetre )
5
-
-
150mm dia ( one hundred fifty millimetre )
5
-
-
Providing and fixing brass ferrule with C.I. mouth coverincluding boring and tapping the main 15 mm ( fifteen millimetre ) nominal bore including carriage of materials with in all leads, lifts and other incidentals.
14
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm ( six hundred ninty grams fifteen millimetre )nominal bore complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
14
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm ( three hundred into three hundred millimetre ) size (inside) the weight of cover to be not less than 4.50 kg four point fifty and frame to be not less than 2.70 kg as per standard design:
4
-
-
Constructing brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven decimal five )circular type manhole 0.91 m ( zero decimal nineone metre ) internal dia at bottom and 0.56m (zero decimal five six metre ) dia at top in cement mortar 1:4 (one cement : four coarse sand), inside cement plaster 12 mm ( twelve millimetre ) thick with cement mortar 1:3 ( one cement : three coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 40 mm ( forty millimetre nominal size), and making necessary channel in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm ( twenty millimetre nominal size) finished with a floating coat of neat cement, 0.91 m ( zero point nine one metre ) deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm ( five hundred sixty millimetre ) internal diameter con- forming to I.S. 12592, total weight of cover and frame to be not less than 182 kg ( one hundred eighty two kilogram ), fixed in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm ( twenty miilimetre )nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm ( twelve millimetre ) thick cement plaster at the external surface shall be paid for separately) :complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
1
-
-
Providing and fixing Towel rack with singe rail no. 1581 HOTELER SERIES OF JAQUAR or ESS-ESS as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
7
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm ( thirty two millimetre ) dia. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals
7
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements