Ropeway And Rapid Transport System Development Corporation HP Limited Tender

Construction of Buildings Design, its vetting/ approval from any Indian Institute of Technology/Any NIT, Supply, Installation, Testing and Commissioning of Pre-Engineered pre Buildings including construction of reinforced cement concrete (R.C.C.) framed sub structure up to plinth and super structure with light gauge steel framed wall and trusses including all finishing work complete in all respect with all electrical installation with air condition of appropriate capacity as shown in drawing CCTV & Lan system, sanitary and water supply, plumbing & other public health services/fixtures including installation of Fire fighting with wet riser sprinkler system with automatic fire alarm system & fire tank as per NBC norms and Construction of over head water tank of 5000 Ltr capacity and C/o Rain Harvesting Tank 10,000 Ltrs and construction of underground sapetic tank 100 users tank capacity as per attached approved drawing & technical specifications in the RFP with all lead and lifts/including all taxes and other incidental charges, building complete in all respect and to entire satisfaction of Engineer-in-Charge.

Lift/Elevator Supply, installation, testing commissioning of 6 passenger capacity lifts (KONE/OTIS/JOHNSON/SCHINDLER) having contract speed of 1.7 MPS Serving (G+3) & (G+1) Floors in the lift shaft with stop and opening on same side and having barrier free requirements as per appendix-VII of cpwd general specifications for electrical works (Part-III-Lifts & Escalators) ,2003 . Machine: Gearless machine with permanent magnet motor controller- AC variable Voltage Variable frequency control operation-Automatic, Microprocessor based with/without attendent power-415 V, 3 Phase, 50 Hz, AC, 4 wire system Door operation- Automatic door operation with adjustable door opening and closing timings, Car Cabin Doors Size & Dimensions :As per the Design of the Manufacturer & as per the size of the existing Hoist way, Pit Depth :1600mm,Car Enclosure i):Car Ceiling Stainless Steel Hairline Finish ,Car Panels :Stainless Steel Scratch resistants Finish ,Car Flooring Granite,Car Illuminations LED,Number of Entrance :One Location Front,Car Entrance: Centre Opening Power Door another three sides of cabin Stainless Steel Finish , Door Safety: Full Height Infra Red Safety Curtains, Door Opening: 900mm (W) x 2000mm (H), Door Operator :DC Door Operator, Fair Rated Doors :Fair Rating 60 Minutes, Controller Type: ACD-MR, Drive: VF Regenerative (Closed Loop), Hand rails: Stainless Steel Mirror Finish hand rails on the rear car panels, Machine: Gearless, Traction Media: Flat Coated Steel Belt, Ventilation :Cross flow Fan with carriage of material in all lead and lifts/including all taxes and other incidental charges as per attached drawing, specification and direction & satisfaction of Engineer-in-Charge.

6 Passenger (408 kg) serving (G+1) Floors without machine room