Rural Development And Panchayat Raj Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Rural Development And Panchayat Raj Department Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Nov 2024
Closing Date25 Nov 2024
Tender Amount₹ 2,03,38,864
Costs
EMD
₹ 4,42,800Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of District Panchayat Officer, Kangra At Dharamshala Staff Quarters, Zila Parishad At Dharamshala, Distt. Kangra H.p.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_DRDPR_95263_2Tender No
rdd dshala 1165-70Tender Authority
Rural Development And Panchayat Raj Department ViewPurchaser Address
-Website
http://https://www.tnrd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
42.1
-
-
Providing and laying cement concrete 1:5:10 (One cement isto five sand isto ten graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
18.7
-
-
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five niewton per square millimetre) with cement contents not not less than @ 360 kg/cum (at the rate Thre hundred sixty kilogram per cubic metre) or as per approved design mix. All works upto plinth level to give a smooth machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
37.5
-
-
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five niewton per square millimetre) with cement contents not not less than @ 360 kg/cum (at the rate Thre hundred sixty kilogram per cubic metre) or as per approved design mix. All works above plinth level to all floor level to give a smooth machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
425.6
-
-
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
82.1
-
-
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
710.2
-
-
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
615.4
-
-
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts Circular in plan including mouldings, cornices etcetera complete as per Architectural drawing, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
220.1
-
-
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Stair cases (except spiral stair cases) with slopping or stepped soffits excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all heights leads, lifts and other incidentals and as directed by the Engineer-in-charge including incidents. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
37.67
-
-
Providing tor steel reinforcement for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
57670.4
-
-
Second class brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
185.1
-
-
Second class brick masonry work 7 cm (senen centimetre) thick with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:3 (One cement isto three coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
8.4
-
-
Half brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:4 (One cement isto Four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
170.5
-
-
Random rubble masonry with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement isto Six coarse sand isto Twelve graded stone aggregate 20mm (Twenty millimetre) nominal size upto plinth level including raking out joints in cement mortar 1:6 (One cement : Six coarse sand) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
74.4
-
-
Coursed rubble masonry with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement isto Six coarse sand isto Twelve graded stone aggregate 20mm (Twenty millimetre) nominal size upto plinth level including raking out joints in cement mortar 1:6 (One cement : Six coarse sand) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
20.1
-
-
Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
11.87
-
-
Providing and fixing 30mm (thirty millimetre thick) 2nd (Second) class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
251.2
-
-
Providing and fixing 30mm (thirty millimetre thick) 2nd (Second) class teak wood Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one decimal four millimetre) in both directions with wire of dia 0.63 mm (zero decomal six three millimetre), for doors, windows and clerestory windows with hinges and necessary screws complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
202.1
-
-
Providing and fixing 25mm (twenty five millimetres) thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters including fixing of 5.0mm (four point zero millimetre) thick glass panes weight not less than 12.50 kg / sqm (twelve decimal fifty kilogram per square metre) with beading & Nickel plated mild steel hinges with screws etcetra complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
261.4
-
-
Providing 40x5 mm (forty into five millimetre) flat iron hold fast 40 cm (forty centimetre) long including fixing to frame with 10 mm (ten millimetre)diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 mix (one cement isto three coarse sand isto six graded stone aggregate 20mm nominal size) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
480.2
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg (thirty six to eight kilogram) and door width from 701 mm to 1000 mm) (seven hundred one to onbe thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
-
-
Providing and fixing M.S. grills of require pattern in wooden/steel frames of windows etcetra with M.S. Flats, square or round bars with round headed bolts and nuts or by screws complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1576.2
-
-
Providing and fixing 18mm (eighteen millimetre thick) flat pressed 3 (three) layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
126.6
-
-
Providing and fixing 18mm (eighteen millimetre thick) Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted withpolyurethane primer (fittings to be paid separately) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
78.12
-
-
Providing and fixing 30mm (Thirty millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type , core of black board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters including black enameled M.S butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
111.3
-
-
Providing and fixing 25mm (twenty five millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type , core of black board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters including black enameled M.S butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
53.2
-
-
