Ropeway And Rapid Transport System Development Corporation HP Limited Tender

WorkShop Block(G+1)

Site Development

Levelling of site and Construction of protection work i.e. construction of Retaining/ Breast wall using Reinforcement Cement Concrete (RCC) according to approved design (confirming to relevant IS Codes ) vetted/ approval from any IIT/NIT and as per the final approval/direction of Engineer in Charge including excavation, disposal of surpuls excavated soil on approved dumping site and material in all lead and lifts/including all taxes and other incidental charges as per attached drawing, specification and direction / satisfication of Engineer-in-Charge. (Payment will be made on the basises of Retaining structure constructed in cubic contents)

Levelling of site and Construction of protection work i.e. construction of Retaining/ Breast wall using Stone masonary in cement mortar (Coursed rubble masonary (first sort or second sort)) according to approved design (confirming to relevant IS Codes ) vetted/ approval from any IIT/NIT and as per the final approval/direction of Engineer in Charge including excavation, disposal of surpuls excavated soil on approved dumping site and material in all lead and lifts/including all taxes and other incidental charges as per attached drawing, specification and direction / satisfication of Engineer-in-Charge. (Payment will be made on the basises of Retaining structure constructed in cubic contents)

Design and laying of intelocking concrete Block Pavements having thickness as given below as per drawings and technical specification of MORD 1500 on plain concrete sub base thickness based on SP-20 Pavement Design in approach road and surrounding paths as approved/ directed by Ensgineer-in-Charge with all lead and lifts/including all taxes and other incidental charges, building in all respect and to entire satisfaction of Engineer-in-Charge

For Approach Roads (80 mm thick Paver Block of grade M-40 or above as per design)

For Surrounding Paths(60mm thick paver block of grade M-30)

External Electrification

Providing and fixing street Lights of nos. as per drawing including fixture and SL, as per specifications and approved by engineer-in-charge. Making required connections to Building.(Installation, testing and commissioning of prewired,HPS / CDMTT 70/150/250/300 /LED Luminaire including supplying, complete with wiring with 3 x 2.5 sq mm wire and all accessories as required.)

Sewerage Treatment plant

Construction/Supply, installation, testing commissioning of Sewerage Treatment Plant/ETP of appropriate technology including civil work, tertiary treatment etc for the building /campus. Plant Size up to 50,000LDP with carriage of material in all lead and lifts/including all taxes and other incidental charges as per attached drawing, specification and direction & satisfaction of Engineer-in-Charge.

Lift/Elevator

Supply, installation, testing commissioning of following lifts having contract speed of 1.00 MPS in the lift shaft and having barrier free requirements as per appendix-VII of cpwd general specifications for electrical works (Part-III-Lifts & Escalators),2003 and as per detailed specifications enclosed as per speed -1.00 MPS having stops and opening one on same side, Machine: Fearless machine with permanent magnet motor controller- AC variable Voltage Variable frequency control operation-Automatic, Microprocessor based with/without attendent power-415 V, 3 Phase, 50 Hz, AC, 4 wire system Door operation-m Automatic door operation with adjustable door opening and closing timings, Car Size & Dimensions :As per the Design of the Manufacturer & as per the size of the existing Hoist way, Pit Depth :1600mm,Car Enclosure i):Car Ceiling Stainless Steel Hairline Finish ,Car Panels :Stainless Steel Hairline Finish ,Car Flooring PVC/ Granite,Car Illuminations LED,No of Entrance :One Location Front,Car Entrance: Centre Opening Power Door In Stainless Steel Hairline Finish, Door Safety: Full Height Infra Red Safety Curtains, Door Opening: 800mm (W) x 2000mm (H), Door Operator :DC Door Operator, Fair Rated Doors :Fair Rating 60 Minutes, Controller Type: ACD-MR, Drive: VF Regenerative (Closed Loop), Hand rails: Stainless Steel Mirror Finish hand rails on the rear car panels, Machine: Gearless, Traction Media: Flat Coated Steel Belt, Ventilation :Cross flow Fan with carriage of material in all lead and lifts/including all taxes and other incidental charges as per attached drawing, specification and direction & satisfaction of Engineer-in-Charge.

13 Passenger (844 kg) serving G+4 Floors without machine room

13 Passenger (844 kg) serving G+2 Floors without machine room