Rural Development Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Rural Development Department - RDD Tender
Civil And Construction
Consultancy Services
Civil And Architectural Services
Eprocure
Opening Date2 Nov 2023
Closing Date16 Nov 2023
Tender Amount₹ 4,52,33,562
Costs
EMD
₹ 4,85,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Block Development Office Building At Sujanpur Distt. Hamirpur (h.p.)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_DRDPR_80972_1Bid Award Id
ViewTender No
zpbangana832-36Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing and laying cement concrete work M-25 design mix to obtain the minimum compresive strength 25N/mm2 and minimum cement content not less than 400 kg/cubic meter mechanically mixed and vibrated and curing complete as per approved specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, base of colums, and the like mass cooncrete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.
336.21
-
-
Providing and laying cement concrete work M-25 design mix to obtain the minimum compresive strength 25N/mm2 and minimum cement content not less than 400 kg/cubic meter mechanically mixed and vibrated and curing complete as per approved specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in wall of any thickness but not less than 0.10 metre( zero point one) thickness including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.
255.75
-
-
Providing and laying cement concrete work M-25 design mix to obtain the minimum compresive strength 25N/mm2 and minimum cement content not less than 400 kg/cubic meter mechanically mixed and vibrated and curing complete as per approved specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in Beams, suspended floors, roofs having slope up to 15° (fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.
473.26
-
-
Providing and laying cement concrete work M-25 design mix to obtain the minimum compresive strength 25N/mm2 and minimum cement content not less than 400 kg/cubic meter mechanically mixed and vibrated and curing complete as per approved specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in Arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° (fifteen degree) up to all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.
10.35
-
-
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation,. Footings bases of columns and mass concrete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.
277.44
-
-
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etcetera. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
1022.77
-
-
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etcetera. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
1307.85
-
-
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
1227.56
-
-
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in plain in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
827.37
-
-
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
111.93
-
-
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
522.64
-
-
Providing and laying Thermo -Mechanically treated bars of grade Fe_500D tor steel of TATA,TISCO, SAIL, Jindel steel, Kamdhenu steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and cost of dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
162711.8
-
-
Second class brick work using common burnt clay F.P.S. (non modular) building bricks of class designation 7.5 (seven point five) in foundation and plinth in cement mortar 1:6 (one cement isto six coarse sand) as per PWD specification drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
7.56
-
-
Second class brick work using common burnt clay F.P.S. (non modular) building bricks of class designation 7.5 (seven point five) in super structure above plinth level upto all floor lavels in all shapes and sizes in cement mortar 1:6 (one cement isto six coarse sand) as per PWD specification drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
252.36
-
-
Second class half brick work using common burnt clay F.P.S. (non modular) building bricks of class designation 7.5 (seven point five) in building bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure above plinth level upto all floor lavels as per PWD specification, drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
841.16
-
-
Dry Stone pitching 22.05 cm thick including supply of stones and preparing surface complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
570.93
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. Granite stone shall be got approved from engineer incharge before use.