Providing and fixing to existing door frames 30mm (Thirty millimetre) thick factory made Prelaminated PVC door shutter consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19x19mm (Nineteen into nineteen millimetre) for styles and 15x15mm (Fifteen into fifteen millimetre) for top & bottom rails, (Code no 9.120 ) of Rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm (Thirty millimetre) thickness, 70mm (Seventy millimetre) width out of which 50mm (Fifty millimetre) shall be flat and 20mm (Twenty millimetre) shall be tappred in 45 (Forty five) degree angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetre) wide, PVC sheet out of which 75mm shall be flat and 20mm (Twenty millimetre) shall be tapered in 45o (Forty five degree) on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimetre) wide PVC sheet out of which 75mm (Seventy five millmetre) shall be flat and 20mm (Twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetre) thick, 20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive includingfixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundred into fifty into One point nine zero millimetre) size with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
22.06
-
-
Providing and fixing 18 mm (eighteen millimetre) thick, 150 mm (one hundred fifty millimetre) wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm (six millimetre) coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm (twenty five into three millimetre) M.S. Flat 10 cm (ten centimetre) long fixed to pelmet with hollock wood cleats of size 100mm x 40 mm x 40 mm (one hundred millimetre into forty millimetre into forty millimetre) on both inner side of pelmet and rawl plugs 75 mm (seventy five millimetre) long etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
109.65
-
-
Providing and fixing Stainless steel curtain rail with rollers stop ends and brackets in pelmets with curtain rod of 25 mm (Twenty five millimetre) diametre and brackets etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
21
-
-
Providing and fixing bright finished brass 100 mm (one hundred ten millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
56
-
-
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etcetra complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
14
-
-
Providing and fixing 125mm (One hundred twenty five millimetres) nominal size brass handle with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
42
-
-
Providing and fixing 75mm (seventy five millimetres) nominal size brass handle with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
42
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
56
-
-
Providing and fixing 300x10mm (three hundred into ten millimetre) bright finished brass tower bolts (barrel type) with necessary screws complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
24
-
-
Providing and fixing 200x10mm (two hundred into ten millimetre) bright finished brass tower bolts (barrel type) with necessary screws complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
240
-
-
Providing and fixing 200x10mm (two hundred into ten millimetre) bright finished brass tower bolts (barrel type) with necessary screws complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
240
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal diametre 140 mm, (one hundred forty millimetre),73 mm (seventy three millimetre) height, top lid of 1.5 mm (one decimal five millimetre) thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm (three decimal three millimetre) round headed screws, one lock at the corners. Clamp shall be made of 12 mm (twelve millimetre) diametre M.S. bar bent to shape complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
27
-
-
Providing and laying 600x600 mm (Six hundred into six hundred millimetres) Vitrified tiles of Restile /Nitco / Rak /Kajaria (Eternity)/ Orient -Bell /AGL / Simpolo /Johnson / Somany of approved shade and design, in flooring etcetera laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
615.6
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimetre) thick stone slab over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement isto four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black,Cherry Red, Elite Brown, Cat Eye or equivalent as per approved drawing, design within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
24.3
-
-
Providing and laying 300x300 mm (Three hundred into three hundred millimetres) antiskid ceramic tiles of Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson tiles as per approved shade in flooring on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
98.46
-
-
Providing and laying 300x450 mm (Three hundred into four hundred fifty millimetres) Ceremic Glazed tiles of Nitco / Orient / Bell / Kajaria in skirting risers of steps and dados with cement mortar 1:3 (One cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
223.61
-
-
Providing and fixing 12mm.(Twelve millimetre) thick Unistone cladding on Reinforced Cement Concrete surface side as on faces of Arch masonry walls etcetera on 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
126.5
-
-
Providing and fixing 110 mm (One hundred ten millimetre) diametre on wall face unplasticised Rigid PVC (D-Plast) rain water pipes single socketed conforming to IS : 13592 Type A ISI marked of Finolex/Relpipe (Reliance) /Vectus working pressure not less than 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure), including jointing with seal ring conforming to IS : 5382 including jointing with seal ring leaving 10mm (Ten millimetre) gap for thermal expansion including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
128
-
-
Providing and fixing 110mm (One hundred ten millimetre) Coupler on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing 110mm (One hundred ten millimetre) Single pushfit coupler on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing 110mm (One hundred ten millimetre) Single tee with door on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing 110mm (One hundred ten millimetre) Single tee without door on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing 110mm (One hundred ten millimetre) bend 87.50 (eighty five degree) on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing 110mm (One hundred ten millimetre) plain shoe on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing 110mm (One hundred ten millimetre) unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