31.39
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
17
-
-
Providing and fixing White Agaria Marble Stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size)up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
5.4
-
-
Providing and fixing Glazing with glass pan 5mm(five point five millimeters)thick plain glass panes with beading complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
173.03
-
-
Providing and fixing 35mm thick (thirty-five mili metres) Kiln seasoned and chemically treated hollock wood glazed shutters for doors, windows and clerestory windows using 4 mm (four mili metre) thick glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
116.64
-
-
Providing and fixing Extr for frosted glass panes 4 mm (four milimeter) thick instead of ordinary float glass panes 4 mm (four milimeter) thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
12.89
-
-
Providing and fixing 35mm (thirty five milimeter) thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
91.2
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm (twenty-five milimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
91.2
-
-
Providing and fixing 35mm (thirty-five mili metre) thick wire gauge shutters of well seasoned hollock wood using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one point four milimeter)in both directions with wire of dia 0.63 mm (zero point sixṭy three mili meter), for doors, windows and clerestory windows with hinges and necessary screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
116.64
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.Fixed to openings /wooden frames with rawl plugs screws including priming coat with approved steel primer and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
3664.64
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (seven hundred one to one thousand mili metre), with double speed adjustment with necessary accessories and screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
26
-
-
Providing and fixing 200x10mm (two hundred X Ten mili metres) bright finished brass tower bolts (barrel type) with screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
100
-
-
Providing and fixing 100x10mm (one hundred X Ten mili metres) bright finished brass tower bolts (barrel type) with screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
848
-
-
Providing and fixing 50 cm (fifty centimetre) long bright finished brass kicking plate of size 100x3.15 mm (one hundred X three point fifteen mili metre), with necessary screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
39
-
-
Providing and fixing 100mm (one hundred mili metres) bright finished brass handles with screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
424
-
-
Providing and fixingbright finished brass hanging type floor door stopper, with necessary screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
45
-
-
Providing and fixing bright finished brass casement stays (straight peg type) , with necessary screws etc.complete.200mm (two hundred mili metre) weighing not less than 240gms (two hundred forty grams) complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
212
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
300.3
-
-
Providing and fixing to existing door frames. 30 mm (thirty mili metre) thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm (three mili metre) thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm (five mili metre) thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
50.72
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (twenty x ten x two millimeter)and braced with flat iron diagonals 20x5 mm(twenty x five milli meter) size, with top and bottom rail of T-iron 40x40x6 mm (forty x forty x six milli meter) with 40 mm (forty millimeter)dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
41.19
-
-
Providing and fixing 1mm (one mili metre) thick M.S. sheet door with frame of 40x40x6 mm (forty x forty x six milli meter) angle iron and 3 mm (three mili metre) M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm (forty x forty x six milli meter) for diagonal braces complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
41.85
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm (twenty seven point five centi metre) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm (eighty x one point twenty five milli meter) M.S. laths with 1.25 mm (one point twenty five milli meter) thick top cover complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
71.94
-
-
Providing and fixing ball bearing for rolling shutters complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
14
-
-
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ LType sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer,Fixing with 15x3 mm (fifteen x three milli meter) lugs 10 cm (ten centi metre) long embedded in cement concrete block 15x10x10 cm(fifteen x ten centi meter x ten centi meter) of C.C. 1:3:6 (one Cement : three coarse sand : six graded stone aggregate 20mm (twenty mili metre) nominal size)as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
10580
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.Hot finished welded type tubes complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. .
16484.8
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
1664.5
-
-
Providing and laying 52 mm (fifty two mili metre) thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty mili metre) nominal size) and top layer 12 mm (twelve mili metre) thick cement hardener consisting of mix 1:2 (one cement hardener mix : two graded stone aggregate six mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
285.16
-
-
Providing and laying Granite stone slabs 18 mm (eighten mili metre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (tweleve mili metre) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
71.5
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred x thirty hundred mili metre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty mili metre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
111.04
-
-
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve mili meter) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. .
505.16
-
-
Providing and laying vitrified floor tiles 600x600mmx10mm (six hundred mili metre x six hundred mili metre x ten mili metre) thick with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty mili metre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. The sample of tiles shallbe got approved from engineer incharge before use.
1038
-
-
Providing and laying Vitrified tiles 600x600x10mm (six hundred mili metre x six hundred mili metre x ten mili metre) thick , with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve mili metre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. The sample of tiles shallbe got approved from engineer incharge before use.
65.45
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen mili metre) thick stone slab over 20 mm (twenty mili metre) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. (Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.)
537.32
-
-
Providing and fixing 110mm dia (one hundred ten mili metre) with minimum pressure of 4.5kg (four point five kiligram) on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten mili metre) gap for thermal expansion, (i) Single socketed pipes as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
116.6
-
-
Providing and fixing 110mm bend (one hundred ten mili metres)on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten mili metre) gap for thermal expansion as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
6
-
-
Providing and fixing 110mm shoe (one hundred ten mili metres)on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten mili metre) gap for thermal expansion as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
6
-
-
Providing and fixing 110mm (one hundred ten mili metres) unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty X fifty X fifty mili metres) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
60
-
-
Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating of back coat of polyster of 5 microns over 5 microns primer coating Tata/ Sail/ Reliance/ Jindal including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-In-charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
502.89
-
-
Providing and fixing Ridges plain (500 - 600mm) (five hundred - six hundred mili metre) precoated galvanised steel sheet roofing accessories 0.50 mm (zero pont fifty mili metre) (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
42.6
-
-
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm (five hundred ninty five x five hundred ninty five mili metre) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm (twenty four x thirty eight mili metre) made from 0.30 mm (zero point thirty mili metre) thick (minimum) sheet, spaced at 1200 mm (one thousand two hundred mili metre) center to center and cross "T" of size 24x25 mm (twenty four x twenty five mili metre) made of 0.30 mm (zero point thirty mili metre) thick (minimum) sheet, 1200 mm (one thousand two hundred mili metre) long spaced between main "T" at 600 mm (six hundred mili metre) center to center to form a grid of 1200x600 mm (one thousand two hundred x six hundred mili metre) and secondary cross "T" of length 600 mm (six hundred mili metre) and size 24x25 mm (twenty four x twenty five mili metre) made of 0.30 mm (zero point thirty mili metre) thick (minimum) sheet to be interlocked at middle of the 1200x600 mm (one thousand two hundred x six hundred mili metre) panel to form grids of 600x600 mm (six hundred x six hundred mili metre) and wall angle of size 24x24x0.3 mm (twenty four x twenty four x zero point three mili metre)and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm (twenty seven x thirty seven x one point six mili metre) fixed to ceiling with 12.5 mm dia (twelve point five mili metre)and 50 mm (fifty mili metre) long dash fasteners, 4 mm (four mili metre) GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm (eighty five x thirty x zero point eight mili metre) spaced at 1200 mm (one thousand two hundred mili metre) center to center along main T, bottom exposed width of 24 mm (twenty four mili metre) of all T-sections shall be prepainted with polyester paint, all complete for all heights as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 12.5 mm (twelve point five mili metre) thick square edge PVC Laminated Gypsum Tile of size 595x595 mm (five hundred ninty five x five hundred ninty five mili metre), made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm (zero point sixteen mili metre) thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
284.8
-
-
Providing and fixing M.S BP sheet 1.66 mm to 2 mm (one point sixty six mili metre to two mili metre) thick in eaves board / facia / soffit / ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instructions of engineer in charge ( base members of steel work shall be measured and paid separtely) complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
145.64
-
-
6mm(six millimeter)thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand as per direction of engineer-in- charge including carriage of material with In all leads , lifts in all floors and other incidentals completes
1898.4
-
-
15mm (fifteen millimeter) thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement :six sand )complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
4564.84
-
-
Providing and applying white cement based putty of average thickness 1 mm (one mili meter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
5305.39
-
-
Distempering two coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
5305.39
-
-
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
1112.09
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
1176.67
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
1157.85
-
-
Providing and fixing Brass 100mm (one hundred mili metre) mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
66
-
-
Providing and fixing 12 mm(twelve mili meter) thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
11.3
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC ,kitchen and the like consisting of 1st course of applying cement slurry @4.40kg mixed with water proofing compound confirming to IS 2645 in recommended proportions including rounding of junctions of vertical and horizontal surfaces 2nd course of 20mm (twenty mili metre) cement plaster 1:3(one cement:three sand) mixed with water proofing compound in recommended proportions including rounding of junctions of vertical and horizontal surfaces 3rd course of applying blown or residual bitumen applied hot at 1.7kg/sqm of area 4th course of 400 micron thick PVC sheet(overlaps at joints of PVC sheets shouldbe 100mm (one hundred mili metre) wide and pasted to each other with bitumen at 1.7kg/sqm) complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
198.82
-
-
Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm (Twelve millimeter)thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm(twenty one millimeter) thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm (fifty x twenty five x two mili metre) using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.