20
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 150mm (One hundred fifty millimetre) diametre and weighing not less than 440 (four hundred forty) grams complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.60 mm (zero decimal six zero millimetre) (+ 0.05 %) total coated thickness with zinc coating as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single lengthupto 12 (twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
280.1
-
-
Providing and fixing precoated galvanised steel sheet.Ridges plain 500 - 600mm (five hundred to six hundred millimetre) in roofing 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
78.6
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
7080.5
-
-
Steel work welded in built up sections/ framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1285.6
-
-
Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
42.26
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm (at the rate one decimal six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (two decimal two zero litre per ten square metre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
560.19
-
-
Providing 6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto Three sand) upto all floor levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
740.8
-
-
Providing 12mm (twelve millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for exterior plastering including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
870.1
-
-
Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
870.1
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm (at the rate one decimal six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (two decimal two zero litre per ten square metre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
470.4
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm (at the rate one decimal six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (two decimal two zero litre per ten square metre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
560.19
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etcetra complete, On steel work complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
94.14
-
-
Applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1980.1
-
-
Distempering Two coats with 1st (first) quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, (fifty grams per litre) of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1980.1
-
-
Melamine polishing on wood work (one or more coat) complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
59.85
-
-
Providing and Injecting chemical emulsion for pre-constructional anti termite treatment and creating a contineous chemical barrier under and alround the column pits, wall trenches.junction of wall and floor,along the external perimetre of the building,expansion joints,surroundings of pipes and conduits etc.and all wooden items. complete(Plinth area of the building at ground floor only shall be measured) for payment with chlorpyriphos 50% EC for pre-construction and anti termite in buildings . The chemical is to be used as (1 part of chlorpyriphos 50% EC with 49 parts of water).The work will be carried out to the satisfaction of Engineer-in-charge of the site as per the following stages including carriage of material in all leads and lifts.Stage-I :- The bottom of the foundation pit and sides upto 30 cm height by using the chemical emulsion @ 5 Ltr. Per sqm.Stage-II :- the backfill earth in immediate contact with the masonry walls inside the foundations shall be treated with the chemical emulsion @ 7.5 Ltr. Per sqm. of the vertical surface of the sub-structure for each side. The sprying shall be done after the ramming operation by rodding the earth at 15 cm. Closed to the walls surface. The treatment will have to be done in 2 or more stages depending upon the depth.Stage-III :- The top surface of the consolidated earth within the plinth walls under the floor. The chemical emulsion @ 5 Ltr. Per sqm. of the surface shall be sprayed before sand bed or sub grade is laid.At the junction of the walls and the floor holes shall be made 15 cm.apart by a crow bar and chemical poured into the holes.Stage- IV :- Along the external perimeter of the buildings a small trench shall be dug along the walls and chemical emulsion @ 2.5 Ltr per sqm. shall be sprayed . At points where pipes or condutes enter the building in the soil shall be treated thoroughly. complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
241.79
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 one cement isto three coarse sand (zone - III) isto six graded stone aggregate 20 mm (twenty millimetre) nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm (forty millimetre) nominal size, wellrammed and consolidated and grouted with fine sand,including necessary excavation, levelling & dressing & finishing the top smooth complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
40.8
-
-
Providing and laying 60mm (Sixty millimetre) thick factory made cement concrete interlocking paver block of NTC / Unistone / Atlantic vibro compacted upto M-50 (M-fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five millimetre) thick average thickness of cement mortar 1:4 (One cement isto Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
380.9
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I. brackets, 40 mm (forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
14
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm (six hundred thirty into four hundred fifty millimetre) with a pair of 15 mm (fifteen millimetre) C.P.nbrass pillar taps complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
20
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm (five hundred ten into one thousand forty millimetre) bowl depth 250 mm (two hundred fifty millimetre) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8
-
-
Providing and fixing 32 mm (thirty two millimetre) diametre P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Semi rigid pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8
-
-
Providing and fixing 40 mm (forty millimetre) diametre P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Semi rigid pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm (six millimetre) thick hard board backing Oval shape 450x350 mm (four hundred fifty into three hundred fifty millimetre) (outer dimensions) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
14
-
-
Providing and fixing 1216 15mm (fifteen millimetres) Outer diameters Polyethelene-Aluminium / Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera, with clamps at 1.00 (One) metre spacing for concealed work including cutting chases and making good the wall etcetera. This includes testing of joints complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
127.5
-
-
Providing and fixing 1620 20mm (Twenty millimetres) Outer diameters Polyethelene-Aluminium / Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera, with clamps at 1.00 (One) metre spacing for concealed work including cutting chases and making good the wall etcetera. This includes testing of joints complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
127.5
-
-
Providing and fixing 2532 32mm (thirty two millimetres) Outer diameters Polyethelene-Aluminium / Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera, with clamps at 1.00 (One) metre spacing for concealed work including cutting chases and making good the wall etcetera. This includes testing of joints complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
100
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm (thirty two millimetre) nominal bore complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8
-
-
Providing and fixing 150 mm (One hundred fifty millimetre) diametre high pressure PVC Spigot and Socket, waste and ventilating pipe ISI Marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
152.72
-
-
Providing and fixing 110 mm (One hundred ten millimetre) diametre high pressure PVC Spigot and Socket, waste and ventilating pipe ISI Marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
71.7
-
-
Providing and fixing 75 mm (seventy five millimetre) diametre high pressure PVC Spigot and Socket, waste and ventilating pipe ISI Marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
125.5
-
-
Providing and fixing 110 mm (One hundred ten millimetre) diametre PVC Plain bend ISI Marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
28
-
-
Providing and fixing 75 mm (seventy five millimetre) diametre PVC Plain bend ISI Marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
28
-
-
Providing and fixing 110 mm (One hundred ten millimetre) diametre PVC door bend with oval acess door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
25
-
-
Providing and fixing 75 mm (seventy five millimetre) diametre PVC door bend with oval acess door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
25
-
-
Providing and fixing 110x90mm (One hundred ten into nineteen millimetres) nominal size/diameter PVC floor trap ISI marked Finolex/Relpipe(Reliance)/ Vectus Conforming to IS-14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the
47
-
-
Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC single equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing 75 mm(Seventy five millimetre) nominal size PVC single equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing 150mm (One hundred fifty millimetre) nominal size PVC Collar of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
-
-
Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC Collar of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
15
-
-
Providing and fixing 75mm (Seventy five millimetre) nominal size PVC Collar of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diametres P.V.C clamps ISI marked of Finolex/Relpipe (Reliance)/Vectus etcetera including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
80
-
-
Providing and fixing 75mm (Seventy five millimetre) nominal size P.V.C clamps ISI marked of Finolex/Relpipe (Reliance)/Vectus etcetera including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
80
-
-
Providing and fixing square-mouth PVC gully trap complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four decimal five zero kilogram) and frame to be not less than 2.70 kg (two decimal seven zero kilogram) as per standard design complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
14
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five coarse sand (zone- III) isto three graded crushed stone aggregate 20 mm (Twenty millimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size finished with floating coat of neat cement complete as per standard design Inside size 90x80 cm (Ninety into eighty centimetres) and 45 cm (Forty five centimetres) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 kg (Thirty eight kilogramme) (weight of cover 23 kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme)) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five coarse sand (zone- III) isto three graded stone aggregate 20 mm (Twenty millimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded crushed stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded crushed stone aggregate 20 mm (Twenty millimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm (One hundred twenty into ninety centimetres) and 90 cm (ninety centimetres) deep including C.I. cover with frame (medium duty) 500 mm (Five hundred millimetres) internal diameter, total weight of cover and frame to be not less than 116 kg (One hundred sixteen kilogramme) (weight of cover 58 kg (Fifty eight kilogramme) and weight of frame 58 kg (Fifty eight kilogramme)) : With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
17
-
-
Extra for depth for manholes Size 90x80 cm (Ninety into eighty centimetres) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal fivecomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4.5
-
-
Providing and placing on terrace (at all floor levels polyethylene water storage tank, tripple layer of Finolex/Relpipe (Reliance)/Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ccomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8000
-
-
Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass. Bib tap of approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
16
-
-
Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass. brass long body bib cock of approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
64
-
-
Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass angle valve of approved quality including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
45
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%