The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured, complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. .
16.78
-
-
Providing and fixing Uni stone 12mm (Twelve milimetre) thick cladding on wall side as on faces of Arch masonry walls etcetra 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding etc. complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
1157.85
-
-
Providing and fixing stainless steel door handles of size 1000mm (one thousand millimeter) long and 50 mm(fifty millimeter) thick rod with SS screws etc .complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
4
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) :six graded stone aggregate 20 mm nominal size) over 75mm(seventy five milimetre) thick bed of dry brick ballast 40 mm (forty mimi metre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
23.58
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) hindware/jaguar/cera with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
15
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) hindware/jaguar/cera with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china orissa pattern W.C. pan of size 580x440mm (five hundred eighty x four hundred forty mili metre) with integral type foot rests complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
4
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin hindware/jaguar/cera of 430x260x350 mm( four hundred thirty X two hundred sixty X three hundred fifty milimeters)and 340x410x265 mm (three hundred forty X four hundred ten X two hundred sixty five milimeters) sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 lt. white P.V.C automatic flushing cistern complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
8
-
-
Providing and fixing White Vitreous China Wash basin hindware/jaguar/cera size 550x400 mm (five hundred fifty X four hundred mili meters)with a pair of 15 mm (fifteen mili metre) C.P. brass pillar taps wash basin with C.I. brackets, 15 mm (fifteen mili metre) C.P. brass pillar taps, 32 mm (thirty two mili metre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
19
-
-
Providing and fixing white vitreous china pedestal for wash basin hindware/jaguar/cera completely recessed at the back for the reception of pipes and fittings complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
19
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink 510x1040 mm (five hundred ten x one thousand forty mili metre) bowl depth 225 as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty mili metre), including all fittings and 32mm dia (thirty two mili metre) CP brass waste and painting of fittings and brackets, cutting and making good the walls wherever required, complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
4
-
-
Providing and fixing 8 mm dia (eight mili metre)C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
15
-
-
Providing and fixing 32mm dia (thirty two mili metre) P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
23
-
-
Providing and fixing 100 mm (one hundred mili metre) CP Brass grating for gully trap complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
48
-
-
Providing and fixing 600x450 mm (six hundred x four hundred fifty mili metre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six mili metre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
19
-
-
Providing and fixing 600x120x5 mm (six hundred x one hundred twenty x five mili metre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm forty mili metre) long screws, rawl plugs etc. complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
19
-
-
Providing and fixing C.P. Brass toilet paper holder complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
19
-
-
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
1
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm ( fifteen mili metre) nominal bore complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
19
-
-
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm ( fifteen mili metre) nominal bore complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
14
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm ( fifteen mili metre) nominal bore complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
14
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931: 15 mm ( fifteen mili metre) nominal bore complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
76
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931:15mm ( fifteen mili metre) nominal bore complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
7
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) (fifteen mili metre x fifty mili metre) of approved make and quality complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
200
-
-
Providing and fixing on terrace (at all floor levels) P.V.C. SINTEX water storage tank (Tripple Layer) having capacity 1000 (One thousand) liters each ISI 12701 marked with G.I. inlet and outlet connection, 15mm (Fifteen millimetre) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level within all leads, lifts of material and other incidentals.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6000
-
-
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five x six hundred ten mili metre) internal dimensions, total weight of cover with frame to be not less than 38 kg (thirty eighty kilogram) (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (one cement : one point five Fine sand : three graded stone aggregate 20 mm (tweny mili metre) nominal size), foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty mili metre) nominal size), inside plastering 12 mm (twelve mili metre) thick with cement mortar 1:3 (one cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
-
-
-
Inside dimensions 455x610 mm (four hundred fifty five x six hundred ten mili metre) and 45 cm (forty five centi metre) deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
Inside dimensions 500x700 mm (five hundred x seven hundred mili metre) and 45 cm (forty five centi metre) deep for pipe line with one or two inlets :
5
-
-
Inside dimensions 600x 850 mm (six hundred x eight hundred fifty mili metre) and 45 cm (forty five centi metre) deep for pipe line with three or more inlets :
5
-
-
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five x six hundred ten mili metre) internal dimensions, total weight of cover with frame to be not less than 38 kg (thirty eighty kilogram) (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (one cement : one point five Fine sand : three graded stone aggregate 20 mm (tweny mili metre) nominal size), foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty mili metre) nominal size), inside plastering 12 mm (twelve mili metre) thick with cement mortar 1:3 (one cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Extra for depth beyond 45 cm (forty five centi metre) of brick masonry chamber
-
-
-
For 455x610mm (four hundred fifty five x six hundred ten mili metre) size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
For 500x700 mm (five hundred x seven hundred mili metre) size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
For 600x850 mm (six hundred x eight hundred fifty mili metre) size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
-
-
-
15 mm (fifteen mili metre) nominal outer dia Pipes
500
-
-
20mm (twenty mili metre) nominal outer dia Pipes
100
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m (one metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge
-
-
-
15 mm (fifteen mili metre) nominal outer dia Pipes
100
-
-
20 mm (twenty mili metre) nominal outer dia Pipes
100
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
15 mm (fifteen mili metre) nominal outer dia Pipes
50
-
-
20mm (twenty mili metre) nominal outer dia Pipes
50
-
-
Providing and fixing PPR Union 20mm (twenty mili metre)
50
-
-
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm (fifty x five mili metre) flat of specified shape, projecting 75 mm (seventy five mili metre)outside the wall surface and fixed on wall with 4nos, 6mm dia (six mili metre) expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm (thirty mili metre x one point six mili metre ) galvanised M.S. flats of specified shape and of total length 420 mm (four hundred twenty mili metre) and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm (twenty five x six mili metre), one bolts on each side of the pipe.
Total bracket length 580 mm (five hundred eighty mili metre) of approved shape and design for single 100 mm dia (one hundred mili metre) pipe
100
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.
-
-
-
15 mm (fifteen mili metre) dia nominal bore
50
-
-
20 mm dia (twenty mili metre) nominal bor
50
-
-
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the walls and floors complete.
-
-
-
110mmx90mm (one hundred ten mili metre x ninty mili metre)
24
-
-
110mmx75mm (one hundred ten mili metre x seventy five mili metre)
24
-
-
Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive.
-
-
-
110mm dia (one hundred ten mili metre)
250
-
-
75mm dia (seventy five mili metre)
250
-
-
Providing and fixing PVC single equal branch with oval access door ISI marked insertion rubber washer 3mm thick boalts and nuts complete including fixing with approved adhesive complete.
-
-
-
110mm (one hundred ten mili metre)
50
-
-
75mm (seventy five mili metre)
50
-
-
Proving and fixing PVC door bend with oval access door insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete
-
-
-
110mm (one hundred ten mili metre)
50
-
-
75mm (seventy five mili metre)
50
-
-
Providing and fixing PVC collars ISI marked including fixingwith approved adhesive etc. complete
-
-
-
110mm (one hundred ten mili metre)
50
-
-
75mm (seventy five mili metre)
50
-
-
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete
-
-
-
110mm (one hundred ten mili metre)
50
-
-
75mm (seventy five mili metre)
50
-
-
Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. Brass screws complete including carriage of material with all leads and lifts.
19
-
-
Providing and fixing C.P. Brass towel rail of size 600mmx20mm (six hundred mili metre x twenty mili metre) complete with C.P. Brass brackets fixed to wooden plugs with CP brass screws complete including carriage of material with all leads and lifts.
19
-
-
Providing and fixing PVC "Y" junction with oval access door,insertion rubber washer 3mm (three mili metre)thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete
-
-
-
110mm dia (one hundred ten mili metre)
50
-
-
75mm dia (seventy five mili metre)
50
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements